The world's first water made for optimum nutrition. High quality mountain spring with 7.2 pH, naturally purified water and again completely naturally enriched.
Unique filtering method with High pulse-silver ionization that allows the uniform dispersion of silver ions in the water, nearly 100 micrograms per liter, value approved by The World health organization as a product for everyday use.
Additionally the water is filtrated with the Zeolite and the Shungit minerals, the atomic structure of which allows them to capture heavy metals, bacteria and microbes, but not only. They also give off iron, zinc, and magnesium into the water.
Our water is unique bouquet of different natural processes so in the end we have the best water in the world, with the best nutrition.
Technical Data K5-320 K5-400
Planer
Max. Planer Width mm 320 400
Work Table Length mm 1560 1920
Max. Planing Thickness mm 4 4
Cutter Shaft Speed R/min 5200 5200
Number Of Cutters 3 3
Cutter Shaft Dia. mm 86 86
El. Motor Power kW 2.2 3
Thicknesser
Max. Planer Width mm 320 400
Work Table Length mm 550 690
Max. Planing Thickness mm 180 220
Max. Planing Heigh mm 3 3
Cutter Shaft Speed R/min 5200 5200
Number Of Cutters 3 3
Feeds m/min 8 8
El. Motor Power kW 2.2 3
Boring Device
Table Dimensions mm 400/250 (500) 400/250 (500)
Longitudinal Travel mm 100 (150) 100 (150)
Cross Travel mm 100 (150) 100 (150)
Vertical Travel mm 100 (150) 100 (150)
Max. Drill Dia. mm 16 16
Drill Speed R/min 5200 5200
Spindel Moulder
Spindle Diameter mm 30 (50) 30 (50)
Spindle Speed R/min. 6000 6000
Vertical Stroke of Spindle mm 130 130
Max.Ttool Diameter mm 170 170
Dimensions Of Worktable mm 850 / 450 850 / 450
El. Motor Power kW 2.2 2.2
Circular Saw
Saw Blade Diameter mm 300 300
Saw Blade Speed R/min. 3700 3700
Max. Depth Of Cut mm 85 85
Dimensions Of Worktable mm 850 / 450 850 / 450
Spindle Dia. mm 30 30
El. Motor Power kW 2.2 2.2 or 3
Tenoning carriage
Dimensions of worktable mm 450/750 450/750
Machine dimensions
Net weight of the machine Kg 540 580
Length mm 1600 2000
Width mm 1140 1700
Height mm 1000 1100
# Callipers Measuring range of 0-1000 mm;
# With and without fine tunning;
# Material – constructional or stainless steel;
# Mat chromed scale;
# Reading – 0.1 and 0.05 mm.
# Vernier depth gauges Measuring range of 0-500 mm;
# Reading 0.1 and 0.05 mm;
# Material – constructional or stainless steel;
# Mat chromed scale.
# Micrometers Measuring range of 0-25; 25-50; 50-75; 75-100 mm;
# Reading – 0.01 mm;
# Measurement reading surface of hard alloys (carbide).
Range 0-25 mm.
# Coordinate small size tables One-coordinate;
# Two-coordinate;
# Three-coordinate;
# Stroke along the coordinate: 0-25 mm
# Measuring stands Type A2 – with magnetic switch at the base;
# Type A4 – with cast-iron base and T-shaped groove;
# Type B3 – with square-riffled table;
# Micrometer holder.
# Smooth gauges Plug gauges – one sided;
# Plug gauges – two sided;
# Snap gauges.
# Thread gauges Thread plug calipers – one sides;
# Thread plug calipers – two sides;
# Thread ring gauges.
# Squares and rulers Flat squares;
# Squares with base;
# Checking rulers;
# Templates.
# Angle gauges Protractor with lock screw
Range 80x120 – 300x500 mm;
# Protractor with sliding rod
Range 120x240 – 300x500 mm Reading - 1°
# Marking-off tools (scribers) Straight scriber – one sided (with knurled handle);
# Bended tip scriber – two sided (with knurled handle);
# Trammel for tracing and marking with small base;
# Vernier caliper with two needles and fine adjustment;
# Height gauge with fine adjustment.
Standard Machine Specification LCC 800 LCC 1000 LCC 1250
CAPACITY:
Centers height mm 410 510 625
Swing over bed mm 890 1090 1320
Max. turning diameter over guideways for lathes with turret head mm 750 750 1000
Swing over cross slide mm 490 690 940
Swing in gap mm 1050 1250 1500
Width of bed mm 700
Distance between centers mm 1500, 3000, 4000, 5000
Max. turning length in chuck and live center for lathes with turret head mm 1150, 2650, 3650, 4650
MAIN SPINDLE:
Spindle bore mm 155
Spindle nose DIN55027 No. 15
Spindle hole internal taper Metric 160
Front bearing diameter mm 200
HEAD STOCK:
Spindle speed in two ranges rpm 2 - 250; 8 - 1000
Main motor power kW 30
Spindle max. torque Nm 5000
FEEDS:
Longitudinal feeds (Z-axis) M/min 10 (max)
Cross feed (X-axis) M/min 10 (max)
Rapid traverse (Z-axis and X-axis) M/min 10 (max)
Crosslide maximum travel mm 525 525 650
Z-axis feed torque N.m. 26.1
X-axis feed torque N.m. 10
CNC SYSTEM
Options HEIDENHAIN, FANUC, SIEMENS, FAGOR
TOOLHOLDER TURRET HEAD
Tool section mm 40 x 40
Diameter of boring bar mm 40
Turret head position number 8 or 12
TAIL STOCK:
Quill diameter mm 125
Quill internal taper Morse No.6
Quill travel mm 250
Tailstock movement Motorized
NET WEIGHT
DBC 3000 mm Kg 8800 9300 9800
Hand knitted merino wool blankets.
The blankets are woven of the high quality wool.
We present hand-knit by hand products from merino wool.
Sew on your size. Send us what size you want and will tell you tsena.Tsenata is tentatively around 110 euro per m2
The most common use is for a blanket as a decoration on a sofa or bed, baby blanket or carpet. But many of our customers use and to decorate the table, a bed to a chair or seat kola.Prilozhenieto these beautiful products is a matter of your imagination.
Available in several colors: White, Brown, Black, Gray, Naturally
gray, Bordeaux, Man.
