Use instructions
Important intermediates for organofluorine synthesis, advanced chemical synthesis, fluorine-containing surfactants, electroplating intermediates
Fatty alcohol polyoxyethylene ether, levelling agent O also known as flat plus O, is a non-ionic surfactant, the appearance of milky white or beige paste, high molecular weight, solid (can be made into flake solid according to the requirements), easily soluble in water, ethanol, ethylene glycol, turbidity point, PH value of 1% water solution is neutral. Resistant to acid, alkali, hard water, heat and heavy metal salt. It has strong evenness, slow dyeing, permeability and diffusivity for all kinds of dyes. It can be used in the same solution with all kinds of surfactants and dyes. Appearance milky white, beige paste or solid shape PH 6-8 turbidity point 91-96
Application�?�¯�?�¼?
1. As a non-ionic surfactant, the washing industry plays a role in emulsification, foaming, and decontamination. It is the main active ingredient of hand sanitizer, laundry detergent, shower gel, laundry detergent, detergent, and metal cleaning agent.
2. As a textile printing and dyeing auxiliary agent, the textile printing and dyeing industry plays an emulsifying role: emulsified silicone oil penetrating agent, leveling agent, polypropylene oil agent.
3. As a deinking agent, carpet detergent, and resin remover in the papermaking industry.
4. Other products such as pesticide emulsifiers, oil demulsifiers, lubricating oil emulsifiers, etc.
Dimethyl sulfoxide is an extremely important non proton polar solvent that is soluble in both water and organic solvents, it mainly used in dye, acrylic fibers, paint, coating, antifreeze and agriculture.
Application:
1. DMSO can be used for the extraction of arene, also as the reaction medium used for resins and dyes, and applied to acrylic polymerization and spinning solvent.
2. DMSO can be used as an organic solvent, reaction medium and the intermediates of organic synthesis. It is highly versatile. This product has a highly selective extraction capacity, and can be used as the polymerization and condensation solvent of acrylic resin and polysulfone resin, as the polymerization and spinning solvent of polyacrylonitrile and cellulose acetate, as the extraction solvent for separating alkanes and arenes, and as the reaction medium for the arenes, butadiene extraction, acrylic fiber, plastic solvents, organic and synthetic dyes, and pharmaceuticals industries. In the field of medicine, dimethyl sulfoxide has anti-inflammatory and analgesic effect with a strong capability of penetration through the skin, and thus being able to dissolve certain drugs and boost their penetration into the human body to achieve the therapeutic purposes. Taking this carrier property of dimethyl sulfoxide can make it be used as pesticide additives. Add a small amount of dimethyl sulfoxide in some pesticides can facilitate the penetration of pesticides into the plant in order to improve the efficacy. dimethyl sulfoxide can also be used as the dye solvent, dye removing agent, and dye carrier for the synthetic fibers. It can also be used as the absorbent of recycling acetylene and also the modifiers of synthetic fiber, antifreeze agent and the capacitor dielectric, brake oil, and extractant of the rare metals.
3. DMSO can be used as analytic solvents and fixing agent of gas chromatography as well as the solvent for analyzing UV spectra
Rhodium is also called trichloride rhodium is a kind of red brown powder easy deliquescence
Poisonous
No water molecular weight 20926 melting point of 450 500 C decomposition
The boiling point of 800 C sublimation
To generate more fluoride above 600 C
70 C can be hydrogen reduction
Insoluble in water acid soluble in cyanide Chemicalbook solution
In the concentrated acid sulfuric acid heat decomposition
When heated with sodium aluminum magnesium iron and other metals
5734 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
1.Aluminum sulfate is an inorganic substance with chemical formula of Al2(SO4)3 and formula amount of 342.15.
2.It is a white rasp-crystal crystalline powder with a density of 1.181g/ (25).
3.It is used as a precipitant for rosin wax emulsion and other adhesive materials in papermaking industry, as a flocculant in water treatment, and also as a retention agent for foam fire extinguishers to produce Aluminum white raw materials, oil decolorization deodorant and some pharmaceutical raw materials can also make artificial stones and advanced ammonium alum, accounting for about 50% of the total production of aluminum sulfate is used in papermaking,
4.The second largest use is in drinking water industrial water and industrial wastewater treatment as a flocculant, accounting for about 40% of the total production of aluminum sulfate When aluminum sulfate is added to such water, colloidal aluminum hydroxide flocs, which can absorb and precipitate bacterial colloid and other suspended matter, can be formed and used in drinking water treatment to control the color and taste of the water.
Sodium thisulfate is a common thiosulfate, a colorless transparent monoclinic crystal or white crystalline powder. Odorless, salty. The relative density is 1.667. Sodium thiosulfate is easily soluble in water and reacts with strong acid to produce sulfur and sulfur dioxide gas.Sodium thiosulfate is an antidote to cyanide. It is colorless, transparent crystal or crystalline fine grain.
1.It is used chemical raw material used as a fixer in the photographic, film and printing industries.
2.Used as a reducing agent in tanning. It is used in the paper and textile industries to remove residual bleach and as a mordant.
3.Used in medicine as an antidote for cyanide poisoning, etc.
4.In water treatment:
a) It is used as a dechlorination agent and fungicide for drinking water and wastewater.
b) Copper corrosion inhibitor for circulating cooling water.
c) Deoxidizer for boiler water system.
d) It is also used for the treatment of cyanide-containing wastewater.
Characteristic:
olefin sulfonate is a type of anionic surfactant processed by olefin gas-phase sulfonation and continuous neutralization. It has excellent emulsifying, decontaminating and calcium soap dispersing performances. Advantages include good solvency and compatibility, rich and fine foam, easy to biodegradation, low toxicity and low irritation to skin, etc. Especially in the application of non-phosphorus detergents, it has not only the good washing ability, but also good compatibility with enzyme agents. Powder (grain) shape products have good fluidity.
1. m-Cresol can be used as the dye intermediate of color film. And it also can be used in the production of pesticide such as pyrroboron, thiophosphorus sesquimide, inulin dichlorophenyl ether, resin and plasticizer, etc
2. m-Cresol can be used as an analytical reagent and as an intermediate in organic synthesis.
High quality Alkyl Dimthyl Amine Oxide 30% CAS 70592-80-2
Used directly to formulate detergents for household and industry use,used as raw material to produce kinds of detergent, emulsion.
1) Used as efficient emulsifying agent for polymerizing pressure sensitive adhesive. Dosage: 1�?�¢?�?�¼0.1%
2) As the main content of highclass detergent and cleaner, it can blench, remove stains and oil and resist static electricity.
3) Used as the antistatic additive with cleaning function for textile oil.
4) Used as efficient antistatic agent for polyester substrate and film base, especially for polyester base cinefilm and filmstrip. Dosage: 0.5% or so.
5) Used as the antistatic agent for polyolefine, polyester and other polymer materials.
6) Used as the antihygroscopic and anticaking additives for powdered chemical products that are easy to absorb moisture and agglomerate.
7) Used as good degreasant for quality leathers.
Surfactant Ammonium Laureth Sulfate CAS 32612-48-9 ALES 70%
Lauryl glycol polyether has antifoam properties. Polyether defoamer is a major variety of defoamer at present, which has the advantages of non-toxic, tasteless, non-irritating, resistant to hard water and acid and alkali, and good compatibility with the system. Compared with another class of silicon-containing defoamer, although its defoamer performance is not high, its anti-foam performance is quite excellent.
High quality Alkyl Dimthyl Amine Oxide 30% CAS 70592-80-2
Alkyl Dimthyl Amine Oxide
1. It is fatty tertiary amine oxide, in acid medium was cationic, and in alkaline medium was nonionic.
2. It has excellent thickening, antistatic, soft, decontamination and Increasingfoam performance.
3. For low irritant performance, which not only can effectively reduce the anionic detergent irritant, but also has a bactericidal, Ca-soap dispersion, vulnerability to biological degradation and so on.
Sodium hempetaphosphate, an inorganic compound, is a white crystalline powder, soluble in water, insoluble in organic solvents, mainly used in the food industry as quality improvers, pH regulators, metal ion chelators, adhesives and expansion agents.
Sodium tungstate is a kind of inorganic substance, chemical formula is Na2WO4, it is colorless crystalline or white crystalline powder, weathering in dry air, losing crystal water at 100C, soluble in water, insoluble in ethanol, relative density 3.23 ~ 3.25, melting point 698C (anhydrous).
1. Sodium tungstate used for mordant, analytical reagents, catalysts, water treatment agents, manufacturing fire prevention, waterproof materials,.and phosphotungstate, borotungstate and so on.
2. Sodium tungstate used for manufacturing metal tungsten, tungstic acid, tungstic acid and so on.
3. Sodium tungstate used for mordant, pigment, dye, ink.
4. Sodium tungstate textile workers used as fabric weighting agent, this product is used as fabric additives, by sodium tungstate, ammonium sulfate ammonium phosphate and other mixtures for fiber fire and waterproof. This fiber can be used to make fireproof rayon and rayon. Also used for leather tanning.
5. Sodium tungstate used for electroplating coating corrosion.
6. Sodium tungstate used as a solvent to introduce porcelain glaze color material can rise and fall low firing temperature and complement color effect.
7. Sodium tungstate used in petroleum industry and aviation, aerospace material manufacturing.
8. Sodium tungstate Used as an indicator in analytical chemistry experiments.
Is a nitrogen containing halogen-free environmentally friendly flame retardant, which is a type II polyphosphate. This product has a high degree of polymerization, good thermal stability, low moisture absorption, and low addition amount, can help reducing costs.
It is different from halogenated flame retardants. During the combustion process, the product expands the carbon layer to achieve heat insulation and air isolation, to achieve the flame retardant effect. It is low smoke, low toxicity, and no melting droplets. It is an efficient inorganic environmentally friendly flame retardant material.
The pH value is close to neutral, without corrosion to production equipment, reducing equipment maintenance costs. It can work synergistically with aluminum hydroxide, resulting in better results
Type II polyphosphate has a wide range of applications, including fireproof coatings for buildings, ships, trains, and cables. It is also the main raw material for compounding flame retardants such as plastics and rubber. It is also suitable for materials such as plastics (PP, PE, PVC, etc.), polyester, rubber, and various high-end intumescent fireproof coatings.
It is a nitrogen containing halogen-free environmentally friendly flame retardant, which is a type II polyphosphate. This product has a high degree of polymerization, good thermal stability, low moisture absorption, and low addition amount, can help reducing costs.
It is different from halogenated flame retardants. During the combustion process, the product expands the carbon layer to achieve heat insulation and air isolation, to achieve the flame retardant effect. It is low smoke, low toxicity, and no melting droplets. It is an efficient inorganic environmentally friendly flame retardant material.
The pH value is close to neutral, without corrosion to production equipment, reducing equipment maintenance costs. It can work synergistically with aluminum hydroxide, resulting in better results
Type II polyphosphate has a wide range of applications, including fireproof coatings for buildings, ships, trains, and cables. It is also the main raw material for compounding flame retardants such as plastics and rubber. It is also suitable for materials such as plastics (PP, PE, PVC, etc.), polyester, rubber, and various high-end intumescent fireproof coatings.
Defoamer
A defoamer or an anti-foaming agent is a chemical additive that reduces and hinders the formation of foam in industrial process liquids. The terms anti-foam agent and defoamer are often used interchangeably. Strictly speaking, defoamers eliminate existing foam and anti-foamers prevent the formation of further foam. Commonly used agents are insoluble oils, polydimethylsiloxanes and other silicones, certain alcohols, stearates and glycols. The additive is used to prevent formation of foam or is added to break a foam already formed.
The defoaming agent is resistant to high temperatures, light in color, has good water dispersibility, is not prone to fish eyes and shrinkage cavities, and has no oil slicks or demulsification. It is suitable for all types of coatings and emulsions, water-based resins, and adhesive systems.
It is used widely as an industrial intermediate to manufacture polyethylene terephthalate (PET) and dioctyl terephthalate (OECD, 2001). It is used in the Polyester Film (Audio/Video Tape, X-ray Film, Photo Film), Polyester Fiber, Pet Bottle, Polyester Adhesive, Engineering Plastics. DMT is volatile, it is an intermediate in some schemes for the recycling of PET.
Red mercury sulfide is used in oil painting, printing mud and China's famous vermilion carved lacquer, can also be used as ink, paint, rubber and other bright red color, or used in medicine. Black mercury sulfide is used in the pharmaceutical industry and as a pigment for paint, rubber, etc
1,4-Butenediol (also known as 1,4-But-2-ene-diol) is a colorless liquid with two hydroxyl groups, making it a versatile intermediate in organic synthesis. It is part of the diol family and has both reactive hydroxyl and unsaturated carbon-carbon double bonds, which give it unique chemical properties. It is soluble in water and commonly used in the production of polymers, resins, and pharmaceuticals. Its bifunctional nature allows for cross-linking and polymerization, making it essential in various industrial applications.
5734 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
