Find Verified Lubricant Additives Suppliers, Manufacturers and Wholesalers

Lubricating properties of low sulfuric diesel fuel with K-Lube additive at device HFRR under method EN ISO 12156-1 (data of JSC “VNII NP” Russia):

At present production of highquality diesel fuels is impossible without attaching of additives of various functionality as depressor, cetane increasing, antismoke, washing, anti-oxidizing, dispersive, corrosion inhibitors, anti-wear and many oth. At preparation of multifunctional packets of additives their compatibility are to be considered, as the various surfaceactive substances are able to influence upon functional properties of each other. At usage of “K-Lube” anti-wear additive in packets with additives of other functionality (cetane increasing, depressor-dispersive and other) no contradiction between them emerges. Just the opposite, the “K-Lube” additive operated better than its foreign analogues /proved by following testing hold by JSC “VNII NP” Russia/:

Taking into consideration results of mentioned above the “K-Lube” additive possesses high protective effectiveness against weariness and we would to mention that usage of additive at enterprises and petroleum refineries enables to save financial assets. Besides high effectiveness of “K-Lube” additive regarding protection from fuel pumps differing from foreign analogues the product has low pour point without adding any dissolvents (no more than 45 degrees below zero), what facilitates transportation, storage and usage it in cold climatic conditions.

Characteristics
Density at 15C kgm3 1075
Boiling temperature C 190
Pour Point 50 diluted 40
pH 86

Packaging
1 L plastic container 12 units case
5 L plastic container 4 units case
200 L drum

TECHNOL 4 SEASONS ANTIFREEZE COOLANT BLUE G11 is Monoethylene Glycolbased antifreeze coolant of blue color that can be used throughout the year It has been diluted with demineralized water in a 5050 ratio and is intended for use in cooling systems of both gasoline and diesel engines It ensures maximum protection against winter freezeups 40 summer boilovers 110 rust and corrosion of all metal parts and ensures heat transfer It does not contain amines It must not be mixed with different colors or types of antifreeze coolant

Meets the requirements of:
VW 502.00/505.00
MB 229.5/226.5
PORSCHE A40
RN 0700/0710
PSA B71 2296


Specifications:
API SN/CF
ACEA A3/B4

Packaging:
1 L Plastic 12 units / case
4 L Plastic 4 units / case
5 L Plastic 4 units / case
208 L Drum -

Meets the requirements of:
Dexron III H
Ford Mercon
MB 236.20
Ford ESP M2C 166-H
Ford ESP M2C 138-CJ
CAT TO-2
Allison C4

Packaging:
1 L metal container 12 units / case
4 L metal container 4 units / case
20 L plastic container 1 unit / case

TECHNOL ATF III H is a high quality automatic transmission fluid formulated for automatic, semi-automatic transmissions, and torque converters of passenger, light commercial and industrial vehicles that require GM DEXRON III H or Mercon. This fluid can also be used for hydrostatic transmissions, power steering and hydraulic systems. Having a high viscosity index, this fluid provides excellent resistance to corrosion and foam formation. It also has outstanding thermal stability, antioxidant, antirust, antiwear properties and offers high-level protection under all conditions. Its excellent friction properties meeting the requirements of GENERAL MOTORS Hydramatic ensure smooth gear shifting.
208 L drum -

Meets the requirements of:
Cummins CES 20081
MB 228.31/228.51
MAN M3677/3477/3575/3271-1
Volvo VDS-4
RVI RLD-3/RLD-2
JASO DH-2
MACK EO-N Premium Plus
MACK EO-O Premium Plus
CAT ECF-3
Detroit Diesel 93K218
MTU Oil Category 3.1/2.1
Deutz DQC-IV-10 LA
Scania LA
Scania LDF-4
Voith Class B / MB 235.28

Specifications:
API CJ-4
ACEA 2016 E4/E6/E7/E9

TECHNOL POWER LD 10W-40 is a synthetic technology engine oil that has been formulated to satisfy the most stringent requirements of on-road trucks with heavy duty diesel engines. It is also suitable for use in most gasoline engines. This engine oil protects diesel engines equipped with post-treatment systems, such as diesel particulate filters (DPF), thanks to its specific Low SAPS technology (low content in Sulphated Ash, Phosphorus, and Sulphur). This engine oil provides outstanding resistance to oxidation and corrosion, contains detergents and dispersants that keep the engine clean and possesses antirust, and antiwear properties. Its high viscosity index and thermal stability ensure proper lubrication of moving components of the engine under most severe operating conditions. With its extended drain intervals, use of this engine oil helps reduce maintenance costs. It is recommended for use in Euro 4 and Euro 5 engines of most manufacturers.

Characteristics
Density at 15C kgm3 1075
Boiling temperature C 190
Pour Point 50 diluted 40
pH 86


Packaging
1 L plastic container 12 units case
5 L plastic container 4 units case
200 L drum

TECHNOL 4 SEASONS ANTIFREEZE COOLANT RED G12 is Monoethylene Glycolbased antifreeze coolant of red color that can be used throughout the year It has been diluted with demineralized water in a 5050 ratio and is intended for use in cooling systems of both gasoline and diesel engines of modern vehicles It ensures maximum protection against winter freezeups 40 summer boilovers 110 rust and corrosion of all metal parts prevents foam formation and ensures heat transfer It does not contain amines nitrites or phosphates It must not be mixed with different colors or types of antifreeze coolant

Characteristics
Density at 15C kgm3 1075
Boiling temperature C 190
Pour Point 50 diluted 40
pH 86


Packaging
1 L plastic container 12 units case
5 L plastic container 4 units case
200 L drum

TECHNOL 4 SEASONS ANTIFREEZE COOLANT GREEN G11 is Monoethylene Glycolbased antifreeze coolant of green color that can be used throughout the year It has been diluted with demineralized water in a 5050 ratio and is intended for use in cooling systems of both gasoline and diesel engines It ensures maximum protection against winter freezeups 40 summer boilovers 110 rust and corrosion of all metal parts and ensures heat transfer It does not contain amines It must not be mixed with different colors or types of antifreeze coolant

Approvals:
MB-Approval 229.51

Meets the requirements of:
BMW LL-04
GM DEXOS 2
RN0700/0710
MB 229.51/31/226.5


Specifications:
API SN/CF
ACEA C2/C3

TECHNOL PLATINUM 5W-30 is a new generation of Low SAPS (low content in Sulphated Ash, Phosphorus, and Sulphur) engine oil specifically formulated to meet the technical requirements of gasoline and diesel engines of new vehicle models. Its Low SAPS technology makes it the lubricant of choice for optimal operation of engines of the latest generation, equipped with anti-pollutant devices. This engine oil ensures the optimal functioning of three-way catalytic converters and particulate filters and compliance with performance levels declared by vehicle manufacturers, and Euro V environmental standards. Its excellent resistance to temperature variations guarantees the longevity of engine parts and optimal performance under all circumstances.

High-purity Copper Powders, Copper Ingots & Rare Earth Metals

SIS Advanced Metals offers high-purity and ultra-high-purity materials for industrial, additive manufacturing, electronics, aerospace, research and advanced technology applications.

Our product portfolio includes:

Ultra-High-Purity Copper Powders

Purity: up to 99.9999%
Available particle sizes:
0.5-2.0 m
5-10 m
15-30 m
40-60m
65-100m

Production method: vacuum evaporation and condensation
Stabilised in an argon atmosphere
Packaging options: 0.25 kg glass ampoules, 2 kg PET containers and industrial packaging

High-Purity Copper Ingots

Purity: up to 99.9999%
Suitable for electronics, semiconductor, aerospace, research and specialised metallurgical applications
Custom quantities and packaging available upon request

Rare Earth Elements & Specialty Metals

High-purity rare earth metals, oxides, alloys and specialty materials are available subject to the required element, purity, form and volume.

Available documentation may include:

Certificate of Analysis
Technical Data Sheet
Safety Data Sheet
Origin documentation
Independent SGS or equivalent inspection upon agreement

We welcome inquiries from qualified industrial buyers, research institutions, additive manufacturing companies, electronics manufacturers and international distributors.

For a commercial quotation, please specify:

Product and required purity
Particle size or ingot dimensions
Required quantity
Delivery destination
Preferred Incoterms
Payment terms

SIS Advanced Metals
Advanced Materials for High-Technology Industries

#CopperPowder #HighPurityMetals #RareEarthElements #AdvancedMaterials #AdditiveManufacturing #CopperIngots #SpecialtyMetals

Meets the requirements of:
GM DEXOS1 GEN2


Specifications:
API SN
ILSAC GF-5

TECHNOL HYBRID 5W-30 is a fully synthetic engine oil specifically formulated for use in hybrid vehicles. This engine oil delivers outstanding fuel economy and performance under most demanding operating conditions, thanks to its high quality base oils and additives. It possesses anticorrosion, antioxidant, and antifoaming properties and contains detergents and dispersants that keep the engine clean and preserve its power. Its very stable viscosity index ensures excellent lubrication of the moving components of the engine and protects it against wear and tear at low and high temperatures all year round.

Increase of ecological requirements to emissions of car engines and toughening of operation terms of modern combustion engines require usage of various additives to petrols in larger scales.
Restrictions on sulfur content until 0,001 and 0,005% were set forth in Sweden for the 1st time in 1991, and until present they are the strictest one. In 1993 the restriction of sulfur in fuel till 0,05 was applied in USA, in 1994 – in Canada, in 1997 – in Japan. Since 2000 diesel fuel with sulfur content no more than 0,035% is applied. Supposedly, since 2005 sulfur content in fuel wont exceed 0,005%. Along with decrease of harmful emission in exit gases, application of ecologically pure diesel fuels entailed a number of problems: breakdown of fuel pumps, due to decrease of lubricating ability of diesel fuels and .increase of corrosion activity, related with removal of surfaceactive substances able to form protective film. In 2005-2010 stiffer norms on sulfur content are proposed: up to 10 ppm and polycyclic aromatic carbohydrates up to 2%. Starting from 2000, the indicator of lubricating properties of diesel fuels under ISO 12156-1 at HFRR device is included in European standard regarding the diesel fuel EN 590, basing on it the norm is set forth: diameter of wear scar is no more 460 mkm.

Requirements to quality of diesel fuels under EN 590

Purpose:
According to GOST 24211-91 ?«Additives for concrete?» softener is applied to regulation plasticity of concrete and concern I groups of a class.
Action:
Plasticity mark P1 up to P5 increases sdditives of softener. After 28 days of drying hardness raises on 30-60% and norms of charge of cement on 1 m3 is reduced on 60-100 kg thus it intended for improvement of otheres building ??“ technical qualities of concrete.
Quality parameters are resulted below:
Color – colorless
Density – 1,16 gr/m3
pH – 8-9

In the additive there is no chlorine.Norms of the charge calculated on the dry rest weight of cement of 0,4-1,0%.

Guarantee:

Guarantee for 6 month. Packaging on metal and plastic drums, transported in 250 kg metal containers.

Specifications:
API CF

Packaging:
1 L metal container 12 units / case
4 L metal container 4 units / case
5 L metal container 4 units / case
7 L metal container 3 units / case
208 L drum -

TECHNOL TURBODIESEL 15W-40 has been formulated to fulfill the requirements of turbocharged and naturally aspirated diesel engines of light industrial vehicles, equipped with or without catalysts, operating under normal conditions. This engine oil possesses thermal stability, detergent and antiwear properties, provides resistance to oxidation and corrosion, and ensures immediate lubrication of engine components at cold starts. It is suitable for use under all operating conditions in all seasons.

Specifications:
API SJ/CF
Packaging:
1 L plastic container 12 units / case
4 L plastic container 4 units / case
5 L plastic container 4 units / case
208 L drum -

TECHNOL SILVER 15W-40 has been developed to fulfill the most stringent requirements of both gasoline and diesel engines of passenger and light commercial vehicles. This engine oil is perfectly adapted to vehicles equipped with catalysts and using unleaded fuel. Thanks to its antioxidant, antirust, antifoaming, antiwear and anticorrosion properties, this engine oil provides resistance to oxidation and ensures good engine cleanliness. It has viscosity stability and can be used under all operating conditions in all seasons.

Specifications:
API SG/CD
Packaging:
1 L metal container 12 units / case
4 L metal container 4 units / case
5 L metal container 4 units / case
20 L plastic container 1 unit / case
208 L drum

TECHNOL EXTRA 20W-50 has been formulated for both gasoline and diesel engines of passenger cars and light commercial vehicles of previous generation. This engine oil is perfectly adapted to vehicles equipped with catalysts and using unleaded fuel. It has thermal stability, antioxidant, antiwear and anticorrosion properties, contains detergent and dispersants that keep the engine clean and preserve its power.

Packaging:
0.9 kg plastic container 12
4 kg plastic container 1
15 kg plastic container 1
175 kg drum -

TECHNOL LITOL-24 is a multipurpose lithium grease formulated with high quality mineral base oils and a lithium soap thickener. It is suitable for use in plain and rolling bearings, sliding surfaces, friction units of wheeled and tracked vehicles, industrial, agricultural, and construction equipment and marine machinery for various purposes under extreme operating conditions. This grease possesses high viscosity and exhibits outstanding resistance to oxidation, wear, corrosion, and rust. It has been formulated to provide excellent protection against high temperatures, extreme pressure, and shock loads. It is recommended for use in the temperature range from -40 C to 120 C.

Packaging:
0.9 kg plastic container 12
4 kg plastic container 1
15 kg plastic container 1
175 kg drum -

TECHNOL SOLIDOL is a water-resistant multipurpose calcium grease made of high quality mineral base oils and a calcium soap thickener. This grease is used in a wide range of applications, including lubrication of chassis, rolling and sliding friction units of various machines, and mechanisms operating under medium load and speed conditions. Thanks to its antioxidant, anticorrosion and antirust properties, this grease ensures protection against oxidation, corrosion and rust, extending the service life of the lubricated components. It provides excellent water resistance and possesses high mechanical stability. It is recommended for use in the temperature range from -25 C to 65 C.

Meets the requirements of:
MB 228.1
MAN 3275
Volvo VDS-3
Deutz DQC III
CAT ECF-1a
Cummins CES 20077
Mack EO-N
MTU 2.0
Renault RLD-2
JASO DH-1

Specifications:
API CH-4/SJ
ACEA E7-2016

Packaging:
7 L plastic container 3 unit / case
20 L plastic container 1 unit / case
208 L drum -

TECHNOL POWER 15W-40 is an engine oil formulated through the use of high quality base oils and additives to fulfill the requirements of trucks with heavy-duty engines used for long distances. Its high viscosity index and thermal stability enable proper lubrication of moving components of the engine under most severe operating conditions. Thanks to its outstanding dispersant and antiwear properties, this engine oil ensures good engine cleanliness and provides protection for the moving components of the engine. It is recommended for use in Euro 3 and the previous generation of engines of most American and European manufacturers.

Specifications:
API GL-5

Packaging:
1 L metal container 12 units / case
4 L metal container 4 units / case
20 L plastic container 1 unit / case
208 L drum -

TECHNOL GEAR OIL 80W-90 GL-5 is an extreme pressure gear oil produced using selected high quality mineral base oils to fulfill stringent requirements of manual gearboxes, transfer boxes, rear axles, and differentials of passenger, commercial and industrial vehicles which require API GL-5. Its high viscosity index ensures excellent lubrication of moving gear components and improves gear shifts at very low and very high temperatures and its high thermal stability provides protection against deposit formation. This fluid has excellent antioxidant, antiwear, antifoaming, anticorrosion, antirust and load carrying properties.

Meets the requirements of:
MB 228.1
MAN 3275
Volvo VDS-3
Deutz DQC III
CAT ECF-1a
Cummins CES 20077
Mack EO-N
MTU 2.0
Renault RLD-2
JASO DH-1

Specifications:
API CH-4/SJ
ACEA E7-2016

TECHNOL POWER 15W-40 is an engine oil formulated through the use of high quality base oils and additives to fulfill the requirements of trucks with heavy-duty engines used for long distances. Its high viscosity index and thermal stability enable proper lubrication of moving components of the engine under most severe operating conditions. Thanks to its outstanding dispersant and antiwear properties, this engine oil ensures good engine cleanliness and provides protection for the moving components of the engine. It is recommended for use in Euro 3 and the previous generation of engines of most American and European manufacturers.