Find Verified Table Mats Suppliers, Manufacturers and Wholesalers

The world's first water made for optimum nutrition. High quality mountain spring with 7.2 pH, naturally purified water and again completely naturally enriched.
Unique filtering method with High pulse-silver ionization that allows the uniform dispersion of silver ions in the water, nearly 100 micrograms per liter, value approved by The World health organization as a product for everyday use.
Additionally the water is filtrated with the Zeolite and the Shungit minerals, the atomic structure of which allows them to capture heavy metals, bacteria and microbes, but not only. They also give off iron, zinc, and magnesium into the water.

Our water is unique bouquet of different natural processes so in the end we have the best water in the world, with the best nutrition.

Sizes of the oak parquets are 20 x 100~200 x 500 ~ 2000 mm t&g

# Callipers Measuring range of 0-1000 mm;
# With and without fine tunning;
# Material – constructional or stainless steel;
# Mat chromed scale;
# Reading – 0.1 and 0.05 mm.

# Special callipers 3-point vernier calliper;
# 5-point vernier calliper;
# Marking-off vernier calliper;
# Weld seam gauge;
# Other types.

# Vernier depth gauges Measuring range of 0-500 mm;
# Reading 0.1 and 0.05 mm;
# Material – constructional or stainless steel;
# Mat chromed scale.

# Micrometers Measuring range of 0-25; 25-50; 50-75; 75-100 mm;
# Reading – 0.01 mm;
# Measurement reading surface of hard alloys (carbide).
Range 0-25 mm.

# Coordinate small size tables One-coordinate;
# Two-coordinate;
# Three-coordinate;
# Stroke along the coordinate: 0-25 mm

# Measuring stands Type A2 – with magnetic switch at the base;
# Type A4 – with cast-iron base and T-shaped groove;
# Type B3 – with square-riffled table;
# Micrometer holder.

# Smooth gauges Plug gauges – one sided;
# Plug gauges – two sided;
# Snap gauges.

# Thread gauges Thread plug calipers – one sides;
# Thread plug calipers – two sides;
# Thread ring gauges.

# Smooth rings Reference rings;
# Setting rings
Range: 6-150 mm.

# Squares and rulers Flat squares;
# Squares with base;
# Checking rulers;
# Templates.

# Angle gauges Protractor with lock screw
Range 80x120 – 300x500 mm;
# Protractor with sliding rod
Range 120x240 – 300x500 mm Reading - 1°

# Marking-off tools (scribers) Straight scriber – one sided (with knurled handle);
# Bended tip scriber – two sided (with knurled handle);
# Trammel for tracing and marking with small base;
# Vernier caliper with two needles and fine adjustment;
# Height gauge with fine adjustment.

Technical characteristics FU 251M FU 301 FU 321M FU 361 FU 401
Table size mm 250x1120 300x1250 320x1350 360x1500 400x1600
“T” slots – number x size mm 3x14 5x14 5x18 5x18 5x18
Table swivel – left and right (º) 45 45 45 45 45
Longitudinal table travel
- manual mm 820 950 1000
(1250)* 1150
(1250)* 1250
- automatic mm 800 930 980
(1230)* 1130
(1230)* 1230
Cross table travel
- manual mm 280 320 360 360 360
- automatic mm 260 300 340 340 340
Vertical table travel
- manual mm 410 410 460 460 460
- automatic mm 390 390 440 440 440
Max. Distance from table top
to spindle axis mm 440 440 490 490 490
Spindle nose taper ISO 40 40 50 50 50
Number of spindle speeds 18 18 18 18 18
Spindle speed range rpm 40-2000
(50-2500)* 40-2000
(50-2500)* 32-1600
(40-2000)* 32-1600
(40-2000)* 32-1600
(40-2000)*
Number of table feeds 18 18 18 18 18
Table feed rate
- x,y mm/min 12.5-630
(16-800)*
(20-1000)** 12.5-630
(16-800)*
(20-1000)** 12.5-630
(16-800)*
(20-1000)** 12.5-630
(16-800)*
(20-1000)** 12.5-630
(16-800)*
(20-1000)**
- z mm/min 5-262
(7-334)*
(8-415)** 5-262
(7-334)*
(8-415)** 5-262
(7-334)*
(8-415)** 5-262
(7-334)*
(8-415)** 5-262
(7-334)*
(8-415)**
Table rapide traverse mm/min 2500/1040 2500/1040 2500/1040 2500/1040 2500/1040
Main motor power kW 4 5.5 7.5 7.5 7.5
Feed motor power kW 1.5 1.5 2.2 2.2 2.2
Machine weight kg 1975 2025 2850 2900 2925

* - option

Note: All the milling machines could be manufactured with control of the movement of the axes by joystick, and frequency adjustment of the feeds

Technical Data K5-320 K5-400
Planer
Max. Planer Width mm 320 400
Work Table Length mm 1560 1920
Max. Planing Thickness mm 4 4
Cutter Shaft Speed R/min 5200 5200
Number Of Cutters 3 3
Cutter Shaft Dia. mm 86 86
El. Motor Power kW 2.2 3
Thicknesser
Max. Planer Width mm 320 400
Work Table Length mm 550 690
Max. Planing Thickness mm 180 220
Max. Planing Heigh mm 3 3
Cutter Shaft Speed R/min 5200 5200
Number Of Cutters 3 3
Feeds m/min 8 8
El. Motor Power kW 2.2 3
Boring Device
Table Dimensions mm 400/250 (500) 400/250 (500)
Longitudinal Travel mm 100 (150) 100 (150)
Cross Travel mm 100 (150) 100 (150)
Vertical Travel mm 100 (150) 100 (150)
Max. Drill Dia. mm 16 16
Drill Speed R/min 5200 5200
Spindel Moulder
Spindle Diameter mm 30 (50) 30 (50)
Spindle Speed R/min. 6000 6000
Vertical Stroke of Spindle mm 130 130
Max.Ttool Diameter mm 170 170
Dimensions Of Worktable mm 850 / 450 850 / 450
El. Motor Power kW 2.2 2.2
Circular Saw
Saw Blade Diameter mm 300 300
Saw Blade Speed R/min. 3700 3700
Max. Depth Of Cut mm 85 85
Dimensions Of Worktable mm 850 / 450 850 / 450
Spindle Dia. mm 30 30
El. Motor Power kW 2.2 2.2 or 3
Tenoning carriage
Dimensions of worktable mm 450/750 450/750
Machine dimensions
Net weight of the machine Kg 540 580
Length mm 1600 2000
Width mm 1140 1700
Height mm 1000 1100

Property PE 100MA PE 130MA PE 160MA PE 200MA
Nominal press force: 1000 kN 1300 kN 1600 kN 2000 kN
Carriage strokes: 18, 30, 51, 72, 85, 98, 115, 129, 146, 150 (mm) 19, 25, 38, 60, 82, 102, 120, 140, 155, 165 (mm) 20, 28, 43, 60, 77, 94, 117, 131, 149, 167, 180 (mm) 21, 33, 61, 117, 143, 165, 184, 200, 211, 220 (mm)
Carriage height regulation: 100 (mm) 100 (mm) 100 (mm) 110 (mm)
Maximum number of strokes/min: 65 60 50 45
Distance carriage - table: 400 (mm) 440 (mm) 460 (mm) 520 (mm)
C-Frame depth: 330 (mm) 360 (mm) 400 (mm) 420 (mm)
Working height of the table: 800 (mm) 800 (mm) 800 (mm) 800 (mm)
Distance between the columns: 440 (mm) 490 (mm) 530 (mm) 510 (mm)
Bolster plate dimensions: 1100x660x80 (mm) 1200x660x80 (mm) 1300x780x90 (mm) 1400x800x100 (mm)
Electrical motor power 7.5 (kW) 11 (kW) 15 (kW) 15 (kW)
Power of the auxiliary electrical motor regulating the carriage lifting 0.75 (kW) 0.75 (kW) 0.75 (kW) 0.75 (kW)
Machine weight without tools and accessories: 8600 (kg) 9800 (kg) 14000 (kg) 16000 (kg)
Power supply/frequency/phase ~ 380 V, 50 Hz, 3f ~ 380 V, 50 Hz, 3f ~ 380 V, 50 Hz, 3f ~ 380 V, 50 Hz, 3f
Pneumatic system pressure 5.5 – 6 (bar) 5.5 – 6 (bar) 5.5 – 6 (bar) 5.5 – 6 (bar)
Maximum number of clutches per minute 15 (cl/min) 15 (cl/min) 15 (cl/min) 15 (cl/min)
Maximum weight of the instrument mounted on the carriage: 180 (kg) 300 (kg) 500 (kg) 500 (kg)

Hand knitted merino wool blankets.
The blankets are woven of the high quality wool.
We present hand-knit by hand products from merino wool.

Sew on your size. Send us what size you want and will tell you tsena.Tsenata is tentatively around 110 euro per m2

The most common use is for a blanket as a decoration on a sofa or bed, baby blanket or carpet. But many of our customers use and to decorate the table, a bed to a chair or seat kola.Prilozhenieto these beautiful products is a matter of your imagination.

Available in several colors: White, Brown, Black, Gray, Naturally
gray, Bordeaux, Man.