MSL 547 - Misal Data Sheet:
Product Category: Water Bore Pumps
TKL SPECIFICATION:
THOMPSON KELLY & LEWIS (TKL) HIGH PERFORMANCE, MULTISTAGE TURBINE BORE PUMP NEAR NEW CONDITION
K&L Turbine Pump, 5 Stage; Type D.B.; Line shaft drive; overall length 930mm; very heavy unit, Secondhand Unit. Approx. Duty: 5l/sec @ 8m head (2900 rpm); Other duties also available; Equivalent to TKL Model 130LC;
Pump absorbed power approx. 7kW. For full turbine Pump performance / specification please refer to the enclosed Document 11248. This TKL Turbine Bore Pump has been used only once for a Water Bore testing and has been in storage for a period o time. The offered TKL Turbine Bore Pump is considered as in near new condition.
Notes: For the Pump system operation, the Turbine Pump is connected by set of line shafts inside column to the surface Drive head (Not part of the sale).
Drive of the Turbine Pump is derived from an electric motor / diesel engine (as the case may be) located at the top of the Bore (Not part of the Offer)
Neither of the above the above Items (i.e. Line Shafts, Drive Head or Electric Motor / Diesel Engine) are being offered as part of the above TKL Model D.B. Turbine Pump sale
Documents References - AVAILABLE ON REQUEST
The following listed document is provided for the Purchaser�¢??s perusal and consideration:
Document 11248 (16.12,2019) - TKL Type VML - VMS Catalogue and Performance Curves 6 Pages
Note: For additional details please refer to our following Websites
Model YONG-FENG Y120 CNC crimping machine has equipped with computer numerical control system, fast crimp and good quality. This machine features small and portable appearance, high crimp accuracy and easy to operate. It makes the mould base division to be more even through the double inclined plane eight-flap mould seat equipped with a high accuracy guiding device.YONG-FENG F32D crimper is mainly used for crimping processing for high pressure hydraulic hose assembly in the mechanical engineering. It can also be used for crimping steel pipes, especially large pipes and irregular shape pipes.
Model YONG-FENG Y120 CNC crimping machine has equipped with computer numerical control system, fast crimp and good quality. This machine features small and portable appearance, high crimp accuracy and easy to operate. It makes the mould base division to be more even through the double inclined plane eight-flap mould seat equipped with a high accuracy guiding device.YONG-FENG F32D crimper is mainly used for crimping processing for high pressure hydraulic hose assembly in the mechanical engineering. It can also be used for crimping steel pipes, especially large pipes and irregular shape pipes.
GREENMAX Polystyrene Melting Machine Mars C50 (M-C50) is the basic model of the Mars Series, the polystyrene recycling equipment specialized in reducing the volume of polystyrene waste with a high volume extrusion technology.
The volume ratio of the polystyrene compressed material that has been hot-melted by Mars C50 to the original foam waste can reach 90:1, which is convenient for transportation and recycling of granulated raw materials. Besides the polystyrene waste, Mars C-50 can also handle foam materials such as EPE, EPP, XPS, PSP, food tableware, and fish boxes. M-C50 is well suited for small warehouses, stores, shopping centers, or primary EPS recyclers.
GF centrifuge separatoris mainly used for separating all kinds of suspension which is difficult to be separated, especially suitable for separation of solid-liquid suspension with light concentration, heavy viscosity, fine particles and very small differential gravity of the two phases. such as clarification of herbs plants extracts, various medicine liquor, liquid medicine, oral liquid, the extraction of paint, dye, as well as various proteins, alga, fruit gels, and purification of rubber solution, coal tar, graphite, saponin, pectin, sirup, vaccine mycelia and all kinds of glucose; refining resin, and latex solution, enzyme (SOD) of oxide, various kinds of albumens, the glucoside of the soap, etc.
GQ series clarifying centrifuge is mainly used to separate all kinds of suspension liquid which is difficult to separate,
especially suitable for solid-liquid separation with small concentration, large viscosity, fine solid particles and small
difference between solid and liquid.For example: all kinds of traditional Chinese medicine extract, malic acid, fruit juice purification, all kinds of oral liquid clarification, graphite residue removal, graphite milk subdivision, ink refinement, various proteins, saponins, pectin extraction, the separation of each component protein in the blood, vaccines, mycelium, bacteria, paint, all kinds of resin rubber deep liquid purification.
GF105 Milk Cream centrifuge separatoris mainly used for separating all kinds of suspension which is difficult to be separated, especially suitable for separation of solid-liquid suspension with light concentration, heavy viscosity, fine particles and very small differential gravity of the two phases. such as clarification of herbs plants extracts, various medicine liquor, liquid medicine, oral liquid, the extraction of paint, dye, as well as various proteins, alga, fruit gels, and purification of rubber solution, coal tar, graphite, saponin, pectin, sirup, vaccine mycelia and all kinds of glucose; refining resin, and latex solution, enzyme (SOD) of oxide, various kinds of albumens, the glucoside of the soap, etc.
High-speed centrifuge separator are widely used in a variety of biological processes from cell harvesting and clarifying to separations of chemicals, food, blood and pharmaceuticals. High performance is consistently achieved in continuous, semi-continuous or batch operations.
Two-stage Pusher Centrifuge is a kind of perforated basket centrifuge, both continuous and effective. The mixture to be separated is fed through the feeding pipe and the distributor continuously and evenly into the first stage basket. Most of the mother-liquor in the feed, acted on by centrifugal force, departs through the sieves into the liquor-collecting casing where it will be discharged out of the machine. The first stage basket rotates and reciprocate, pushing the formed product cake into the second stage basket .The cake can have sufficient retardation in the centrifuge with being acted on by more centrifugal force, and therefore, the desired humidity of the cake can be guaranteed. Afterwards, the cake is continuously discharged out of the basket. In case of high purity for the solid product, the effective washing can be carried out in the centrifuge. If necessary, the washing agent and the mother-liquor can be discharged separately.
Continuous automatic industrial pusher centrifuge for salt centrifuge machine,the application of MVR energy-saving technology makes the salt heat source be the repeated use of secondary steam latent heat, improves the thermal economy of steam, achieves the purpose of energy saving and consumption reduction, and saves the operating cost and floor space of the boiler room and circulating water system, saving A large amount of circulating cooling water reduces the emission of waste gas, waste residue and waste water, and belongs to green environmental protection technology and equipment. Resources can be used to reduce costs and improve efficiency.
Two-stage Pusher Centrifuge is a kind of perforated basket centrifuge, both continuous and effective. The mixture to be separated is fed through the feeding pipe and the distributor continuously and evenly into the first stage basket. Most of the mother-liquor in the feed, acted on by centrifugal force, departs through the sieves into the liquor-collecting casing where it will be discharged out of the machine. The first stage basket rotates and reciprocate, pushing the formed product cake into the second stage basket .The cake can have sufficient retardation in the centrifuge with being acted on by more centrifugal force, and therefore, the desired humidity of the cake can be guaranteed. Afterwards, the cake is continuously discharged out of the basket. In case of high purity for the solid product, the effective washing can be carried out in the centrifuge. If necessary, the washing agent and the mother-liquor can be discharged separately.
Our company is the largest producer of the decanter centrifuge in China!
Sludge Decanter Centrifuges Features:
1. Designed with compact structure and pleasant appearance
2. With large processing volume and above 98% solid capture rate
3. Automatic control, which enables low operation intensity and reliable operation
4. With small space occupation, consecutive work and low noise level
LW Horizontal Decanter Centrifuges feature continuous feeding and discharge . This chemical separation equipment has been applied two-phase(solid-liquid) and three-phase(solid-liquid-liquid) slurries separation industry of chemicals, pharmaceutical, environment protection, as well as mining and food, etc.
Shenzhou Centrifuge has been dedicated to producing machinery and equipments and carrying out facility construction, pursuing the best quality and producing the best product at the same time.We are committed to reward you with a better quality in return for our interest in and faith toward.We will do our utmost for one more stepping forward, based on our infinite services and trust to customers.
Description :
LW Sedimentation Centrifuge is a horizontal, continuously working and continuously spiral discharging sedimentation centrifuge. It is used in a variety or industries for separating all kinds of solid liquid suspension, defecating liquid phase with graded grains, and dehydrating sludge.
2 phase Decanter Centrifuge:
After entering into the high-speed turning drum, the solid-phase particles in the mixed liquid run and settle on the drum wallunder the action of greatest centrifugal force; the light liquid settles at the innermost place of the drum under minimum centrifugal force; same as the drum's turning direction, a screw feeder also turns at a high speed, and a constant speed difference is generated by the differential mechanism, then the liquid will be discharged by the liquid outlet.
3 phase Decanter Centrifuge:
Principle of threephase decanter centrifuges is as shown in the above figure. The substance to be separated is fed by the feeding tube into the accelerating cavity of the spiral conveyor, then enters high speed running drum wall. As the light liquid, heavy liquid and insoluble solid contained in the substance have different specific gravities, the three materials are subject to varied centrifugal forces: the insoluble solid settles into the inner wall (outside) due to its highest specific gravity and subject to maximum centrifugal force; the light liquid settles maximum far away from the inner wall (outside) due to its lowest specific gravity and subject to minimum centrifugal force; and heavy liquid settles in the middle place. The insoluble solid is discharged from the solid discharge port by a spiral feeder which has relative differential speed with the drum; and the light and heavy liquids are then separated by different structures inside the machine wherein the heavy liquid is discharged by the centripetal pump, and the light liquid is discharged via the force of gravity, thus the purpose of three phase separation is achieved.
Description :
LW Sedimentation Centrifuge is a horizontal, continuously working and continuously spiral discharging sedimentation centrifuge. It is used in a variety or industries for separating all kinds of solid liquid suspension, defecating liquid phase with graded grains, and dehydrating sludge.
110 Industrial Machinery Plants Suppliers
Short on time? Let Industrial Machinery Plants sellers contact you.
