GFRP rebar is made of high-strength glass fibers along with a highly durable resin. These
products are developed as a superior alternative to steel in concrete reinforcement. It is
widely used to reinforcing concrete in applications where it is exposed to water, salt water
or chemical environments
- Typical Advantages:
- Non-Corrosive â?? It will not corrode when exposed to a wide variety of corrosive substances
- including chlorides
- High Strength-to-Weight Ratio â?? best reinforcement for weight sensitive reinforcement
- Non-Conductiveâ?? It is excellent electrical and thermal insulator
- Excellent Fatigue Resistanceâ?? performs best in cyclic loading solutions
- Impact Resistanceâ?? It resists sudden and severe point loading
- Magnetic Resistance â?? completely non-effective to electromagnetic fields; excellent for
use in electromagnetic testing facilities
- Light Weight easy to transport, no need for lifting equipment, easy to handle
The adjustable louver allows you to control the amount of air entering the building by allowing you to adjust the angle of its fins.
Made of galvanized sheet, galvalume, pintro, kynar, or stainless steel with galvanized hardware. Additionally, it can be manufactured with mosquito net or aviary for added protection, as well as allowing the placement of lters to control the entry of dust.
DESIGN
Custom made according to the project.
Thickness of 4 or 6.
Perimeter moldings designed according to the type of wall.
Made of galvanized sheet, galvalume pintro, kynar cal. 22.
Optionally it can be manufactured in natural aluminum
or stainless steel cal. 18.
Quick and easy installation on site.
Light and durable.
A type of gypsum processed by heating natural gypsum, which results in a fine powder used in construction and medical applications. Used in construction, Medical industry, Dental Care and Fire Proofing, etc.
Refractory Mortar are heat resistance binding materials which are used in binding Refractory brick lining. Monolithic refractories include refractory castable, refractory mortar, spray mass etc.
We offer two types of refractory mortar according to its application including
Thermotax is a ready to use air setting refractory mortar. It is air setting mortar having good strength on air drying, forming strong joints & conferring an almost monolithic structure to the fire brick work. Moreover, it is highly suitable for Insulation brick lining work as well as refractory Brick lining work.
Refractor Castable are heat resistance binding materials which are used in binding Refractory brick lining. Monolithic refractories include refractory castable, refractory mortar, spray mass etc.
We offer wide range of refractory castable such as :
Conventional Castable
Super Castable, Fire crete, HEAT - A Castable, HEAT- K Castable
Low & Ultra Low cement Castable
MON -45, MON-60, MON-70, MON-80, MON-90
Gunning Castable
MONGUN-45, MONGUN-60, MONGUN-70
Insulating Castable
INSUCAT-9, INSUCAT-11, INSUCAST-13, INSUCAST-15
The CORI is the product for the direct reduction unit:
First, it will be stored in product passivation silos, its transportation by conveyors. After that, it will be stored in the warehouse for further use.
Production rate fo312 T/H. Assuming 8,000 hours of annual
operation, this equates to in annual production of 2,500,000 tonnes.
-IRON: (Rod a Benton):Hot-rolled product in multipurpose steel for high-adherence construction, weldable in RB 500 grade. NA 8634(2015) and ISO 6935-2 (2015). Diameter:
A wide range of diameters: 8,10,12, 14, 16,20,25,32,40 mm.
Length :12m (-0mm +100mm) with the possibility of making specific lengths of less than 12m according to customer demand for diameters ranging from 8mm to 16mm.
12m to 18m for diameters ranging from 16mm to 40mm.
Marking :
A specific AQS marking is engraved on the rebar bars for the diameters: 8,10,12,14,16mm And the identifying code AQS-diameter-RB500 for the diameters: 16,20,25,32,40mm
- Portland Cement 42.5 (Bags, Bulk)
-Wire rod: of round section with a diameter varying between 5.5 mm to 14 mm, of high quality.
The round and smooth wire rod is obtained by hot rolling in accordance with the Algerian standard an 8634 and according to international standards.-The Fields Of Use Of Wire Rod Are As Follows:- Drawn Wire-Welded Mesh-Nail, Tie Wire, Galvanized Wire- Gabions- Barbed Wire-Spring Wire- Bolt-Nut-Screw- Paperclips-Pickup Wire-Welding Wire
-BILLET: A billet is a section of metal used to roll into bars and shapes. It can be produced with ingots or directly by continuous casting. Billets are used as raw materials or for extrusion, forging, rolling and other metal processing operations.
Condition: new
Type: jaw crusher
Application: metallurgy, highway, railway, building materials, road constrcution, water conservancy, mining, chemical industry, quarried material, recycling.
Motor type: ac
Motor power(w): 15kw
Capacity(t/h): 5-20t/h
Place of origin: henan, china (mainland)
Brand name: yuhong
Model number: 250*400
Dimension(l*w*h): 1430*1310*1340mm
Weight:3000kgs
Certification: iso, ce
Warranty: 1 year after-sales
Service provided: engineers available to service machinery overseas
Color: be customed
After-sale service: for whole using life
Spare parts: for whole year
Raw materials:limestone, caco3, ore, concrete, granite
Installation: under our engineer's guide
Discharge size: 20-50mm
Max feeding size: 200mm
Capacity: 5-20t/h
Specifications
1. Certificate: iso, ce
2. Oem serive
3. 20 years experience
4. 5-20 t/h
Introduction
This series jaw crusher has properties of large crushing ratio, even granularity, simple structure, reliable operation, easy maintenance, and low cost. So this kind of jaw crusher can be widely used in mining, metallurgy, building material, highway, railway, water project, chemical industry, etc, for crushing various materials with compression strength less than 320mpa.
Main advantages:
We will send one set free mould together with main machine;all kinds of moulds can be customized.
Very low price, can be operated easily;
This type brick machine can produce pavers, standard bricks and hollow blocks.
Moulds:
H paver:
Paver.Jpg
Hollow block:
Hollow block mould.Jpg
Insulating brick :
Ib block.Jpg
2029511809[1]
Related conditions needed:
Operating requirements:
Working shed Other
Working site: 1300sq.M Staff and workers: 2-3
Working shed: 300sq.M Power distribution: 18kw
Raw material work shop: 300sq.M Water consumption: 3t/day
Office: 30sq.M Pallet: 1000pcs
Raw materials of the brick:
Wide range of raw materials could be adopted such as fly ash, coal residue, coal wastes, chemical residue, sand, stone, concent, cement, construction wastes and so on. Therefore, it is a new tpye of machine which has the characteristics of energy conservation and environmental protection.
2.View of our company
We care every step of manufacture process, and pay attention for quality inspection. Make each manufacture step be perfect.
We sell more than 150~180 sets brick machines to overseas every year, each set we will test installation in our factory, make sure not any little problem happen in buyer's jobsite
.Jpg
3. Oversea service and clients:
With advanced technology and prompt service, we build long business with world customers, such as poland, rumania, russia, australia, new zealand, canada, panama, ecuador, peru, chile, algeria, kenya, south africa, zimbabwe, philippines, indonesia, kazakhstan, mongolia, egypt, etc.
Main advantages:
We will send one set free mould together with main machine;all kinds of moulds can be customized.
Very low price, can be operated easily;
This type brick machine can produce pavers, standard bricks and hollow blocks.
2.Components of one set qt4-26 building materials machinery :
Feeding width:914mm
Effective width:610mm
Total motorpower:17.9kw
Bending power: 3.0kw+1.1kwx2;
Sewing power: 2.2kw
Cutting power: 3.0kw;
Forming power: 7.5kw
Cutting: hydraulic cutting
The depth of the groove:203mm
Equipped with generator
Material of roller shaft: 45# steel, galvanized
Material of rollers: 45# steel, quenched with hard chrome
1. The rollers and shafts are both solid, the rollers are made by 45# steel plated with hard chromium.
2. Our machine can be divided in to two cutting ways, one is hydraulic, and the other is mechanical. Controlling system include manual and automatic. It can be also designed according to your requirement
3. Our hoisting tool is light and handy; the weight of hoisting tool of our company is 2kg. It is convenient to install and uninstall the hoisting tool. Its hoisting speed is quick.
Controlling system: plc&manual
Feeding width:914mm
Effective width:610mm
Total motorpower:17.9kw
Bending power: 3.0kw+1.1kwx2;
Sewing power: 2.2kw
Cutting power: 3.0kw;
Forming power: 7.5kw
Cutting: hydraulic cutting
The depth of the groove:203mm
Equipped with generator
Material of roller shaft: 45# steel, galvanized
Material of rollers: 45# steel, quenched with hard chrome
1. The rollers and shafts are both solid, the rollers are made by 45# steel plated with hard chromium.
2. The thickness of our arch shaping leaf is 10mm, the process of manufacture for our arch shaping leafs are controlled by computer.
3. The length of the finished sheet is measured by the electronic measurement instrument or mechanical measurement instrument.
4. Our machine can be divided in to two cutting ways, one is hydraulic, and the other is mechanical. Controlling system include manual and automatic. It can be also designed according to your requirement.
5. Our helping hand wheel and the counter are used in adjustment of the bending of arch sheet, which makes the operation simpler.
6. Our hoisting tool is light and handy; the weight of hoisting tool of our company is 2kg. It is convenient to install and uninstall the hoisting tool. Its hoisting speed is quick.
Controlling system: plc&manual
This material is mainly used in the indoor decoration as super class buildings. Such as hotels, restaurants, shopping malls theaters, dancercise, cinemas, stations, auditoriums, offices, sitting rooms, business buildings, electronic workshops, precision apparatus rooms and industrial or residential buildings.
Specifications:
1) size: 595 x 595mm, 600 x 600mm, 603 x 603mm, 595 x 1195mm, 603 x 1212mm
2) thickness: 7mm, 7.5mm, 8.0mm, 8.5mm, 9.0mm, 9.5mm
3) White color and aluminium foiled surface
Ip 55 enclosures
Mutiple feet locations
Aluminium frame, end shields and base
High strength cable gland
Shaft key and protector suppplied
Superior paint finish
S1 duty
Utilise vacuum impregnated
Class f insulaton
condition:new
type:eco interlocking brick machine
brick raw material:clay
processing:brick molding machine
method:hydraulic pressure
automatic:no
capacity:2600pcs/8hr
place of origin:shandong, china (mainland)
brand name:fulang
model number:fl1-20
dimension(l*w*h):3300x1500x1600mm
voltage:free
power:12hp
certification:iso9001:2000 &ce
warranty:one year
after-sales service provided:engineers available to service machinery overseas
model:fl1-20 hydraulic interlocking bricks machine moving
pressure:16mpa
shaping cycle:20s
condition:new
type:interlock block making machine
brick raw material:clay
processing:brick molding machine
method:hydraulic pressure
automatic:semi automatic
capacity:2600-3000pcs per day
place of origin:shandong, china (mainland)
brand name:fulang
model number:fl1-25 compressed earth block making machine
voltage:220v/240v/380v/440v/adjustable
power:5.5kw
dimension(l*w*h):1500x600x1400mm
certification:iso9001:2000 &ce
warranty:1 year
after-sales service provided:engineers available to service machinery overseas
overall size:1500x600x1400mm
shaping cycle:20 seconds
presure:16mpa
total weight:400kgs
Wooden packaging
141797 Builders Hardware Construction Material Equipment Suppliers
Short on time? Let Builders Hardware Construction Material Equipment sellers contact you.
