Find Verified Automobile Filters Suppliers, Manufacturers and Wholesalers

Type: Coil Spring
Spring Material: Steel
Applicated Vehicle: Man
OEM Number: 81417226061
Warranty: 1 Years
MOQ: 100PCS
HS Code:8708809000
Application: Auto Suspension Parts
Normal Payment Terms: 30% T/T in advance and balance before shipment





Packed by cartons and can be customized by clients' requirement

i.About The Product This device is designed based on the Toyota lexus LS400 front axle assembly to holistically demonstrate structures and operation of the EPS system and front axle suspension system. The device applies to theoretical teaching and maintenance training of the EPS system in secondary and senior vocational skill schools, normal education and training institutions. ii. Features 1.A real and operable EPS system is used to illustrate the structure of the system. 2.A three-phase motor drives a booster pump to operate the steering wheel and adjust the speed signal imitation knob. In this way, the device demonstrates electric power steering. 3.The training bench is made of advanced aluminum-plastic plate with characteristics of not less than 4mm thick, corrosion resistance, impact resistance, pollution resistance, fireproof, and moistureproof. Its surface are processed by special craft and spraying primer. Never fade color circuit diagram and working principal diagram are painted on the board whose surface coating with varnish. The trainees can learn and analyze the working principle of the control system by referencing the diagram and the real object. 4.The training bench is installed with detection terminals to detect electric signals, for example, resistance, voltage, current, and frequency, of circuit components of the EPS. 5.The training bench's base frame is made in steel and the surface is paint-coated. Self-retention wheels are installed to ensure that the bench is flexible, reliable and endurable. 6. Equipped with intelligent fault setting and appraisal system, include fault setting, troubleshooting and assessment functions etc. iii. Basic Parameter 1.Size: 1700mm × 1200mm × 1800mm (length x width x height) 2.Driving power supply: three-phase four-wire (three-phase five-wire 380±10% V 50 Hz) 3.Input power: A.C. 220V ± 10% 50 Hz 4.Operating power supply: 12V DC 5.Operating temperature: -40? to +50? 6.Oil pressure gauge: 0 – 100 kg/psi 7.Three-phase asynchronous motor:

i.About The Product This device is designed based on the Volkswagen Jetta front axle assembly to holistically demonstrate structures and operation of the power steering system and front axle suspension system. The device applies to theoretical teaching and maintenance training of the power steering and front axle suspension systems in secondary and senior vocational skill schools, normal education and training institutions. The device can be used for structure display, operation simulation, and assembly and disassembly training. ii.Features 1.Real and operable power steering and independent suspension systems are used to illustrate structures of these two systems. 2.A three-phase motor drives a booster pump to operate the steering wheel. In this way, the device demonstrates power steering. 3.The training bench is installed with a pressure meter that displays real-time oil pressure changes of the booster pump. 4.The training bench's base frame is made in steel and the surface is paint-coated. Self-retention wheels are installed to ensure that the bench is flexible, reliable and endurable. iii. Basic Parameter 1.Size: 1700mm × 900mm × 1100mm (length x width x height) 2.Driving power supply: three-phase four-wire (three-phase five-wire 380 ± 10% V 50 Hz) 3.Operating temperature: -40? to +50? 4.Oil pressure gauge: 0–100 kg/psi 5.Three-phase asynchronous motor: ? Model: YT 90S-4 ? Voltage: A.C. 220V/380V ? Power: 1.5 KW ? Rotation speed: 1400 r/min

SIZE:12.00R20 SECTION WIDTH ( MM):309 FLAT OVERALL GIRTH (MM) :2909 WEIGHT( g ):4050 VALVE (GB):Z1-01-8 VALVE(TRA):TR179A




carton box or woven bag

Superior driving and braking performance, excellent resistance to wear and tear; good load capacity. Suitable for highways and general-class roads.



We can negotiate with each other

Receiver Drier
OE Standard, effectively controls moisture through desiccant.



25 pcs

Yzh code: bm001
Oem:1723528
Dpi:1295
Core size:440*438*32
Transmission: automatic
Package:carton
Warranty: 1year
Delivery time:30days





76*14*46cm

Features and Benefits:

Working principle- The flow through the nozzle creats a vacuum at the valve seat. Air is drawn in through the sensing port at the tip of the spout, through the safety cut out, past the diaphragm,and into the fuel. The valve will remain open while the air flows freely. When the fuel reaches the sensing port, suction builds up rapidly until it lifts the diaphragm and trips the automatic action which shuts the valve.The mechanic also trips if the ball of the safety cut off rolls back to obstruct the free air flow.It will also occur if the spout is pointed upwards or if the nozzle is dropped onto the ground. The valve opens with the flow, allowing smooth low control for"to-the penny" dispensing. It closes against the flow for a soft shock-less closure.
All type of guards are available if requested.
All type of guards with block magnet are available if requested.
"ZVA" logo or blank are available.
100% Factory tested.

Material
Body Aluminum
Spout Aluminum
Swivel Aluminum
Seals Buna-N, Viton
Covers PVC

Technical Specifical
Working Pressure 0.2 Mpa
Flow Rate 15 - 45 L/m
Auto Shut-off sensibility 0.1 second
Spout Internal Diameter 16mm
Intel Thread M34 ¡¨¢ 1.5
Net Weight 1.1 KG

Order Specifications
Item No. Swivel Inlet Size
ZVA DN1901 without swivel M34 ¡¨¢ 1.5
ZVA DN1902 with swivel Female, BSP, 3/4"
ZVA DN1903 with swivel Female, NPT, 3/4"
ZVA DN1904 with swivel Male, BSP, 3/4"
ZVA DN1905 with swivel Male, NPT, 3/4"
ZVA DN1906 with swivel Female, BSP, 1"
ZVA DN1907 with swivel Female, NPT, 1"
ZVA DN1908 with swivel Male, BSP, 1"
ZVA DN1909 with swivel Male, NPT, 1"

Color Options
Red, Green, Blue, Yellow, Orange, Black


Each Fuel Nozzle with Plastic Bag, Then with Box

Features and Benefits:
Even, Smooth spray pattern - Minimizes diesel foaming and false shut-off
Extra long anchor spring - Keeps the nozzle secure in most large fill opening.
Help reduces spills - A unique two-stage lever design assures a positive shut-off, even if held wide open.
Three Position hold-open device - One finger control of hold-open mechanism means easy setting of flow rate.
Easily replaced spouts -Simply remove three screws, Replacement kits are readily available from TDW.
Dash-pot Action - For smoother closing action and reduced line shock.
Dual Poppet - Easy to open nozzle against high pressure.
Available with flow lock - Designed to shut off automatically when the spout is tipped ip, limiting spillage.
Suitable for diesel, kerosene, gasoline and gasoline with ethanol blends.
100% Factory Tested.
TDW-7H UL LISTED.

Material
Body Aluminum
Lever and lever guard Duratuff
Main stem Extra hard stainless steel
Seals Buna-N, Viton

Technical Specifical
Working Pressure 0.2 Mpa
Auto Shut-off sensibility 0.1 second
Inlet Size 1"
Thread NPT/BSPT
Spout Outlet Diameter 30 mm, 28.7 mm
Flow Rate 20 - 120 L/m
Net Weight 1.55 KG

Color Options
Red, Green, Blue, Yellow, Black

Order Specifications
Item No. Inlet Thread Spout O.D.
TDW-7H01 1" NPT 28.7 mm
TDW-7H02 1" NPT 30 mm
TDW-7H03 1" BSPT 28.7 mm
TDW-7H04 1" BSPT 30 mm
TDW-7HB01 1" NPT 28.7 mm
TDW-7HB02 1" NPT 30 mm
TDW-7HB03 1" BSPT 28.7 mm
TDW-7HB04 1" BSPT 30 mm


Each Fuel Nozzle with Plastic Bag, Then with Box

Engine model¡êo 4m40
Oem no.: me202621
Amc#: 908515,
Car make: mitsubishi,
Application: delica box (p0_w, p1_w) 2.8 d
Pajero canter,
Year: 95/09 - 98/10, 1994 -,
Fuel type: diesel
Cylinder head design: sohc/ohc
Capacity tech.:2835cc/2.8d
Cylinder: 4,
Valve: 8

Carton sieze: 58*29*22cm

Price is for collection from the yard - which is located 80 miles from port of new jersey usa

3000mt per month x 12

1 tbr , otr , pcr tyre factory with over 20-year experience

2 iso , ccc , dot , ece , s-mark , eu-label , reach , gcc , sni , soncap

3 technical support from yokohama rubber company

4 production capacity: tbr (5, 800, 000 sets) / otr (200, 000 sets) / pcr (12, 000, 000 sets)

5.Truck tyre sizes: 385/65r22.5 / 315/80r22.5 / 315/70r22.5 / 295/80r22.5 / 295/75r22.5 / 285/70r19.5 / 235/75r17.5 / 13r22.5 / 11r24.5 / 11r24.5 / 1200r24 / 1200r20 / 1100r20 / 1000r20 / 825r16 / 750r16 etc

We have bias truck tyre and radial truck tires, like 1000-20 and 1000r20 and so on

1. Heavy load capacity/wear resistance/prick resistance
2.Specially designed rim ensures strong adhesiveness with tyre



Export sandard packing

Mixed highway and freeway for long distance and national transportation service, all position tubeless type for both city and highway applications.
Unique tread pattern design minimizes side sliding on wet road.
Optimized pattern groove design provides excellent stone ejection performance.

225/70r19.5
Tread depth(mm):13.8
Rim size:6.75
Speed symbol:m

185/60r14
Load/speed index:82h
Weight¡ê¡§kg¡ê©:7.39

185/60r14
Weight:7.39
Od:578

Td(mm):23
Rim:6.50h
Sw (mm):235
Od (mm):865
Speed index:b

8.25-16

Pneumatic wheelbarrow tire and handtruck tire

All sizes

.50-6, 13"x5.00-6, 13"x6.50-6
9)14inch: 14"x3.50-8, 14"x4.00-6, 14x4.10/3.50-5

10)15inch:15"x5.00-6, 15"x6.00-6
11)16inch:16"x4.00-8, 16"x4.50-8, 16"x6.50-8, 16"x4.80-8, 16"x7.50-8,
12)18inch:18"x8.50-8


11)16inch:16"x4.00-8, 16"x4.50-8, 16"x6.50-8, 16"x4.80-8, 16"x7.50-8,

Solid wheelbarr200x45 200x50 200x50 6x1.4 10x1.75, 7 8x1.75 8x2, 8x2.50-4 9x3.00-4 10x3.50-4 10x1.75, 10x2.5 10x2.75 10x2 12x2 13x3 14x3.5 400x70 400x100
Pu flat fr6.50-8e, 400-8, 13*3.00-8, 3.50-4co1, 3.50-4co2, 3.50-4co3, 3.50-4co8, 4.00-6a, 4.00-6d, 400-8f, 4.00-8g, 4.00-8i, 4.00-8v, 2.50-4b, 2.50-4f, 3.00-4, 4.00-6, 4.00-8, 3.50-8, 6.50-8

Is there middle man draining your profit.Get rid of them. It's information age




Packaging & deliverypackaging detail: in bulk, 20pcs/bag or according to your requirement
Delivery detail: within 30 days after received your deposit

All-position heavy duty rib tire suitable for on/off road applications.

3 deep groove, 4 rib design allows for excellent traction and drainage on all road surfaces.

Suitable for local trucks, tractors and trailers, as well as construction vehicles including mixers.

No packing or as customer request.
Outer diameter:1125mm
Section width:315mm
Weight:74-76kg

Mixed highway and freeway, all position heavy duty rib tyre for on/off highway application.
Special tread compound design for lower heat build-up, excellent puncture and cut resistance and minimized gasoline consumption.
Super steel belt carcass construction enhances casing strenth and maxmizes tyre load capacity.
Three ribs with horizontal lines on the shoulder optimize speed and traction performance.
Suitable to all the wheels of truck and tilting truck on highway or uneven road.

1.Tyre size :11.00r20



11r22.5
Weight:54-57kg

Reliable Quality Guarantee
Competitive Price
Fastest Delivery
Strict Market Protection
Strict Market Protection

reconsideration