Find Verified Door To Door Cargo Services Suppliers, Manufacturers and Wholesalers

Jet A-1 is a premium-grade aviation turbine fuel (ATF) designed for use in commercial jet aircraft, cargo aircraft, military aviation (where applicable), and turbine-powered helicopters.

It is a kerosene-type fuel manufactured to stringent international aviation standards and contains additives for anti-static protection, corrosion inhibition, and fuel system icing prevention (FSII, where required).

Product Name : Jet A-1 Aviation Turbine Fuel
Fuel Type : Aviation Turbine Fuel (ATF)
Appearance : Clear and Bright
Color : Water White to Straw
Density @ 15C : 775 - 840 kg/m
Flash Point : Minimum 38C
Freezing Point Maximum : -47 C
Sulfur Content Maximum : 0.30% (mass)

EN590 10 PPM Diesel Fuel is a premium quality ultra low sulfur diesel (ULSD) that complies with the European EN590 fuel specification. Containing a maximum sulfur content of 10 parts per million (ppm), it is designed for modern diesel engines equipped with advanced emission control systems. EN590 diesel delivers superior combustion efficiency, improved engine performance, reduced emissions, and enhanced fuel economy. It is widely used in passenger vehicles, commercial trucks, buses, agricultural machinery, marine applications, and industrial equipment across global markets.

Key Specifications
Product Name EN590 10 PPM Diesel Fuel
Standard EN590 European Standard
Sulfur Content Maximum 10 ppm
Density at 15 Degree C 820 - 845 kg/Cubic meters
Cetane Number Minimum 51
Flash Point Minimum 55 Degree C
Water Content Maximum 200 mg/kg
Viscosity at 40 Degree C 2.0 - 4.5 mm Square/s
Ash Content Maximum 0.01%
Appearance Clear, Bright & Free from Suspended Matter

EN590 Diesel Fuel 10 PPM is a premium-quality Ultra-Low Sulfur Diesel (ULSD) manufactured to meet the European EN590 fuel specification. With a maximum sulfur content of 10 parts per million (ppm), it is designed for modern diesel engines equipped with advanced emission control systems.

EN590 10 PPM is widely used in passenger vehicles, commercial fleets, heavy-duty trucks, buses, marine support equipment, power generators, and industrial machinery. It provides cleaner combustion, improved engine performance, and reduced exhaust emissions.

Product Name : EN590 Diesel Fuel 10PPM Grade
Grade : EN590 10 PPM (ULSD)
Sulfur Content ; Max.10 ppm
Cetane Number : Min. 51
Density @ 15C : 820 - 845 kg/m
Kinematic Viscosity @ 40C : 2.0 - 4.5 mm/s
Flash Point : Min. 55C
Water Content Max. : 200 mg/kg
Ash Content : Max. 0.01%
Lubricity (Wear Scar) : Max. 460m
Appearance : Clear and Bright
Color : Light Amber
Origin : As per refinery

Iron Ore is a naturally occurring mineral primarily used in the production of steel. It is one of the world's most important industrial raw materials and is supplied in various forms including lumps, fines, pellets, and concentrates.

Product Name : Iron Ore
Mineral Type : Hematite (FeO) / Magnetite (FeO)
Iron (Fe) Content : 58% - 65% (or as agreed)
Moisture : 8% Max (typical)
Silica (SiO) : 2% - 8%
Alumina (AlO) : 1% - 4%
Phosphorus (P) : 0.05% - 0.10% Max
Sulfur (S) : 0.03% Max
Size Lump : 10 - 40 mm / Fines: 0- 10 mm
Color : Dark Red to Black
Origin : As per supplier

Export Grade Urea 46% is a premium-quality nitrogen fertilizer containing 46% nitrogen (N), making it one of the highest-concentration solid nitrogen fertilizers available.

It is manufactured in granular or prilled form and is widely used for cereals, vegetables, fruits, sugarcane, oilseeds, and industrial fertilizer blending.

Product Name : Urea 46% Nitrogen
Chemical Formula : CO(NH)
Nitrogen (N) : 46.0% Min
Appearance : White Granules/Prills
Biuret : Max. 1.0%
Moisture : Max. 0.5%
Free Ammonia : Max. 160 ppm
Granule Size : 2 - 4 mm (90% Min.)
Solubility Completely Water Soluble
Shelf Life : 24 Months (Dry Storage)
Origin : As per supplier/manufacturer

Main component : Methane (CH)
Methane purity : 85% - 99%+
Boiling point: -162C
Density (liquid): 0.410.5 kg/L
Energy content : 48 - 55 MJ/kg
Sulfur content : Ultra-low (near zero)
Appearance : Colorless, odorless cryogenic liquid
Storage condition : Cryogenic pressurized insulated tanks

Jet A-1 Aviation Fuel is a premium-quality kerosene-based aviation turbine fuel designed for use in commercial aircraft, cargo planes, business jets, military aircraft (where approved), and turbine-powered helicopters. Manufactured in accordance with international aviation standards, Jet A-1 offers excellent thermal stability, low freezing point, high combustion efficiency, and superior engine performance. It is the most widely used aviation fuel for international flights and is suitable for modern gas turbine engines operating in diverse climatic conditions.

Key Specifications:
Product Name Jet A-1 Aviation Fuel
Product Type Aviation Turbine Fuel (ATF)
Fuel Standard ASTM D1655 / DEF STAN 91-091
Appearance Clear, Bright & Free from Suspended Matter
Flash Point Minimum 38 Degree C
Freezing Point Maximum 47 Degree C
Sulfur Content Maximum 0.30% (typically much lower)
Net Heat of Combustion Minimum 42.8 MJ/kg
Aromatics Content Maximum 25% (v/v)
Water Content Free from Water & Sediment

Liquefied Petroleum Gas (LPG) is a clean-burning, energy-efficient fuel primarily composed of propane, butane, or a mixture of both. Produced during natural gas processing and crude oil refining, LPG is stored and transported as a liquid under moderate pressure, making it convenient for distribution and use. It is widely utilized for domestic cooking, commercial heating, industrial processes, automotive fuel (Autogas), and agricultural applications. LPG offers high calorific value, efficient combustion, low emissions, and reliable energy performance, making it an environmentally friendly alternative to conventional fuels.

Key Specifications
Product Name Liquefied Petroleum Gas (LPG)
Product Type Hydrocarbon Fuel Gas
Appearance Colorless Liquid (Under Pressure)
Odor Odorized with Ethyl Mercaptan for Safety
Sulfur Content Very Low
Calorific Value 45 - 50 MJ/kg
Vapor Pressure As per Propane/Butane Ratio
Water Content Nil / Free from Water
Storage Pressurized Cylinders, Tanks & Bulk Vessels

Sliding door operators
Model ng-a aluminium framed glass door operator bi-slide/single opening/closing speed 25-1300mm/sec. Supports door weight upto 250 kg in total.
Model ng-f frameless glass door operator bi-slide/single side.

Opening width upto 4000mm operator length upto 8000mm.
Export ready kits average weight for standard kit including main extrusion 25-30 kg.

These dryers of modern advanced level are thermal type that dries clothes by a heat exchanger, ideal for drying fabric made of linen ,nylon, silk as well as leather and latex. They are featured by not being limited by natural climate, no needing sunning yard of large area, saving labor and high drying speed. As the indispensable ideal equipment for high class restaurants, hotels, hospitals, factories and industries of bleaching-dyeing, latex and laundry, they would be of unexpected help in improving service quality and business growing.

We provide different kinds of home textile products, such as Airline Blankets, Coral Fleece Blankets, Picnic Blankets, flannel blankets, Polar Fleece Blanket, Polar fleece scarf. Just to name a few. Our products mainly directly export to Europe, USA, UK, Canada, Italy, Spain, France, South Korea, and Japan ...We also co-operated with many well-known brands, such as Wall-Mart, K-mart, Target, Disney and so on.Our products are quality of AZO and Lead free, PAHS free, Phthalates free, Formaldehyde free, Cadmium free, Color Fastness(4-5Grade), Disperse Dyestuffs, Dimension Stability, Flame retardant according to FAR 25.853 for airline blanket. At the request of a client we can offer aproduct test, as well as many other kinds of service upon the clientâ??s request

Sandalwood Essential Oil:

We are a manufacturer of Sandalwood Essential Oil and at present only have one product we wish to sell, which is:- Sandalwood Oil (Santalum Spicatum) species.

This Oil is expensive and highly sort after, it is used in the preparation of High Quality Perfumes, Cosmetics and Pharmaceuticals it is also sold in small bottles on the internet for personal uses.

We would like to aim our sales at the wholesale market for manufacturers, If you advise selling to the individual market in small bottles (15 ml) is possible we would be interested. We would appreciate your advice as to how to present this unique specialised product to attract the best results.

Some background information on the product is:- The oil was originally extracted from the ancient Sandalwood Trees (Santalum Album) in India and is used in religious ceremonies as well as health care. These trees are almost extinct except for plantations. Australia is fortunate to have wild trees available as well as huge plantations coming of age of a very close relative, which is the Australian Sandalwood (Santalum Spicatum). This specie is gaining in market growth due to its close resemblance to the Indian variety, lower cost and availability.

We are a new manufacturer. We are located on a rural property, we use pure rain water in our steam distillation process, our equipment is new and modern, we produce a very high quality oil to ISO standard, ISO22769, Our oil is produced from Plantation Timber with strict Controls from the Authorities. We are able to supply Very Small to Large quantities and are usually able to supply from stock. We are eager for International Sales and wish to be a recognised reliable supplier and are environmentally friendly.

BUNYAH OILS
Sandalwood Essential Oil
Santalum Spicatum)
100 % Pure Clean
Product of Australia

We are a Family Company and are ambitious in our endeavours to provide service and quality to the market. We look forward to your care and assistance to advise us the best way forward.