Find Verified Bar Counters Suppliers, Manufacturers and Wholesalers

Specification: titanium bar

Grade: Gr1, Gr2, Gr3,Gr5(6AL-4V), Gr7,Gr12

Application: medical industry

Titanium Bar Manufacturer for Medical & Industrial Applications

As a professional titanium bar manufacturer, we specialize in the production of high-performance titanium bars and rods for medical, aerospace, chemical processing, and industrial engineering applications.

Our manufacturing scope covers CP titanium and titanium alloy grades, supplied in compliance with international standards and tailored to project-specific requirements.

This page provides an overview of our titanium bar and rod manufacturing capabilities, material grades, standards, and typical application scenarios to support technical evaluation and RFQ preparation.
Titanium Bar & Rod Manufacturing Capabilities
As a vertically integrated� titanium bar factory, we control the full production process from raw material melting to finished bar inspection, ensuring consistent mechanical performance and material traceability.
Manufacturing scope includes:
Titanium bar and titanium rod manufacturing
Hot rolled, forged, and cold-finished bars
Straightened, ground, or peeled surface conditions
Cut-to-length supply based on drawing requirements
Typical size range:
Diameter: customized upon request
Length: fixed or random length available
Available Titanium Grades & Standards
We manufacture titanium bars and rods in commonly specified industrial and medical grades, supporting both standard and custom requirements.
Material Grades
Ti-6Al-4V (Grade 5)
Ti-6Al-4V ELI (Grade 23)
Applicable Standards
ASTM B348 - Titanium Bars and Billets
ASTM F136 - Medical Grade Ti-6Al-4V ELI
ISO and equivalent international standards upon request
Material selection support is available for applications requiring corrosion resistance, fatigue strength, or biocompatibility.
Application-Driven Titanium Bar Solutions
Our titanium bars and rods are widely used in demanding environments where strength-to-weight ratio, corrosion resistance, and material reliability are critical.
Typical application areas include:
Medical implants:� orthopedic fixation systems, spinal rods, surgical instruments
Aerospace components:� structural parts, fastener blanks, support shafts
Chemical processing equipment:� heat exchanger rods, corrosion-resistant shafts
Marine engineering:� components exposed to seawater environments
Industrial machinery:� high-load, lightweight precision parts
Each application sector may require different grades, tolerances, and surface conditions, which are supported through our manufacturing process.
Quality Control & Material Traceability
As a responsible� titanium rod manufacturer, quality control and traceability are integrated into every production stage.
Quality assurance includes:
Chemical composition analysis
Mechanical property testing (tensile, yield, elongation)
Dimensional inspection
Surface condition verification
Heat number traceability
Mill test certificates (EN 10204 3.1) and inspection reports are available to support procurement and regulatory documentation.

OD25 Tc titanium bar is mainly used in mask machine ,and has a crazy sales in both home and abroad.

Titanium block and titanium alloy block have excellent properties, shrinkage cavity and shrinkage porosity, large dendrites, specific internal texture structure, uniform segregation and inclusion distribution, chemical machinery, environmental protection equipment, food equipment, papermaking can be used for forging stability Performance, salt production, alkali production, pump valves, marine equipment, mobile phone cases, chemical wastewater treatment.

Titanium sheet are commonly used in manufacturing, and the most popular grade 2 and grade 5.Industrial pure titanium and titanium alloy have high corrosion resistance and specific strength. They are widely used in electric power, chemical,aerospace parts and other fields.

Titanium alloy has the characteristics of light weight, high strength and good corrosion resistance, so titanium alloy flange is often used in oil drilling, marine engineering, machinery and equipment manufacturing industry in the key pressure parts of the connection.

Titanium wire
Grade: Gr1, Gr2, Gr3, Gr4, Gr6, Gr7, Gr12, TA28, TC1, TC2, TC3

Diameter: 0.1-7.0

Supply status: heat processing, cold processing, annealed

Application: medical industry

Titanium ring Size: OD:200-400mm, ID:100-300mm, Height20-120mm, WTK40-150mm OD:400-700mm, ID:150-500mm, Height35-600mm, WTK40-250mm OD:700-1100mm, ID:300-900mm, Height45-600mm, WTK40-600mm Grade: Gr1, Gr2, Gr3, Gr4, Gr5(6AL-4V), Gr9, Gr12, Gr23(Gr5ELI) Standard: ASTM B381
Application: chemical industry

Titanium tube plate is mainly used in chemical industry.

Specification: titanium disc
Grade: Gr1, Gr2, Gr3, Gr4, Gr5(6AL-4V), Gr9, Gr12, Gr23(Gr5ELI)

Standard: ASTM B381

Size: OD6-13mm, Max length 4m
OD13-120mm, Max length 15mm

Application :medical, aerospace, chemical industry etc.

Product Introduction
We are professional titanium manufacturer located in Baoji China Titanium Valley, supplying Grade 2 pure titanium bar and Grade5 Ti6Al4V TC4 titanium alloy bar, strictly produced under ASTM B348 standard.
Specifications
1. Material Grade: Gr1,Gr2,Gr3,Gr5(TC4)
2. Diameter range: 6mm~200mm
3. Standard length: 1000mm/3000mm, custom cutting available
4. Surface: Pickled, Polished, Matte
Advantages
1. Stable monthly production capacity over 50 tons, support long-term monthly bulk orders
2. Complete original MTC material test certificate for customs clearance
3. Wide application: engineering machinery, chemical industry, medical equipment, aerospace
4. Full export qualification, provide complete export documents
Service
Fast production lead time, small sample support, flexible packaging for sea transportation. Welcome global buyers to contact us for latest stock and competitive factory price.

Product Introduction
We are professional titanium manufacturer located in Baoji China Titanium Valley, supplying Grade 2 pure titanium bar and Grade5 Ti6Al4V TC4 titanium alloy bar, strictly produced under ASTM B348 standard.
Specifications
1. Material Grade: Gr1,Gr2,Gr3,Gr5(TC4)
2. Diameter range: 6mm~200mm
3. Standard length: 1000mm/3000mm, custom cutting available
4. Surface: Pickled, Polished, Matte
Advantages
1. Stable monthly production capacity over 50 tons, support long-term monthly bulk orders
2. Complete original MTC material test certificate for customs clearance
3. Wide application: engineering machinery, chemical industry, medical equipment, aerospace
4. Full export qualification, provide complete export documents
Service
Fast production lead time, small sample support, flexible packaging for sea transportation. Welcome global buyers to contact us for latest stock and competitive factory price.

Product Name: Titanium Bar

Material:
GR.1~GR.4
GR.5 (Ti-6Al-4V)
GR.7 (Ti- 0.12~0.25Pd)
GR. 9(Ti-3Al-2.5V)
GR.23 ( Ti-6Al-4V ELI)
GR.29 (Ti-6Al-4VELI-0.08-0.14Ru)
GR.36 (Ti-45Nb) Ti-3.5Al-10Mo-8V-1Fe
Ti-15V-3Al-3Cr-3Sn
Ti-32Mo
Ti-6Al-2Sn-4Zr-2Mo
Ti-6.5Al-3.5Mo-1.5Zr-0.3Si
Ti-3Al-5Mo-4.5V
Ti-6Al-7Nb
Ti-13Nb-13Zr
Ti-6Al-2Sn-4Zr-6Mo
Other brands can be customized

Details: EnergyTi-Professional titanium rod, titanium alloy rod, titanium square rod, titanium round rod, production suppliers, spot supply, complete standards, specifications.
Titanium alloy rod is mainly used in mechanical equipment, electroplating equipment, chemical equipment, petroleum coking zinc equipment, medical, various precision parts and other industries.

Size:
Rolling:�¦8mm~�¦39mm x L Length:300-6000mm
Forging:�¦30mm~�¦400mm x L

Production standard:
ASTM F67, ASTM F136, ASTM F1295, ASTM F1472, ASTM F1713, ASTM B348, ASTM B381, ISO 5832-2, ISO 5832-3

Production status and manufacturing process of titanium alloy rod:
Production state: hot processing state (R), cold processing state (Y), return state (M)
Manufacturing process: hot forging, hot rolling, cold rolling, annealing, pickling

Titanium alloy rod shape:
Titanium round bar, titanium square bar, titanium hexagon bar
Forging rod, rolling rod, drawing rod

Surface of titanium alloy rod:
Surface:Hot rolled black surface, Machined surface, polished surface (H11, H9, H8)

Packing:
Export wooden case packing or according to customer's request

Item name

Gr2 titanium bar


Standard

Astmb348, astmf67, atstmf136


Material

Gr2


Available materials

Gr1, gr2.Gr3, gr4, gr5(ti-6al-4v), gr5eli, ti-6al7nb(new material)


Specification(dia*length)

8x100mm(customized is ok)


Certificates

Iso9001:2000


Shape

Round bar, square /flat bar, hexagonal bar, rectangle bar


Technics

Hot or cold rolling or annealed


Application

Industrial, medical, aviation, military, salt-making,

Petrochemical, metallurgy, electronics , chemical, etc


Packaging

Standard export case



Plywood case

Medical, serospace, military, petrochemical, engineering, metallurgy, electroplating, vacuuming metalling, sports etc, in accordance with ams, astm, asme, mil, dms, din, jis.
Meeting the customer's requirements iso 9001:2008 registered.

Size:dia6~40mm, dia40~100mm, dia100~350mm.
Grade:gr1, gr2, gr3, gr4, gr5, gr7, gr9, gr12, gr23.
Standard:astm b348 , astm f136, astm f67, ams4928.



Dia3.0-20mmxl3000mm, h9-h7.
Dia6.0-200mmxl1000-6000mm

Medical, serospace, military, petrochemical, engineering, metallurgy, electroplating, vacuuming metalling, sports etc, in accordance with ams, astm, asme, mil, dms, din, jis.
Meeting the customer's requirements iso 9001:2008 registered.

Standard:astm b348 , astm f136, astm f67, ams4928.Iso5832-2, iso5832-3, iso5832-11.




Dia3.0-20mmxl3000mm, h9-h7.
Dia6.0-200mmxl1000-6000mm

From dia4.0 to dia300.0mm
Longth at 6000.0mm

As you need

Products: titanium bar
Property: anticorrosion, heat resistance, cold resistant, non-poisonous, non-magnetic.
Origin: Baoji, China
Material: TA2/TC4
Price: negotiable
Minimum order: 1kg.



Standard export wooden case.

Titanium bar.

Wooden box.

1. Material: RO4200-1, RO4210-2, RO4251, RO4261
2. Size: 4~100mm
3. Standard: As per ASTM B392-98
4. Purity: >=99.9% or 99.95% or niobium alloy
5. Export market: North America, South America, Eastern Europe, Southeast Asia, Africa, MID East, Western Europe
6. Export percentage: 51%-60%
7. Ports: Tianjin Shanghai
8. Payment: L/C T/T
9. Delivery time: 15-30days after you placng your order
10.Packaging: hardest wooden boxes or as your requirements.



Hardest wooden boxes or as your requirements.