Heavy Melting Steel (HMS):
Heavy melting steel is a designation for recyclable steel. It is categorised into two major categories: HMS 1 and HMS 2. The difference between the two is HMS 1 does not contain galvanized and cast iron, whereas HMS 2 does. Because both grades guarantee a minimum piece thickness â?? at least 1/4inch (6.3mm) for HMS 1, and 1/8 in for HMS 2 â?? consignments have a high density.
The typical constituents are plates, truck parts, structural items, large machinery parts, automatic parts, pipes, post consumer steel goods.
Quality Heavy metal ,Iron Scrap/ Metal scrap HMS 1 and HMS 2 scrap steel for sale
R50- R65 - IRSI CODES;
The chemical composition is the standard for R-50 R-65 Tee rails original weigh 50 pounds per yard or heavier,6 meters long and over. Material to be suitable for rerolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails, rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from end of the piece of rail. Free from Fluff, Nonferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings any organic waste any other harmful substances. Dirt, dust, rust fluff and other impurities not allowed over 05 %. The rails are to be neatly bundled and secured with iron wire or straps, provided with adequate lifting hooks. Individual bundles not to exceed 5 MTW. Used Rails R50 - R65
Chemical Composition Used Rails;
C: 0, 54 - 0,82
Si: 0,18-0,40
Mn: 0, 60-1, 05
S: 0.04 max
P: 0,035 max
As.: 0, 01 max of Mass share
Norms: R-50 GOST7173-75 and R-65 GOST-8165-75
The scrap consists of R-50 (51, 67 kg/m) R-65 (64,72 kg/m)
Used Rail ISRI 27-29 ISRI-CODES;
(27) Rail, Steel No. 1. Standard section tee rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch, and guard rails, or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail.
(28A) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 18 inches long and under.
(28B) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 2 feet long and under.
(28C) Rail, Steel No. 2 Cropped Rail En ds. Standard sec t ion, original weight 50 pounds per yard and over, 3 feet long and under.
(29) Rail, St eel No. 3.Standard section tee, girder, and/or guard rails, to be free from frog and switch rails not cut apart, and contain no manganese, cast, welds, or attachments of any kind except angle bars. Free from concrete, dirty and foreign material of any kind.
The rails can be cut to the length the buyer wants
Heavy melting steel is a designation for recyclable steel. It is categorised into two major categories: HMS 1 and HMS 2. The difference between the two is HMS 1 does not contain galvanized and cast iron, whereas HMS 2 does. Because both grades guarantee a minimum piece thickness â?? at least 1/4inch (6.3mm) for HMS 1, and 1/8 in for HMS 2 â?? consignments have a high density. The typical constituents are plates, truck parts, structural items, large machinery parts, automatic parts, pipes, post consumer steel goods.
Chemical Composition:
C:0.06 â?? 0.082%
Mn:0.75 â?? 1.05%
SI:0.13 â?? 0.28%
P: Max 0.035%
S: Max 0.045%
Ar: Max 0.15%
We supply all kinds of Cast Iron Scrap with good price and good service.All the product is available contact us for more details.
Cast Iron Scrap for sale. Free from mud, dust, fluff, non ferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings, any organic waste and any other harmful substances. Dirt, dust rust, fluff and other impurities not allowed over 1%.
Type: HMS Scrap
Composition: iron Scrap Metal
Application: Melting
HMS Type: HMS1 & 2
Packaging Details: Bulk and Customers preferences
d) All scraps shall be free of explosive and oily materials and woody substance in any event.
We are engaged in offering a quality tested array of PVC Scrap. The PVC Scrap we offer is extensively used in several processes of plastic industry for designing different types of plastic items. We offer the following
PVC medical tubes and bags
PVC Window profile scrap
PVC pipes scrap
We can ship anywhere in the world and we are looking for serious buyers.
PVC BLISTER IN BALES
PVC MEDICAL GRADE
PVC soft transparent medical bags and regrinds
PVC Window and Door Profile Scrap Regrind for Sale
PVC soft medical tubes regrind available at affordable prices
PVC Soft Medical Tubes and Bags Scrap For Sale
Bales grinded PVC rigid regrind scrap for sale
PVC FLEXIBLE MEDICAL GRADE SCRAP
PVC CD DVD PC SCRAP
PVC CRUSHED PIPES SCRAP
PVC Pipe Regrind Scrap
Clean and transparent soft pvc price of pvc scrap
PVC used pipe rigid regrind / shredded / bales, grey , yellow, blue, black colour
"CPU scrap board" typically refers to the circuit boards or electronic components that come from discarded or obsolete computer central processing units (CPUs) and related electronic devices. These boards contain various materials, including metals, plastics, and small electronic components. Here are some key points about CPU scrap boards: Composition: CPU scrap boards are composed of a substrate, often made of fiberglass or other materials, on which electronic components are mounted. These components include microprocessors, memory chips, resistors, capacitors, and other integrated circuits. Metals Content: The boards may contain valuable metals, such as gold, silver, copper, and palladium. These metals are often used in the manufacturing of electronic components for their electrical conductivity and corrosion resistance. Recovery of Precious Metals: Recycling CPU scrap boards is a common practice to recover precious metals. Precious metal reclamation is typically done through processes like mechanical separation, chemical leaching, and refining. Environmental Considerations: Recycling CPU scrap boards is important for environmental reasons. It helps reduce electronic waste (e-waste) and minimizes the environmental impact associated with the disposal of electronic components. Economic Value: The recycling of CPU scrap boards can have economic benefits due to the recovery of precious metals. The value of the scrap depends on the market prices of the metals at the time of recycling. Processing Methods: Various methods are used to process CPU scrap boards for recycling, including manual dismantling, mechanical shredding, and chemical processes to extract metals. Regulations: There are regulations and guidelines in many regions regarding the proper disposal and recycling of electronic waste, including CPU scrap boards. It's important to adhere to these regulations to ensure environmentally responsible practices.
Top Quality Pure 99.9% Aluminium Ubc Scrap Beverage Can Scraps
Aluminum can Scrap (UBC) - Aluminium Used Beverage Cans Scraps
This is an aluminium cans scrap which is generated from beverage cans.
The cans are free from dirts, dusts, water and oil. This is ongoing supply and we are capable of meeting your qauntity requirements.
If you are interested in our product, Please write us with your email and phone number for more information, product pictures and fast reply.
USED BEVERAGE CANS ALUMINIUM SCRAP FOR REMELTING.99,5% AVERAGE ALUMINIUM CONTENT.
Bundles must be banded with a minimum of 16mm (width) x 0,80mm (thickness) Polyester straps.
The integrity of the bundles must be as safe as they can be stacked for storage, and
bundle height must not exceed 1.50 meter.
UBC scrap Specification
1. Mainly used for melting ingot
2. Discontinuous melting with scrap
3. Easy control and operation
4. Fast melting
5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on
6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.
Applications:
1. Mainly used for melting ingot
2. Discontinuous melting with scrap
3. Easy control and operation
4. Fast melting
5. Energy saving This Scrap Aluminum is produced in the production of industrial waste. Such as: Scrap Aluminum Wire, Scrap
Aluminum block and so on
6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted
auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferrous, electronic waste etc.
Aluminum scrap
Density: 2.702g/cm
Melting point: 660.37
Boiling point: 2467.0
Features: Free from Nuts, Steel plate, paint
Chemical Composition: AL
Appearance: Silvery White
We are manufacturing, distributing and trading a comprehensive range of 99.9% Copper Honey Brass Scrap that conforms to international quality standard norms. We are the right choice for obtaining superior quality brass Scraps. Copper Scraps that we supply are on massive demand owing to their usage in fabrication of utensils, copper wires, alloys for different industries etc. apart others. Highly ductile and superior performance distinguishes them from other variants available in the markets.
Quick Details :
Place of Origin: Germany/Poland /Spain
Brand Name: Brass
Model Number: 99.9% Copper honey brass Scrap
Type: Brass Honey
Copper Content: 99.99%
Supply Ability
Different types of brass scraps that are used for recycling or for recovering pure brass, include - brass electrical parts, brass sanitary, brass pneumatic parts.
TEST RESULT :
Copper: 99.9%
Carbon: 0.03%
Phosphorus: 0.01%max
Coblet: 0.01%max
Sulphur: 0.01%max
Iron: 0.005%max
Zinc: 0.003%
Scrap Contains
-Cables
-Scrap Motor Winding wires
-Bus Bar Strips, etc
Used As A Raw Material In
- Copper Wire Drawing Units
- Foundries
- Copper Utensils Manufacturing Units
- Automobile Industries.
We are a company specialized in producing PET flakes with good standards we have our factory. Main Products: Clear PET Flakes, light/blue PET Flakes, Green PET Flakes, Granules, Mixed color PET Flakes. Export Percentage: 71% - 80%. We supply high quality product, good price, best services, custom designs as well as delivery on time so please remember us. We welcome to work with various organization, groups, and traders of gifts and other cooperative.
Introduction of Pet Bottle Flakes
Pet Bottle Flakes are obtained post-consumer from recycled PET bottles. It is a light-weight, high-strength plastic material. Pet Bottle Flakes is blow moulded, injection moulded and extruded to produce bottles, films and injection moulded parts.
1.Type:PET Flakes
2.Style:Hot Washed
3.Color:Light Blue
4.Feature:High Quality
Used PET bottles will be recycled through physical recycling methods. It produces small pieces of regular size and consistent shape, namely recycled Pet Bottle Flakes , through recycling processes such as crushing, removing labels, removing impurities, washing, and drying.
Application of Pet Bottle Flakes
PET bottle flakes are mainly used in the textile industry, such as polyester staple fiber, the production of carpets, wadding cotton, non-woven fabrics, etc. Other cases like regenerated silk, which is used to produce high-end textile materials, such as blankets, sofas, curtains, clothing, etc.
At the same time, it is also used in the modified plastics industry, such as alloys, high-barrier materials, glass fiber reinforced materials, etc., which are used to make household appliances, automobiles, computers and other parts.
599 Light Melting Scrap (Lms) Suppliers
Short on time? Let Light Melting Scrap (Lms) sellers contact you.
