Find Verified Embedded Systems Suppliers, Manufacturers and Wholesalers

Product Specification
Power Range : 1.0 HP to 2.0 HP
Operating Speed : 0 - 3100 RPM
DC Power Range : 900 Wp - 2000 Wp
DC Voltage Range : 70 Vmp - 110 Vmp
Head Range : 30 Mtr - 90 Mtr
Discharge Range : 8000 LPD - 30000 LPD
Type of Duty : S1

- Zero Running Cost
- Less Maintenance
- Eco-Friendly
- Simple Installation
- Pollution Free

Material Of Construction - Motor
Part Grade
Mechanical Seal : Graphite Ceramic
Motor Shaft : Stainless Steel
Motor Body Pipe : SS-304
Lower Hosing : Aluminum
Diaphragm : High Nitrile butyl rubber
Top Cap : Stainless Steel
Bottom Plate : Stainless Steel
End Cap : Stainless Steel

MATERIAL OF CONSTRUCTION SCREW (HELICAL) PUMP
Part Grade
Outlet : SS-304
Suction : SS-304
Outer Shell : SS-304
Rotor Screw : Stainless Steel
Stator : Rubber Coated Alloy
Material Of Construction Centrifugal Pump
Part Grade
Check valve housing : SS-304
Check valve : PC
Suction : SS-304
Outer Shell : SS-304
Impeller : POM
Bowl : PC
Pump Bush : NBR
Pump Sleeve : Stainless Steel
Pump Shaft : Stainless Steel
Coupling / Pump Couple : Stainless Steel

Catenary lighting pole system from the LBS 6000 series, used to suspend luminaires across streets, squares and pedestrian zones. Steel body hot-dip galvanised to EN ISO 1461 and electrostatic powder-coated in any RAL colour, designed to the EN 40 pole standard. Heights, arm geometry and cable tensioning hardware are configured to the project; anchor cage and base plate supplied. Static calculation and shop drawings issued with the quotation. Medra Global Dis Ticaret Ltd. Sti. is the official overseas trade office of the manufacturer (Farkoon Lighting / LTS Aydinlatma, Turkiye) and manages the full export operation. Technical drawings and photometric files (LDT / IES) are supplied with every quotation; DIALux project support available. Mixed models accepted in one order. FOB Istanbul, CIF or DAP on request. The 2026 interactive flipbook catalogues are online at medra-kataloglar.netlify.app. The listed price range is indicative only - the final quotation is issued per enquiry, based on order quantity, configuration, RAL finish and destination.

The V8 DRS Solar Pumping System is a configurable solar-powered water-lifting solution designed for agricultural irrigation, livestock watering, and remote water-supply applications. It is intended to support efficient water delivery from suitable water sources while reducing dependence on conventional electricity. Depending on the selected configuration, the system may incorporate a surface or submersible pump, solar-compatible motor, and dedicated controller. Its practical arrangement supports installation flexibility, routine maintenance, and reliable daytime operation. Available with different motor powers, flow capacities, pumping heads, and electrical configurations, the V8 DRS series can be supplied to meet specific project requirements for farms, gardens, reservoirs, and rural infrastructure.

Key Specifications
Specification Details
Product Type V8 DRS Solar Pumping System
Model / Series V8 DRS
Pump Design Surface or submersible pump, depending on model
Power Source Solar photovoltaic power system
Motor Type Solar-compatible electric motor
Pump Material Stainless steel, cast iron, or engineering-grade materials, depending on model
Color Metallic, blue, or manufacturer-specific finish
Construction Compact, solar-compatible pumping assembly
Motor Power Available in different HP / kW configurations
Voltage Available in different AC or DC configurations, depending on model
Frequency 50 Hz or as specified for the selected configuration
Flow Capacity Available in different discharge options
Pumping Head Available in different head configurations
Solar Panel Capacity Selected according to pump power and operating requirements

Warranty:
5 years

Classification:
Other

Certification:
ISO, CE

Brand Name:
OEM

Model Number:
EM01-000-16

Place of Origin:
China

Product name:
Embedding O Ring

Color:
white, pink, blue

Size:
4x2.8x0.9cm

Material:
plastic

We customize various steel, stainless steel, brass insert, embedded part with knurl. They can be put into mold or assemble after production.

Bronc cross embedded PP halter
Size:- Pony,cob,full
Color:- Black, Brown, Tan, purple,yellow ,green, skyblue etc
Material: Leather
Hardware:-Crystals, iron and steel fittings
30-40 pieces in a carton of dimension:- 22x22x22 inches or as per our buyer requirement for custom packaging if necessary according to demands.
delivery in 15-30 days or it may be vary due to effects of COVID-19 pandemic.

Dear sir/madam
We are manufacturer and exporter of turnout rugs, rain rugs, Summer Rugs, Australian Check Summer Rugs with Front Leather Closing, Australian Canvas Rugs with front leather closing, Australian mesh Rugs front leather closing, Australian Kool coat with front leather closing and all other kind of rugs here from Kanpur, india.
Harness for horses, western Bronc halters, western headstall, western breastplates, western show halters etc attach are some photos and catalog of products which we are producing and manufactured by ourselves, we are good and reliable manufacturer of all kind of equestrian products here from Kanpur, india.
We produce saddle, pads, rugs, bridles, bling goods etc.. and due to manufacturing point of view we offer the good products under very lowest prices.
You can see our wide range of products. Plus let us know which products you are interested we surely show you the best articles for that and with best prices.
Our recent productions are Western Bronc Halters, western headstalls, western breastplates, show Kathy halters, Bling Leather bridles, Bling leather reins, Bling leather halters, Bling leather leads, Bling leather belts etc.
Kindly browse our website there you can see a lot of useful products for you.
Any questions just feel free to ask. NGSE kashif

1006.00 aisi 304 - stainless steel with lid
Size: 140x310 mm
Exworks price: usd 24.00


2006.00 sae 1020 - galvanized carbon with lid
Size: 140x310 mm
Exworks price: usd 17.00

We offer full suite of power protection equipments, from line interactive to Single / Three phase output UPS systems upto 200KVA capacity, customized to meet the requirements of all mission critical applications of the IT, Telecom, Medical and Industrial Automation & Control Systems. Have strategic alliance with leading international power electronics company.

Specifications:-
Microprocessor based
High AC-AC efficiency
ISO 9001:2000 certified product.
Ergonomically designed
Galvanic isolation to load through transformer
Wide input window
Generator Compatible
Optional Harmonic Filters to minimize THD at the input.
Intelligent ripple-free battery charging management
Optional remote panel displays
Optional manual By-pass
Hot - Standby Configurations
High MTBF
Static switches for load sharing options
SNMP compatible (optional)


This is an intelligent, compact, eco-friendly, high efficient; microprocessor based online double conversion, single-phase/three phase output UPS system, with ratings up to 200KVA.

The aluminum fins are embedded in a spiral groove about 0.25~0.5mm deep on the surface of the steel pipe, while the metal extruded from the spiral groove is rolled back to the fin root. This specialized manufacturing process is a hallmark of high-performance G finned tubes.

The biggest advantage of this G fin tube is that it has good thermal performance, the working temperature can reach 350-400, and the fin temperature can reach 260, and the maximum use temperature of G type finned tube is 350 as stipulated in GB/T 15386-94, the national standard of air cooler.

The disadvantage is that the fins and tubes of the two metals in the atmosphere are prone to electrochemical corrosion, poor corrosion resistance and high cost. The tube wall has stress concentration and cannot be used for medium and high pressure applications. If the pressure is not squeezed well (the edge of the spiral groove is not close to the aluminum sheet), its heat transfer performance is worse than any finned tube.

G-Type finned tubes, also known as grooved finned tubes or embedded-fin tubes, are one of finned tube types where the "G" stands for grooved. These tubes are formed by twisting a fin strip, typically made of copper or aluminium, into a machined groove on the outer surface of the tube. The fin strip is then back-filled to securely lock it in place, ensuring a tight fit. The base tube material is completely surrounded and filled by the fins.

The specific materials, dimensions, and groove designs of G finned tubes can vary depending on the application requirements and operating conditions. Factors such as fluid characteristics, operating temperature, and pressure influence the selection of materials to ensure optimal heat transfer performance.

In summary, G-Type finned tubes are a robust and effective solution for high-temperature heat transfer applications. Their grooved design and secure locking mechanism provide strength and durability, enabling efficient heat exchange and contributing to overall system performance.

Why G-type Finned Tube?
Grooved finned tubes offer several advantages. The grooved design significantly increases the surface area of the tube, enhancing heat transfer efficiency. These G type fin tubes provide excellent strength and durability, making them suitable for applications requiring high-temperature heat transfer. The tight fit of the fins ensures efficient heat dissipation or absorption.

Grooved finned tubes are typically made of materials like copper or aluminium. The selection of the material depends on factors such as the application requirements, operating temperature, and compatibility with the working fluid.

The grooved design of the fins increases the surface area of the tube, allowing for better heat transfer. This enhanced surface area facilitates efficient heat dissipation or absorption, leading to improved overall heat transfer performance.

1007.00 aisi 304 - stainless steel without lid
Size: 140x310 mm
Exworks price: usd 20.00


2007.00 sae 1020 - galvanized carbon without lid
Size: 140x310 mm
Exworks price: usd 16.00

Flushing System

Conveyor Systems

Arm System

Fuel Systems

Cuplock System

Kwikstage System

All types of Color and variant availables.

1. Point 1.
Connector for oral-cleaner, no electric power required.
2. Point 2.
Connector for Soft-water bubble shower.
3. Point 3.
a. After directly connected to faucet, available to supply clean water by separating foreign substances, heavy metals, chlorine,
and hard water without using a filter.
b. A system capable of bubble shower and bubble oral-cleaning by strongly changing the flow rate of tap water with a
specialized WellDa System structure to generate huge bubbles.
4. Point 4.
a. Air pocket structure to separate foreign substances at the bottom of the system.
b. Foreign substances, heavy metals, etc. can be stored separately from clean water for a certain period of time in the air pocket
space.
5. Point 5.
a. One-touch valve, pollutant discharge valve.
b. The valve is periodically opened once a month and for 10 seconds, or depending on the daily usage, so that heavy metals and a device capable of discharging foreign substances.

Power supply is generated by hydropower, wave power / wave energy, coal fired, nuclear, wind power and also solar from sunlight

The safest means is by solar power followed by wind power as they are environment friendly. Solar power is the conversion of energy from sunlight into electricity either directly using photovoltatics, indirectly using concentrated solar power which uses lenses or mirrors with tracking systems to focus on a large area of sunlight into a small beam. Made from efficient solar cells and conforming to international standards, performance and reliability are not compromised.

Advantages of using solar system are:

Solar power is a renewable resource
Non-polluting
Energy and heat from the sun is free
Solar cells require little maintenance
No moving parts to be replaced or maintained
Replacement after 20 years
Very versatile used in cars, water heaters, buildings, satellite, aviation, street lighting, remote telecommunications systems, highway emergency phones

Walkthrough Frame

CODE : EFC-8001
Walkthrough frames are the gateways that support a scaffolding structure, and allow construction labors to walkthrough them without any hassle.

Product Features :

Most common type prefabricated scaffolding frame is able to walk through.
Scaffolding frame is Light weight, easy to handle and assemble.
Walk through frame can be mobile scaffolding used with caster wheel.
Different tube diameters and thickness can be adopted to attain different loading capacity.
Walk through Scaffolding frame can be made in different height and length for various construction conditions.
Walkthrough frames are available various styles, shapes and sizes. You can also request for custom walkthrough frames to handle your specific scaffolding requirements. Following is the standard product specification of walkthrough frame:

Product Specification :

Material: Q235,
Surface treatment: Hot dip glavanized; powder coated; painting
Frame: Tube; Frame ladder; Coupling pin; Screw base jack; Side bracket; Caster; Board; Transom; Tripod
Color Options: Red; Grey; Light Blue; Black; Dark Green; Yellow; Dark Blue; Orange;
Frame types: American frame, Euro frame, Japanese frame, Frame parts
JRS Scaffolds is an experienced scaffolding manufacturer and exporter of scaffolding products. We manufacture high quality walk through frames that match international quality standards, and deliver 100% customer satisfaction. We have trained and certified workforce to design and manufacture scaffold products that meet your expectation. Feel free to contact us to learn more about our scaffolding walkthrough frames.

High Power Partner of APC by Schneider :

Our decade old Partnership with APC has afforded us access to new vistas.
Ganpati Electricals is a HIGH POWER PARTNER of APC. We couch for this top slot due to our quality based systems and high deliverance in the marketplace.
We have won the accolade of ‘Best Electrical Partner of APC.

About APC:
APC, with a global footprint, is a known world leader in UPS and other Power Conditioning Systems. In 2006 the acquisition of American Power Conversion by Schneider Electric led to the fusion of two most formidable brands in UPS industry - MGE and APC.

Clever electronics fuelled with continuous innovations has posited APC to create Green UPS Systems with a low single digit impact on energy sources. APC UPS Systems are endowed with Advanced Technical and Functional Propositions due to which they stand apart.

Technical High Points of APC UPS Systems:
Six Pack IGBT based Rectifier
Input PF 0.99 & Input THDi 3%
Wide Input Voltage Range
High Overload and Discrimination Capacity
Customized Battery Backup time
Digital Monitoring of Battery Bank
Advanced Monitoring Protocols
Low Cost of Ownership

Widest Installations in India - Sector wise:
IT & ITES
Healthcare
Education
Telecom
Oil and Petro Chemicals
Manufacturing Industries
BFSI
Defense and Aerospace
Media and Entertainment
Hospitality
Infrastructure