PRODUCTS DESCRIPTION
Components:
The HIGH TENSILE ROCKFALL MESH system consists of four main components that are carefully coordinated with each other:
1. HIGH TENSILE ROCKFALL NET Ã?Â
It is made of high-tensile steel wire with an ultimate tensile strength of 1770 N/mm2.
Detailed Product Description:
1. wire diameter:3mm
2. high tensile strength 1770Mpa
3. mesh size:80mm x 140mm
4. Mesh shape:diamond
5. Material:high tensile steel wire
6. Corrosion protection:super coating
7. Coating:150g/m2
8. Breaking load of single wire:12.5KN
9. Tensile strength:110KN/m
HIGH� TENSILE� ROCKFALL� MESH mesh standard roll:
Mesh edges knotted
Roll width:2.3m-3.5m
Roll length:110m-30m
Weight:1.75kg/m2
2. SOIL OR ROCK NAILS
Adapted to the local soil and rock static requirements, the HIGH TENSILE ROCKFALL MESH can be anchored in accordance with our dimensioning concept with commercial soil or rock nails.The main anchors of the system are installed in a grid typically from 6.6 to 16.4 ft (2.0 to 5.0m)horizontal and vertical spacing.Actual spacing depends upon the results of site analysis and modeling. Anchor consist of commercially available steel bars ranging from 1.0 to 1.25 ft (25 to 32mm). Selfdrilling grout injection anchors are also permitted.Additional anchors may also be used to provide added support at boundaries and in low points and hollows.
3. SPIKE PLATES
Rigid spike plates that are reinforced with ribbing ensure optimal load transmission from soil or rock anchors to the HIGH TENSILE ROCKFALL MESH. These plates are placed over the anchor heads and tightened to pre-tension the mesh onto the slope. The plates are galvanized and have dimensions of 13.0''*7.5"*0.4"(330mm*190mm*10mm).
4. CONNECTION CLIPS
The connection clips high-strength steel wire connection clips enable mesh sections to be joined without overlapping and still guarantee one hundred percent transfer of forces. These claw are hot dip galvanized and consist of 0.25"(6mm) thick steel spiral.
5. SOIL OR ROCK NAILS
Adapted to the local soil and rock static requirements, the HIGH TENSILE ROCKFALL MESH can be anchored in accordance with our dimensioning concept with commercial soil or rock nails.The main anchors of the system are installed in a grid typically from 6.6 to 16.4 ft (2.0 to 5.0m)horizontal and vertical spacing.Actual spacing depends upon the results of site analysis and modeling. Anchor consist of commercially available steel bars ranging from 1.0 to 1.25 ft (25 to 32mm). Selfdrilling grout injection anchors are also permitted.Additional anchors may also be used to provide added support at boundaries and in low points and hollows.
Anping Xinghong Metal Wire Mesh Co., Ltd.� is a leading slope protection netting manufacturer and supplier in China. We provide high-quality and low-cost slope protection netting, or contact us to send your customized requirements, we will design and extend suitable for you wire mesh.
Material: highly abrasion-resistant spring steel or stainless spring steel.
Opening size: 2.0 - 80.0 mm Wire diameter: 0.8 - 8 mm
Installation instructions: the screen is installed with using of tensioning metallic bars into a separator over different types of hook strips, further with using of side bars and wedges, possibly is
Hole type: square, rectangular and long slot. Surface treatment: galvanized or painted.
Product description: Mainly used as screen mesh, it is widely used in many industries, such as mining screen, quarrying screen, the screen deck, screen wire for stone crusher; Vibrating screen;
Application:
* Safety grids (e.g. car industry, mechanical engineering, building industry)
* Filling elements for gates and fences in buildings and gardens
* Booth construction
* Plant breeding
* Pigeon barriers
* Noise protection
Material:
High tensile screen cloth is commonly used in heavy duty applications for scalping and sizing of rocks,aggregates,limestone,etc. They are weaved in sizes to suite most vibrating screens and available in:
* High Tensile Steel---Abrasion resistance
* Stainless Steel---Corrosion resistance
* Monel,Brass,etc---General applications
Special sizes can be customized according to your requirements
Stainless steel is selected for their wear-resisting, heat-resisting, acid-resisting and corrosion resisting characteristics. Many different grades of stainless are used in wire cloth. T304 is the most common, but other are used in specific applications to take advantage of each grades unique properties. The wire mesh made of stainless steel is extensively used in mining , chemical industry, food industry and pharmaceutical industry.
Wire Materials: SUS302, 304, 316, 304L, 316L.
Characteristics: Square aperture, less rigid than plain weave, especially suitable for deforming, strong wire cloth due to ratio of wire diameter and aperture, it is mostly used for filtration less than 63 m .
Material:
* High quality iron rod
* Stainless steel wire
* Low carbon steel wire
* PVC coated wire
Surface Treatment:
PVC, PE or PP powder coated, electro galvanized, hot dipped galvanized
Weaving and Characteristic:
The warp bended beforehand is welded with the weft with the surface treated by galvanizing, hot-galvanizing, PVC coating, PVC plating and they have such characteristics as beautiful appearance, smooth mesh, firm welding, good beforehand bending property, steadiness, good anticorrosion and resistance to aging.
Application:
Holland wire mesh are used in high quality wire rod as raw material, then welded panel or rolled fence. After galvanization and PVC dipped coating, it can resist the corrosive and ultraviolet radiation very strongly.
Holland wire mesh is beautiful and solid, easy to transport and install, widely used for fencing or enclosure in the highway, railway, airport, housing area, garden, park, etc.
Expanded metal mesh is also called pulled plate wire mesh. A rigid piece of metal that has been slit and drawn into an open mesh pattern in a single operation. It is stronger, lighter in weight and more rigid than the original base metal.
Expanded metal mesh material are carbon steel plate, stainless steel, galvanized steel, aluminum, aluminum foil, lead, nickel plate, titanium, aluminum-magnesium alloy panels. Conventional mesh is formed in a diamond pattern. It has other pattern of hexagonal, round, triangle, scale-like opening.
Features and benefits of expanded metal mesh:
1. The mesh is formed from a single piece of metal
2. The process is not wasteful of material
3. Higher strength-to-weight ratio than sheet metal
4. Anti-slip surface
5. Excludes and retains simultaneously
6. Premium reinforcement properties
7. Practical and effective screening
8. High efficient conductor
9. Super corrosion resistance
Expanded metal mesh has a wide range of uses, graceful shapes , strong processing capability. A major advantage of expanded is that the mesh is formed from a single piece of material and the process is not wasteful and therefore cost effective.
Main use: metal surface treatment and after processing, are widely used in large venues, both inside and outside decorative, aerospace, petroleum, chemical industry, metallurgy, medicine, paper making, filtration, breeding, packing, mechanical facilities, protection, handicraft manufacturing, high-grade speaker grille, childrenâ??s seat, baskets, basket, highway protection, and heavy machinery, boilers, oil mines, locomotives, tonner steamship, work platform, staircase, walkway. Also can be used for construction, highway and bridge as reinforced use.
The term of expanded metal mesh:
SWD (Short Way of the Diamond) is the distance from the middle of the bond on one side to the middle of the bond on the opposite side.
LWD (Long Way of the Diamond) is the distance across the largest dimension of the diamond measured halfway between the diamonds.
SWO (Short Way of the Opening) is the width of the opening of the shortest side of the diamond. SWO does not include the strand width, where SWD (Short Way of the Diamond) does.
LWO (Long Way of the Opening) is the length of the opening of the longest side of the diamond. LWO does not include the strand width, where LWD (Long Way of the Diamond) does.
Strand and Bond Expanded metal is composed of strands and bonds. Strands form the sides of the expanded metal openings. Bonds are where the strands intersect. In other words, the bond is where each diamond shaped opening is connected with the next opening.
Thickness is the measurement from the top surface to bottom surface of the expanded metal piece.
Expanded metal Roll: that the specific length and width of the wound into the roll of steel mesh.
Expanded metal sheetï¼? The expanded metal that show specific length and width.
Material: Galvanized iron wire, or stainless steel wire.
Property: Square Wire Mesh is made of selected low carbon iron wire with precision construction,uniform mesh, fine rust-resisting and durable function.
Packing:In rolls,wrapped with waterproof paper then covered with hessian-cloth. Special packing may be arranged if necessary.
Uses: Square Wire Mesh is widely used in industries and constructions to sieve grain powder,filter liquid and gas,for other purposes like safe guards on machinery enclosures. Besides,it is widely applied for the substitute of wood strips in making wall and ceiling.
Specifications: Please refer to lists below for reference. Sizes not listed available at customers request.
Assortments available:
Crimped square wire mesh
Standard square wire mesh
Hot-dipped galvanized after woven square wire mesh
Galvanized after woven square wire mesh
Galvanized before woven square wire mesh
Iron square wire mesh
Hexagonal wire netting is used for feeding chicken, ducks, gooses, rabbits and the fence of zoo,etc. Wire netting with hexagonal opening offers good ventilation and fencing uses. Hexagonal wire netting is made of twisting carbon steel wire, electro or hot dipped galvanized, then plastic coated, or plain.
Materials: Low carbon steel wire, stainless steel wire or brass wire.
Processing: Twisted before galvanized, weaving after galvanized. Electro galvanized, hot dipped, plastic-coated, stainless steel, PVC coated, etc.
Weaving type avaliable include: Straight twist, reverse twist, double-direction twist.
Wedge wire mesh
Wedge wire mesh is also known as V wire mesh.It is formed by stainless steel wire pressure welding.It has good screening ability,good corrosion resistance.And rugged durability.
Material:304/316/201/205/904L/galvanized metal
Wire shape: V wire/ Round wire /Square wire
Backflushing performance: It has Convenient flushing,convenient flushing.
Alkali resistant fiberglass mesh is woven by fiberglass yarn as its basis mesh, and then coated by alkaline resistant latex. It has fine alkaline-resistant, high strength, etc. As an ideal engineering material in construction, it is mainly used to reinforce cement, stone, wall materials, roofing, and gypsum and so on.
We can produce any size mesh according to requirements of customer like different mesh size and weight per square meter.
We can supply special mesh as following
1. High strength mesh,
2. Fire proof mesh .
3. Strong and fl exibl e mes h
We can supply specifications from 30g/m2 to 500g/m2 for mesh.
Main size: 5mm x 5mm or 4mm x 4mm, 75 g/m2, 90 g/m2, 125 g/m2,145 g/m2, 160 g/m2.
Application
1. Wall reinforced material (such as fiberglass wall mesh, GRC wall panels, EPS insulation with the wall board, gypsum board, bitumen)
2. Reinforced cement products.
3. Used for Granite, mosaic, marble back mesh etc.
4. Waterproof membrane fabric, asphalt roofing.
Example of applications
1. 75g / m2 mesh fabric used in the reinforcement of thin slurry, to eliminate small cracks and scattered throughout the surface pressure.
2. 110g / m2 mesh cloth is widely used in indoor and outdoor walls,prevent the various materials(such as brick, light wood, prefabricatedstructure) of treatment or caused by a variety of expansion coefficient of wall crack and break.
3. 145g/m2 mesh fabric used in the wall and be mixed in variousmaterials (such as brick, light wood, prefabricated structures), to prevent cracking and scatter the whole surface pressure, especially in the external wall insulation system (EIFS).
4. 160g / m2 mesh fabric used in insulator layer of reinforcement in the mortar, through shrinkage and temperature changes by providing a space to maintain movement between the layers, prevent crack and rupture due to shrinkage or temperature change.
Specification
Mesh size 5x5 mesh, 5x4 mesh, 4x4 mesh, 3x3 mesh, 2.5x2.5 mesh, 1x1 mesh
Weight/square meter 60g-300g
Each roll length 10m, 20m, 30m, 50m-300m
Width 0.5m-2m
Mesh size 16x16 mesh, 15x14 mesh, 12x12 mesh, 10x10 mesh, 9x9mesh, 8x8 mesh, 6x6 mesh
Weight/square meter 40g-120g
Each roll length 10m, 20m, 30m, 50m-300m
Width 0.05m-2m
Packing plastic packing or woven bag or packing according the customer's requirements
Color white,blue,green,red,yellow,
Zonel Filtech as one of the most professional filter materials manufacturers whom equipped with most advanced projectile looms and the finish treatment machines whom can offer the full ranges of screen meshes / bolting cloth for different industrial occasions for various usages.
Product range:
Polyester bolting cloth for printing and general filtration;
Polyester flour meshes;
Polyamide/nylon bolting cloth for printing and general filtration;
Polyamide/nylon flour screening meshes;
PP filter mesh/PP screen meshes.
Mesh opening: 25 ~ 1800micron
Width: within 3.6meters can be customized.
Conecc manufacture Woven Wire Screen Cloth and Perforated Sheet Panels for various types of Crushers, Asphalt /Batch Mix Plants, Screening Plants ranging from various Original Equipment manufacturer and Infrastructure /Construction companies having their operations in India and Abroad.
Folding Insect Screen
Folding Insect Screen, also named Pleated insect Window Screen is made of woven E or C class filament yarn coated with latex coating used for highly effective mosquito and insect screen.
Folding Insect Screen, also named Pleated insect Window Screen is made of woven E or C class filament yarn coated with latex coating used for highly effective mosquito and insect screen. This is a new style of window screen and mosquito shields.
Folding window screen can be made into two types: single or double panels.
Folding window screen comes in special colors upon request to suit your specifications. The most popular colors are black and gray.
Main Features:
1. Its material is friendly to environment and has good chemical stability: Alkali-resistant, acid-resistant, waterproof, strong resin bonding.
2. Coating glue is produced by Germany BASF which can keep 60-80% strength after test.
3. It has 20% extra strength and beauty surface than normal fiberglass yarn!
4. Its strength retention rate> 90%, elongation
Perforated Metal Mesh
Perforated Metal is also named Perforated Mesh, Perforated Metal mesh, or Punched Metal, It can be supplied in folded or flat panels. From various metal plate. punched openings can be round, square, t
Materials: galvanized plates, cold plates, stainless steel plates, aluminium plates, aluminium magnesium alloy plates, etc.
Features: Perforated Metal is also named Perforated Mesh, Punched Metal mesh, or Punched Metal, It can be supplied in folded or flat panels. From various metal plate. punched openings can be round, square, triangle, diamond, hexagonal, cross, etc.
Application:
The opening size, density and forms of distribution can bring different functions in separation, sifting, filtration, drying, cooling, cleaning, etc.
The Perforated sheets can be used with advantage in many situations, for instance when requiring sound reduction, weight saving, air control, filtering, a decorative surface, or simply a non-skid effect.
Based on their many qualities, perforated sheets are well suited for sorting, facades, ceilings, lamps, shelves, shielding, steps and of course many other purposes as well.
It can be done according to the requests of the customers.
Perforated metal mesh production process:
Raw Material(metal sheet,stainless steel plate)---Measure Size----Choose hole mold---Perforated with machine---Determination---Packing---load
The Sintered Stainless Steel Multi-Layer Wire Mesh Laminated Plate is a product constructed by overlapping multiple layers of woven wire mesh and subsequently sintering them in a vacuum furnace under high temperatures and pressures. This process enhances the strength and overall durability of the material while ensuring uniform filter aperture distribution. By addressing the limitations of individual layers such as reduced strength, poor rigidity, and unstable aperture size, this sintered multi-layer wire mesh plate offers a balanced combination of filter rating, permeability, and robustness.
Ideal for applications demanding high filter accuracy, resistance to pressure differentials, abrasion, heat, cold, and processing, this product finds utility across various industries including petrochemicals, nuclear, synthetic fibers, pharmaceuticals, food, and aerospace.
Sintering can be applied to various types of woven wire meshes, effectively bonding all wires together to prevent medium migration. Through the vacuum furnace sintering process, the wires are fused securely, ensuring stability and eliminating the risk of component failure or malfunctions in critical applications such as medical or hydraulic fluid filtration. Once sintered, the mesh structure remains fixed, preventing wire movement under pressure and ensuring consistent aperture sizes throughout its service life.
What is the structure of 5-layers stainless steel wire mesh plate?
The structure of TOPTITECH's five-layer laminated board, a widely adopted sintered wire mesh design, involves layering a single fine wire mesh between two thicker square woven meshes and enclosing them within two robust Dutch woven metal wire meshes. This configuration is sintered to create a solid plate, with the subtle wire mesh acting as the filter bed. Customizable to specific filtration requirements ranging from 1 micron to 200 microns, this design offers versatility and precision in filtration applications.
TOPTITECH's 1.4mm Thickness Multi-layer (3 layers) Titanium Mesh for Electrolyzer features a multi-layer design, each meticulously crafted layer offers superior strength, corrosion resistance, and conductivity. The optimized thickness of 1.4mm strikes the perfect balance between structural integrity and efficient electrolysis, ensuring uniform current distribution and minimizing energy loss.
Crafted with precision, TOPTITECH's titanium mesh features a multi-layer design, consisting of three distinct layers. Each layer is meticulously engineered to deliver exceptional strength, corrosion resistance, and conductivity. The combination of these layers ensures optimal performance and longevity, even under demanding operating conditions.
Features
Enhanced Strength and Durability: Our titanium mesh features a multi-layer construction that delivers superior strength and durability. Withstanding high pressures and harsh chemical environments, this mesh offers long-lasting performance, reducing maintenance and replacement costs.
Excellent Conductivity: Crafted from high-quality titanium material, our mesh exhibits excellent conductivity. The multi-layer design ensures uniform current distribution, enhancing electrolysis efficiency and minimizing energy consumption.
Superior Corrosion Resistance: Titanium is renowned for its exceptional corrosion resistance properties. Our titanium mesh withstands various corrosive substances and environments, making it ideal for electrolytic processes involving strong acids, alkalis, and other corrosive media.
Improved Energy Efficiency: Harness the power of energy efficiency with our titanium mesh. Its multi-layer construction and excellent conductivity ensure minimal energy loss during electrolysis, maximizing energy utilization and reducing operational costs. Contribute to sustainable practices while achieving optimal results.
Precise Current Distribution: Achieve precise and uniform current distribution with our titanium mesh. The multi-layer design enhances the flow of electrolytes through the mesh, ensuring consistent and controlled electrochemical reactions. This promotes high product quality and minimizes the risk of uneven deposition or plating.
Sustainable Solution: Embrace sustainability with our titanium mesh. Made from a recyclable material, it offers a greener alternative for your electrolysis processes. Its long lifespan and reduced energy requirements contribute to environmental conservation and align with your eco-conscious goals.
Differences Between Multi-layer Sintered Titanium Mesh and Multi-layer Sintered Stainless Steel Mesh
The multi-layer sintered stainless steel wire mesh filter tube is a type of filter component. It is formed by multiple layers of fine stainless steel wire mesh and the gaps between the layers are bonded through a special high-temperature sintering process, creating a tubular structure.
This type of filter tube typically employs high-quality stainlessThe manufacturing process of this type of filter tube involves several steps:
Selection of high-quality stainless steel wire materials, such as 316L stainless steel wire, typically arranged in multiple layers.
Selection of high-quality stainless steel wire materials. This causes the layers of wire mesh to sinter and fuse together, creating an integral filtering structure.
Filter tubes form a fixed grid structure. With precise pore sizes and a certain level of filtration accuracy, effectively filtering out tiny particles and impurities in liquids or gases.
Finally, the tube is cut or customized into different sizes and shapes to meet specific filtration requirements.
The main features
Effective Filtration: To ensure sterility and hygiene, pharmaceutical factories routinely perform thorough cleaning and disinfection of pharmaceutical tools and filtration equipment. Sintered stainless steel powder filters facilitate this process as steel, unlike other metals, has fewer pores that easily trap impurities.
Micron-Level Pores: The mesh filter core can remove particles as small as 0.2 microns and can be customized for your specific equipment. Stainless steel's malleability and stable performance are robust. Choosing the appropriate stainless steel sanitary filter depends on its application within the processing unit.
Easy Cleaning and Disinfection: The popularity of sintered stainless steel filters in the pharmaceutical industry stems from their ease of cleaning and disinfection. Maintaining equipment cleanliness ensures prolonged equipment lifespan while minimizing contamination risks.
High and Low-Temperature Resistance: Stainless steel alloys are known for their excellent performance at both high and low temperatures. At high temperatures, stainless steel demonstrates outstanding compressive strength, making it suitable for high-temperature filtration needs. Conversely, at lower temperatures, stainless steel's tensile strength actually increases more than at room temperature, making it ideal for refrigeration and low-temperature filtration equipment.
Perforated sheets, also known as perforated metal, perforated plate, or perforated screen, is sheet metal that has been manually or mechanically stamped or punched using CNC technology or in some cases laser cutting to create different holes sizes, shapes and patterns. Wire mesh is commonly used in industrial application when separation or filtration is needed.
2014 Wire Mesh Gratings Suppliers
Short on time? Let Wire Mesh Gratings sellers contact you.
