Find Verified Car Antennas Suppliers, Manufacturers and Wholesalers

Mx-2-40 floor plate hydraulic lift
Capacity: 4000kg
Lifting height: 1800mm
Min. Height: 95mm
Height of the rack: 2794mm
Overal weidth: 3470mm
Width between pillars: 2930mm
Power supply: 2.2kw/220/380v
Gross weight: 600kg

Specification:
Dimension LxWxH: 980x700x1540
Max. Lift Heightú¦1090mm
Lift Capacity: 1200kg
Lift Speed: 32mm/sec
Post Working Range: 360íp
Electric Power: 1.1kw 220v/50Hz
Total Weight: 130kg.

1. Advanced and reliable sealing system. Adopts imported sealing brand, which has the characteristics of high-speed wear resistance and long service life.
2. The cylinder barrel is made of high-strength cold-drawn material, and the welding structure is reliable, which improves the overall strength of the cylinder.
3. The piston rod adopts an advanced electroplating process and with salt spray test grade 9/96 hours, to enhance the anti-corrosion and wear-resisting performance.
4. Burst pressure test up to 72.5MPa.
5. The material of front and rear bearings is POLYGON fiber composite.
6. The cylinder adopts multiple anti-loosening structures to ensure the reliable operation of each component without falling off.

Details:
ES202

Rack Length.................................5200mm
Rack Width...................................2000mm
Rack Height..................................560mm
Tower Power................................95KN
Range of Tower........................... 360¡ã
Max.Lifting Weight.......................3.5T
Net Weight...................................2.5T

Features:
1. The frame machine is made of high quality manganese plates, enjoys merits of high strength & rigidty,and long-life.
2. Hydraulic tilting platform with flexible assistant legs enable the platform to go up and down easily.
3. New type square towers can be moved smoothly alongside the platform and turn 360¡ã, make straightening from different positions possible, thus forcing endurance is more reasonable, enable workers to operate easier and safer.
4. Improved Euro-type towers, equipped with hydyaulic rod jack,flexible, time and labor saving.
5. Universal clamps are forged and heat-treated,enjoy good features of high strength and long life, can endure almost all deformation correction jobs.
6. The clamps are designed to have wide jaw as wide as 118mm, can fix both auto-skirt and frame.
7. Hydraulic system is collaborated designed and made, having strong power, long life and easy maintenance features.


Standard export packing.

Technical data:
work.
4. Hydraulic system with good design has powerful driving force, long life and low failure rate.
5. Portable measuring system is easier for workers.
6. Major clamps fix the auto quickly, firmly and accurately.
7. Top-quality welding with high strength and good-looking.

550 x 210 x 30 cm,
2200 kg,
3.465 m3

TPE 9301-PB
Application: Automobile dust guard
Color: Black; Injection Grade
Supply Ability: 10,000 metric tons per year.

25kg/bag.

Model Volume
(m) Load
(T) Gauge
(mm) Wheel Base
(mm) Wheel Diameter
(mm) Traction
(KN) Traction Height
(mm) Overall Size
(L*W*H)
KFU0.55-6 0.55 1.3 600 500 300 60 320 1552*850*1150
KFU0.75-6 0.75 1.88 600 600 300 60 320 1700*980*1250
KFU1.0-6 1.0 2 600 600 300 60 320 1910*1070*130
KFU1.2-6 1.2 3 600 700 300 60 320 2228*1070*1320

mine material car model MLC2-6 MLC3-6 MLC5-6 MLC5(3)-9 MLC3-9
loadage(t) 2 3 5 5 3
track gauge(mm) 600 600 600 900 900
contour dimension(mm) 2000*880*1150 1050*1200*1200 3450*1200*1200 3450*1230*1200 2100*1150*1300
wheel base(mm) 550 750 1100 1100 900
wheel diameter 300 300 350 350 350
heigth of towing attachment(mm) 320 320 320 320 320
allowed traction(kn) 60 60 60 60 60
overall weight(kg) 520 520 920 940 790

Model load(t) Track Overall dimension Wheelbase Dia. of wheel
Length Width Height
mm
YPC1-6-6 1 600 1500 850 400 500 300
YPC3-6-6 3 600 1900 1050 425 600 300
YPC3-7 3 762 1900 1050 425 600 300
YPC5-6 5 600 3000 1200 510 1000 400
YPC5-7 5 762 3000 1200 1650 1000 1000
YPC5-9 5 900 3000 1200 510 1000 320

Model Track mm Payload kg Operate Track QTY
ZCQ-6/9/1435-18 600/9/1435 18 pneumatic double
ZCQ-6-22 600/9/1435 22 pneumatic double
ZCQ-6-24 600/9/1435 24 pneumatic double
ZCQ-6-30 600/9/1435 30 pneumatic double
ZCQ-6-38 600/9/1435 38 pneumatic double
ZCQ-6-43 600/9/1435 43 pneumatic double
ZCQ-6-50 600/9/1435 50 pneumatic double
ZCQ-6-60 600/9/1435 60 pneumatic double
ZCQ-6-75 600/9/1435 75 pneumatic double
Model Track mm Payload kg Operate Track QTY
ZCQ-6/9/1435-18 600/9/1435 18 Handle single/double
ZCQ-6-22 600/9/1435 22 Handle single/double
ZCQ-6-24 600/9/1435 24 Handle single/double
ZCQ-6-30 600/9/1435 30 Handle single/double
ZCQ-6-38 600/9/1435 38 Handle single/double
ZCQ-6-43 600/9/1435 43 Handle single/double
ZCQ-6-50 600/9/1435 50 Handle single/double
ZCQ-6-60 600/9/1435 60 Handle single/double
ZCQ-6-75 600/9/1435 75 Handle single/double

The allowing impact speed of the vehicle 15-25km/h
The center of the buffer head to the rail surface height 850mm
Acceptable impact speed 10km/h,20km/h,25km/h,30km/h
For the subway,light rail and other vehicles 500mm,660mm,720mm,824mm
For the China railway high-speed and bullet train 1050mm

Model Track mm Payload(kg) Operate Track QTY
ZCQ-6/9/1435-18 600/9/1435 18 Handle single/double
ZCQ-6-22 600/9/1435 22 Handle single/double
ZCQ-6-24 600/9/1435 24 Handle single/double
ZCQ-6-30 600/9/1435 30 Handle single/double
ZCQ-6-38 600/9/1435 38 Handle single/double
ZCQ-6-43 600/9/1435 43 Handle single/double
ZCQ-6-50 600/9/1435 50 Handle single/double
ZCQ-6-60 600/9/1435 60 Handle single/double
ZCQ-6-75 600/9/1435 75 Handle single/double

The allowing impact speed of the vehicle 15km/h

The allowing impact quality of the vehicle 3000kn



The center of the buffer head to the rail surface height For the standard rail vehicles 850mm
For the subway,light rail and other vehicles 500mm,660mm,720mm
For the China railway 1050mm
Dimension 1400mm*1600mm*(H+300)
Safe location Front bumper, rear bumper, 5m

Descriptions:
Oil consumption: 2 - 3 (kg/hour)
Output heat power: 15-35 (kw)
Output heat: 15, 000-32, 000(kcal/h) / 60, 000 - 130, 000 (btu/h)
Distance from fire gun to flange: 173mm / 6.8 inch
Fire gun dia. : 90mm / 3.54 inch
Compressed air pressure: 0.05-0.1mpa
220v/50hz & 110v/60hz both available;
Package weight: 30kgs / 66lbs

Features:
1. Various fuels are applicable, e.G. Used engine oil, used vegetable oil, used crankcase oils, used glycerin, used hydraulic oil, used synthetic oils, waste machine shop cutting oil,
Waste mineral spirits solvent, waste grades #1, #3, #4 heating oils, waste mixed heavy oil etc.,
As well as regular oils, such as diesel, etc.
.2. Automatic ignition, workers-nursing unnecessary
3. Flame adjustable freely by air-inlet controller easily; from the ¡¡ãobserving window¡¡à operators can
Easily see changes of the flame.
4. All parts tested thousands of times and improved to be of good quality and reliable.
5.All errors readable from the front panel, thus sky burner is just ¡¡ãsmart burner¡¡à!
6. Complete fuel burning ensures very low emissions, reducing pollution as much as possible.
Environmentally ¡§cfriendly, exhausting air complies with the requirements of euro iii;
7. Big oil tank optional, as big as 100l container for holding waste oil, pumping system is held
At the top topump waste oil into burner machine; at the same time hold the burner machine during
Shipping from damage;
8. There is heating instrument at the bottom of big oil tank to pre-heat fuel before pumping,
Esp. Considerate for using in cold area.
9. Double safety design for pc program.

Export standard packing
27kg

ent types of mold types and specification for the automotive field , such as fuel boxes , fenders , paddle, etc. . From the companies of the army, we did all kinds of molds box as Incubator , carrying boxes , meter boxes , for staff of foreign companies , which perform molds and pots , fund sports box, hopper , water tank , fridge car , on the other hand , we also made the sweeping shell mold car, rust shoulder , car chassis rust . have yielded fruitful results in rotational molding mold design and manufacturing.
Main product: Rotomolding Machine, Rotomolding Equipment Rotomolding , Rotational Molding Machines, Rotomolding Mold, Rotational Molding Technology, rotomolding products , rotational molding , rotational molding ,

Outside Size(mm)
7040X5690X3450(LXWXH)

Inside Size(mm)
6900X4000X2650(LXWXH)

Main door(mm)
3000X2600(WxH)

Total Power
30kw

Wall panel
EPS colorful steel skin board, wall panel: 70mm thick, ceiling panel: 50mm thick. The side door with a pressure lock which will automatically open when the pressure inside is over-pressure

Basement
full grid, adjustable height, galvanized steel sheet construction, three embossed steel ramp

Inlet Fan
Capacity: 24000m3/h; Pressure: 800 Pa

Power: 4kw; Quantity: 2 sets

Outlet Fan
Capacity: 24000m3/h; Pressure: 800Pa

Power: 15kw; Quantity: 1 set

Circulation System
The circulation system covers a set of automatic valve and two sets of manual valve. Manual adjustment valves are placed in inhaling and exhaust duct to control airflow volume and adjust pressure. A stainless steel trapezoid hood and a stainless cone hood

Purification System
dual filtering structure, the primary filter can capture granules larger than 10 ª¦m. ceiling filter can capture granules bigger than 4ª¦m. the whole purification system has capacity of large volume of dust. Its filtering rate reaches 98%. air pressure balance gauge, TSPí_1.2mg/m3

Heating system
Italy Riello RG5S diesel burner, 260000Kcal/h, 20N damper motor, 2 sets quick dryer

Heating exchanger, stainless steel, argon arc welding, heating exchange rate 85%;

max temp:80íµ, heating time: 4-6min(20-60íµ),

fuel consumption:6-8kg/vehicle

Lighting System
ceiling Light: 32pcs 36w Philips lamp; bottom light: 32pcs 20w Philips lamp, 1100 Lux.

Control system
PLC digital controlling, soft touching button, spray & baking switch, light switch, emergency stop, breakdown alarm.

Environmental System
No-pump water curtain for mist filtering device can reduce more than 98% of the fog without the trouble of replacing drying-method filter by fully mixing fog, water and air, and ensure a qualified exhaust according to the relevant state standards.

Electrical Voltage
380V, 3 phases, 50HZ.

What is an air cushion truck for?

There are often customers calling to ask "what is the use of the air-cushion truck", they all say that the air-cushion truck has good mobility and accurate positioning. Is it really so useful? We will introduce the working principle, characteristics and application fields of the simple structure of the air cushion truck.


The air-cushion truck is simple in composition, mainly composed of an air conditioner, an air-cushion module, a main air pipe and a secondary air pipe.

The working principle of the air cushion truck:
The air cushion truck needs compressed air when it works. It can use the compressed air system inside the factory or use a separate air compressor. When the air cushion truck is inflated, the air bag expands to form a ring, and the air enters the air chamber from the air bag through the small hole, and the air bearing pressure is established in the air chamber, and the air is deflated to the surrounding and forms a very thin air film on the ground. Due to the small frictional resistance of the air film, the weight can be pushed, rotated and positioned in any direction with a small thrust.
Step 1: Inflate the compressed air into the rubber airbag at the bottom of the air cushion
Step 2: The rubber airbag is filled with gas and inflated at the bottom of the air cushion
Three steps: form an air film at the bottom of the air cushion to suspend the air cushion

Composition of air cushion truck Schematic diagram of air cushion truck
Composition of air cushion truck Schematic diagram of air cushion truck
What are the advantages of air cushion trucks:
1. It is suspended on the ground when working, so the friction force is small, and the traction or thrust required for movement is very small, that is to say, a few people can push the equipment of dozens of tons, saving manpower

2. Low pressure on the ground, can protect the ground well

3. It has the characteristics of good mobility. Under the condition of load, the air cushion truck can rotate on the spot, and the accurate positioning is impossible for ordinary transportation tools.

4. The air cushion truck runs smoothly and can be shockproof, such as the handling of precision equipment

Note: At present, our company's new air-cushion truck (blue series) has lower air consumption than other brands of air-cushion trucks, about 50% less air consumption, and is guaranteed for 4 years

Weight: 240gr/sqm
Thickness:60mm
Air velocity:1.3m/sec
Air flow rate:4680m3/h
Initial resistance:12pa
Final resistance:250pa
Medium arrestance:69.40%
Dust holding:3850gr/sqm
Max temperature:3500c
Flame resistance:f-1 din 53438.


Suitable for tranportation.

1.16 optical powered zoom with Auto Focus
2.Camera head rotation/vertical 270ípor horizontal 180íp
3.Built-in base lamp for slide / negative inputs
4.Three control modes Including wireless remote
5.Audio, Video and VGA input/output
6.Secure and durable LED lamps
7.External DC 12V power source


63X51.5X28.5 cm

Features:

1.Fast, effortless removal of glass, emblems, bonded body components, rusty bolts and much more.
2.Flameless heat reduces the need for torches, solvents and abrasives.
3.Less flame and solvents reduces potential safety hazards and insurance rates.
4.Only heats metal objects, enabling it to be used in or near heat-sensitive areas.
5.Wide range of heating inductors for increased versatility.
6.Easy-to-read heat output meter to quickly verify induction heat.
7.Output isolation transformer provides the safest possible operation.

Model: spq-1.5
Dimension: 300mm*300mm*220mm
Input: /input voltage: 2phases 220v
Working frequency: auto frequency locking and tracking.
Output power: 1.5kw
Tube length: 6m
Cooling system: air cooled
Working cycle: >45 minutes
Weight: 12kg


Model: spq-1.5
Dimension: 300mm*300mm*220mm
Input: /input voltage: 2phases 220v
Working frequency: auto frequency locking and tracking.
Output power: 1.5kw
Tube length: 6m
Cooling system: air cooled
Working cycle: >45 minutes
Weight: 12kg

MODERN Series Induction Heaters carry the most advanced transduction control technology. By long distance induction, electric power is transmitted into heated conductors efficiently and the temperature of conductors is quickly up. The series is the best equipments to remove collision stress from thick metals.

The heating way is direct, no fire, safety, efficient and green. It has been the best heating equipments for auto frame, chassis, connection plate, etc. before and after straightening. It avoids the hidden danger of fire heating.

The heating equipments are equipped with handle torch of different shapes, so more efficient.

Our SPQ-10 has air conditioning water cooling system.

SPQ-06 has water cooling system.

SPQ-1.5 has air cooling system and special for 4S car shop.


Specification:
SPQ-1.5 Dimension300mm*300mm*220mm
Input Voltage2phases 220V
Output Power1.5KW
Tube Length6m
Cooling SystemWater cooled
Weight12kg
Model
SpecificationSPQ-06
Input Voltage1 Phrase 220V/50~60HZ
Input Power 6KW
Water Pump Power0.33KW
Load duration rate60%
Host Volume900mmX830mmX590mm
Weight120KG
Hand lead line /weight¦µ5.5X20CM/2KG
Hand lead line extension6M
Water Tank 25L
Cooling systemAir Condition Water cooled
Circulation Period>60Mins

Wooden case

MODERN Series Induction Heaters carry the most advanced transduction control technology. By long distance induction, electric power is transmitted into heated conductors efficiently and the temperature of conductors is quickly up. The series is the best equipments to remove collision stress from thick metals.

The heating way is direct, no fire, safety, efficient and green. It has been the best heating equipments for auto frame, chassis, connection plate, etc. before and after straightening. It avoids the hidden danger of fire heating.

The heating equipments are equipped with handle torch of different shapes, so more efficient.
SPQ-1.5 has air cooling system and special for 4S car shop.
SPQ-06 has water cooling system.
Our SPQ-10 has air conditioning water cooling system.

It has a very high degree of efficiency and is water-cooled using a closed compressor-powered system. Through the use of automatic control monitors, the power output remains constant during the heating process.

The SPQ -06/10 is designed for heavy work demanding fast and thorough heating of the material, for example, for straightening of chassis, and for coarser parts and axles. This machine is convenient for heavy-duty vehicle repairs.

SPQ-06/10 Induction Heater is the top efficient equipment used for repairing heavy duty and car chassis. When using our induction heater, the temperature can be up to 600¡ãC within seconds,which can soften 5mm plate within 8 seconds and soften 8mm plate within 12 seconds. The induction heater can work over 60 minutes constantly, which can save your time and improve working efficiency with a steady performance.

Production feature:
1.high-quality wear -resistant steel guarantees a long service life
2.reliable drive components ensure smooth operation
3.high loading volume thanks to high water line
4.perfect driving characteristics thanks to a low center of gravity
5.weight-optimised truck mixers for a maximum payload
6.simple and fast cleaning thanks to smooth rear wall surfaces
Special spiral blade design,wear-resistant,smooth,no residue
High water level to ensure load
Low center of gravity,better driving characteristics
High-quality mixing drive system

Production feature:
1.high-quality wear -resistant steel guarantees a long service life
2.reliable drive components ensure smooth operation
3.high loading volume thanks to high water line
4.perfect driving characteristics thanks to a low center of gravity
5.weight-optimised truck mixers for a maximum payload
6.simple and fast cleaning thanks to smooth rear wall surfaces
Special spiral blade design,wear-resistant,smooth,no residue
High water level to ensure load
Low center of gravity,better driving characteristics
High-quality mixing drive system
TYPE:FYG5
Effective agitating:5
Geometric volume:7.5m
Rolling rate:0-16(r/min)
Angle:16
Weight:3040kg

1.Unique deck design for downpulls wherever you need them;
2.Towers move 360 degrees around the frame bed;
3.Adjustable collar on tower performs both straight and angle pulls;
4.Safe and easy locking mechanism on each tower to easily adjust in locking positions;
5.Front and rear removable cross members allow access for working under vehicle;
6.Disassembly cross member add fixed points;
7.Deck length 6000mm, deck width f¼c 2235mm, deck height f¼c 300mm to 1020mm;
8.Available with overhead beam;
9.Equipped with american style clamp.
10.Central oil supplying.






Carton and steel frame.

1. 360-degree tower can be placed at any point along the four sides of the bench for pulling
2. Tower pivots 180 degrees to allow for any pulling angle and locks into place by a single bolt
3. Each tower is equipped with one pneumatic pump, overhead beam and ram
4. Four pinchweld clamps mount directly to the sill flange of the vehicle
5. Comes with scissor lift and four wheel stands
6. Bench size is 3750mm*900mm*260mm to 1000mm
7. Lifting capacity is 3000kg.

1. Several installing methods, saving working space
2. Imported hydraulic, pneumatic and electric devices ensure smooth running
3. Equipped with self-locking and anti-explosion devices, safe and reliable
4. Attractive height, up to 2m
5. Bench length is adjustable, easy and convenient for various autos
6. Static powder coating, durable, anti-corrosion.

1. Equipped with 2nd lift, good synchronism
2. Accurate horizontal plane, convenient for high-precision four-wheel localization
3. Easy, quick tire disassembling and chassis repairing
4. Equipped with self-locking and anti-explosion devices, safe and reliable
5. Imported hydraulic, pneumatic and electric devices ensure running smoothly
6. Static powder coating , durable, anti-corrosion.

1. GB No.14 flange beam
2. Towers move 360 degrees around the frame bed
3. Adjustable collar on tower performs both straight and angle pulls
4. Vertical lift
5. Deck length f¦C 5200mm, Deck width f¦C 2000mm, Deck height f¦C 360mm to 600mm
6. Lifting capacity f¦C 3500Kg
7. 10 tons of pulling tower
8. Comes with 2 pneumatic pumps, loading ramps and clamping system
9. Equipped with 2nd lift.

howo light truck refittable
Class ii chassis, which is used for refitting special vehicles such as sprinkler, sweeper, oil tanker, etc. Has reasonable structure and superior performance, and can meet the requirements of various special vehicles for modification and use.

*Rated capacity(kg) 3500
*Lifting height(mm) 1950
*Lifting time(S) 50
*Lowering time(S) 40
*Motor power(kw) 2.2
*Passage width(mm) 2486
*Overall width(mm) 3370
*Overall height(mm) 2860
*Bottom clearance(mm) 110.


Suitable for tranportation.

3D wheel aligner
Model:SX-G6

Characteristics of 3D Wheel Alignment
1.3D cameras alignmentùBased on the car and not influenced by the platform
2.Measurement systemùequipped with double digital cameras and four target disk, supplying revolutionary measurement mode
3.Target diskùThere is no electronic components, so the wheel alignment will not has a component failure problem.
4.Equipment Calibration - once calibration before delivery, workable immediately after installation, no need for periodic calibration
5.Measurement progressùno need to compensate for steel ring , the precise eccentric compensation will be just once pulling or pushing the car back and forth
6.Software systemùùEasy to operate, complete conventional basic parameters within two minutes ,significantly faster than conventional aligners
7.Daily MaintenanceùEasily maintenance , download and upgrade freely for the model data.

Technical Specification:
Measurement project Accuracy Measurement range Measurement project
Display accuracy 1¦/1mm Display accuracy
Camber ¦2¦ ¦10¦ Camber
Caster ¦6¦ ¦20¦ Caster
Kingpin Inclination ¦6¦ ¦20¦ Kingpin Inclination
Toe-in & Toe-out ¦2¦ ¦20¦ Toe-in & Toe-out
Set back ¦2¦ ¦5¦ Set back
Thrust angle ¦2¦ ¦5¦ Thrust angle
Wheel Deviation ¦2mm Wheel Deviation
Axis Deviation ¦2mm Axis Deviation
Measurement project Accuracy Measurement range Measurement project.


Woodedn carton.

Product Details:
Design:Single Post
Type:induction control
Lifting Capacity:1200kg
Lifting Height(mm):1090mm
Overall Width(mm):700mm
Place of Origin:Shandong, China (Mainland)
Brand Name:Fly Tiger
Model Number:HX-120
Post Working Range:360.


Suitable for tranportation.

Brief introduction of howo warehouse gate type medium and short distance cargo transporters
The car has superior power performance, low oil consumption, stable and reliable performance, various personalized configurations, elegant cab, safety and comfort. It is suitable for transportation of short-distance light-bulb goods and vegetables in highway.