Find Verified Cow Dung Based Products Suppliers, Manufacturers and Wholesalers

Meets the requirements of:
GM DEXOS1 GEN2


Specifications:
API SN
ILSAC GF-5

TECHNOL HYBRID 5W-30 is a fully synthetic engine oil specifically formulated for use in hybrid vehicles. This engine oil delivers outstanding fuel economy and performance under most demanding operating conditions, thanks to its high quality base oils and additives. It possesses anticorrosion, antioxidant, and antifoaming properties and contains detergents and dispersants that keep the engine clean and preserve its power. Its very stable viscosity index ensures excellent lubrication of the moving components of the engine and protects it against wear and tear at low and high temperatures all year round.

Packaging:
0.9 kg plastic container 12
4 kg plastic container 1
15 kg plastic container 1
175 kg drum -

TECHNOL LITOL-24 is a multipurpose lithium grease formulated with high quality mineral base oils and a lithium soap thickener. It is suitable for use in plain and rolling bearings, sliding surfaces, friction units of wheeled and tracked vehicles, industrial, agricultural, and construction equipment and marine machinery for various purposes under extreme operating conditions. This grease possesses high viscosity and exhibits outstanding resistance to oxidation, wear, corrosion, and rust. It has been formulated to provide excellent protection against high temperatures, extreme pressure, and shock loads. It is recommended for use in the temperature range from -40 C to 120 C.

Packaging:
0.9 kg plastic container 12
4 kg plastic container 1
15 kg plastic container 1
175 kg drum -

TECHNOL SOLIDOL is a water-resistant multipurpose calcium grease made of high quality mineral base oils and a calcium soap thickener. This grease is used in a wide range of applications, including lubrication of chassis, rolling and sliding friction units of various machines, and mechanisms operating under medium load and speed conditions. Thanks to its antioxidant, anticorrosion and antirust properties, this grease ensures protection against oxidation, corrosion and rust, extending the service life of the lubricated components. It provides excellent water resistance and possesses high mechanical stability. It is recommended for use in the temperature range from -25 C to 65 C.

Meets the requirements of:
MB 228.1
MAN 3275
Volvo VDS-3
Deutz DQC III
CAT ECF-1a
Cummins CES 20077
Mack EO-N
MTU 2.0
Renault RLD-2
JASO DH-1

Specifications:
API CH-4/SJ
ACEA E7-2016

Packaging:
7 L plastic container 3 unit / case
20 L plastic container 1 unit / case
208 L drum -

TECHNOL POWER 15W-40 is an engine oil formulated through the use of high quality base oils and additives to fulfill the requirements of trucks with heavy-duty engines used for long distances. Its high viscosity index and thermal stability enable proper lubrication of moving components of the engine under most severe operating conditions. Thanks to its outstanding dispersant and antiwear properties, this engine oil ensures good engine cleanliness and provides protection for the moving components of the engine. It is recommended for use in Euro 3 and the previous generation of engines of most American and European manufacturers.

Specifications:
API GL-5

Packaging:
1 L metal container 12 units / case
4 L metal container 4 units / case
20 L plastic container 1 unit / case
208 L drum -

TECHNOL GEAR OIL 80W-90 GL-5 is an extreme pressure gear oil produced using selected high quality mineral base oils to fulfill stringent requirements of manual gearboxes, transfer boxes, rear axles, and differentials of passenger, commercial and industrial vehicles which require API GL-5. Its high viscosity index ensures excellent lubrication of moving gear components and improves gear shifts at very low and very high temperatures and its high thermal stability provides protection against deposit formation. This fluid has excellent antioxidant, antiwear, antifoaming, anticorrosion, antirust and load carrying properties.

Meets the requirements of:
MB 228.1
MAN 3275
Volvo VDS-3
Deutz DQC III
CAT ECF-1a
Cummins CES 20077
Mack EO-N
MTU 2.0
Renault RLD-2
JASO DH-1

Specifications:
API CH-4/SJ
ACEA E7-2016

TECHNOL POWER 15W-40 is an engine oil formulated through the use of high quality base oils and additives to fulfill the requirements of trucks with heavy-duty engines used for long distances. Its high viscosity index and thermal stability enable proper lubrication of moving components of the engine under most severe operating conditions. Thanks to its outstanding dispersant and antiwear properties, this engine oil ensures good engine cleanliness and provides protection for the moving components of the engine. It is recommended for use in Euro 3 and the previous generation of engines of most American and European manufacturers.

Meets the requirements:
MB 229.1/229.3
VW 502.00/505.00
PSA B71 2300
RN 0700/0710


Specifications:
API SN/CF
ACEA A3/B4

Packaging:
1 L plastic 12 units / case
4 L plastic 4 units / case
5 L plastic 4 units / case
208 L drum -

TECHNOL GOLD 10W-40 is a synthetic technology engine oil that has been developed to cover the most stringent requirements of engines of both gasoline and diesel passenger vehicles. Satisfying rigorous standards by vehicle manufacturers, this engine oil provides resistance to oxidation with its high quality base oils and additives, ensures good engine cleanliness, reducing particle accumulation through efficient dispersant power, and long-term wear protection of parts, increasing engine life.

High-quality base oils I and II from major Ports of loading: the SN-150
SN-350
SN-400
SN-500
SN-650
BS
BS-150
BG-1200N
E.t.c

It has been decades that architectural glass sheets have been utilized as a construction material. Over this time, manufacturers have achieved a significant success in terms of fabrication and finishing technology, bringing the glass properties almost to perfection. Increasingly pronounced in glass industry is the nanotechnology sector, which renders it specific and extraordinary properties in terms of operation and aesthetics, thus opening new bright perspectives for architects and designers.

It would be fair to say that it was new safe multilayer glass items that helped discover most significant improvements of properties and capabilities of glass as a construction material. All valuable operation and technical properties of such glass are achieved by using a “sandwich” principle, i.e. by creating a multilayer composite structure with a polymer layer in between. It is still difficult to appreciate the whole significance and implications of this development.

Regrettably, many issues of perfecting the technology and equipment that helps create multilayer glass (triplex production equipment) have been outside researchers’ focus of attention, thus hindering the practical development across the entire range of safety glass application. Most new properties are still unknown and require serious theoretical and experimental developments to uncover. Among these: detailed study of formation and development of multilayer glass production technology based on innovative polymer materials with a higher strength compared to existing materials, research of properties and application of hybrid structures based on new composite elements.

The combination of fragile glass and plastic materials (for instance: polycarbonate and glass sandwich panels, glass and acryl tile etc.) enables to optimize the functionality of multi-layer shutterproof glass. It is beyond doubt that ongoing researches in this area will boost the improvement of existing and development of new approaches to designing and creating multilayer glass machines for industrial-scale production.

It often happens that people confuse glass panes and vinyl windows. These are not synonyms, however. A glass pane is a part and nearly crucial part of a window structure. This is a translucent structure consisting of two or more glasses that are fixed (glued) together along the outline using spacing bars and sealant compounds.
Main functions of a glass pane: natural lighting, thermal and noise insulation.

Glass panes are categorized by manufacturing process:

standard, where molecular sieve is poured into a metal or vinyl spacer, after which the glued glass sheets are plastered along the edge with silicon, isomelt, polysulfide or polyurethane sealant compound, thus providing the secondary sealing.
Warm edge technology-based manufacture This is a new and promising technology. It differs from the standard technology in that instead of several production steps as in the case with glass pane it involves only two (flexible spacer application, pressing), thus greatly saving time and cost. Such glass pane is warmer than that manufactured using a standard technology.
As defined in GOST 24866, glass pane are categorized as follows:

by number of chambers. A space between each two glass sheets is called a chamber. Glass panes can be single-chamber (two glass sheets), double-chamber (three glass sheets) and so on.
by width The glass pane width is the full width considering its glass and air part. Glass panes can be 14, 16, 18, 20, 22, 24, 28, 32, 36, 40, 42, 44 etc. mm
By glass type:
regular
energy-efficient glass with low-emission coating (hard or soft, also known as - or I-type)
noise-resistant triplex
sun-screening tinted or film-coated glass
shutterproof glass with a high protection class.

Is alkyd varnish based enamel and provides durable coating, possesses excellent features. It is used for internal and external application. It is prepared as gloss and matt enamels, and flooring enamel.
Solvent: White spirit. Expenditure: 130-150g per 1m2.
Drying time: 24 hours at 18-220C

Acryl emulsion based and used for binding upper substrata layers (plastering, concrete, brick), ensuring adhesion to subsequent paint layer. It contains antimicrobial component slowing down growth of bacteria and mould. Solvent:
Water. Expenditure: 1kg per 30-40m2 in single layer. Drying time: 2 hours at 200C

High quality alkyd based ready-to-use priming used for coating of surfaces with further enamelling. It is used to ensure firm and reliable connection of painted surface and lacquer materials. It is effective anticorrosion protection. It is produced in white, grey, red-brown colours.
Solvent: Xylain.
Expenditure: 100-150 per 1m2 in single layer.
Drying time: 24 hours at 200C