FEATURE OF PRODUCT Fully meet all kinds of lead-free soldering process requirements; WindowsXP operating system, Chinese and English interface, easy to learn; Standard air furnace, patented hot air system, using hot air convection conduction is more efficient, thermal compensation is faster; PLC+PID closed-loop control, stable and reliable performance, high temperature control and curve repeatability; Dual temperature sensor, dual safety control mode, abnormal speed alarm, off-board alarm; Fully modular design for faster maintenance and reduced maintenance time and cost; The rail is dael with hardened process to make it more stability.
The conveyor chain adpoted with single Pin-plate design.
15% Heat transferring efficiency wasimproved to deal with more complicated and larger products.
Board width: 30-400MM
Tin furnace capacity: 200KG
Normal power / total power: 2-5KW/10KW
Starting power: 7KW
Machine size: 3050*1160*1360
net weight: 400KG
Transport motor: 3Ph 380V 60W
Transportation speed: 200MM-1800MM/Min
PCB transportation method: From left to right
power supply: 3Ph 380V 50HZ
PRODUCT PERFORMANCE
1, Chinese and English man-machine interface, can be switched at any time
2, Full touch screen plus PLC control, all parameters are set, saved and recalled in the touch screen
3, With two temperature measurement interfaces, the tem-
perature curve can be tested with the temperature measure-
ment line.
4, Brand controling system like Mitsubishi, SchneiderOmron etc will warrant the stability of the machine
5, CE certificated
6, Entrance of machine, It can connect with inserting con veyor directly
7, Stainless steel long shaft pin chain conveyor, never abra-
sion
8, Stepper motor for sprayer driving, sider/rail for sprayer guiding Sprayer moving speed can be setin touch screen.
9, Moving speed will not be influent by air pressure.
10, Compare with air cylinder driving, it's moving quietly, stably, less maintenance, longer lifetime.
11, Any parts contact with solder they are made of Ti(not plated TI, not cast iron pot). Just like solder pot impeller, wave tunnel, wave nozzle, bolts and nuts etc.
So to grantee the lead free solder's pureness and kep the pot no eroded.
12, Cavesr apeathat at eftef mexdire
High Precision Wedge Wire Screen Filter Pipe Wedge Wire Pipe /Tube/Cylinder Wedge Wire Screen
Wedge Wire Screen Filter Pipe FEATURES
Wedge wire screen also named as stainless steel V shaped wire screen, Johnson screen , Water well screen, Rod based wire wrapped screen, Wedge wire screen pipe etc.
stainless steel wedge wire screen pipe PARAMETER
Characteristics:
1. Many varied applications in sieving, sorting and separating.
2. Wedge Wire surface is self-cleaning.
3. Various construction types:From outside to inside, or from inside to outside.
4. Wedge Wire on Vee shaped bars for light duty.
5. Wedge Wire on fins for medium or heavy duty.
6. Grates edged with flat bar or angle.
7. Highly polished grates for wet areas, bars or bench tops.
8. Heavy grids and support bar systems for absorption vessels.
9. Grates and grids made as single or multi-part items.
10. Materials to suit applications (Stainless steel 304 or 316, mild steel etc)
High Precision Wedge Wire Screen CONFIGURATION
Wedge Wire Johnson Screen Filter
Specification (Profile wire): Width(mm): 1.0 1.2 1.5 2.0 2.2 3.0 3.2
Height(mm): 2.0 2.5 3.5 4.6 5.0 6.0
Specification (support rods): Width(mm): 2.0 3.0
Height(mm): 3.0 4.6 5.0 6.0 7.0
Round: From 2.50mm to 6.0mm
Note: other wires and rods available upon request
Slot size 0.10, 0.15, 0.20, 0.25, 0.30�� 100mm also achieved upon request.
Material: Stainless steel 304, 304L, 316L ,321 etc.)
Length Upto 4 meters
Diameter 29-1200mm
Screen end Plain beveled ends, male/female threaded, flange, close up.
Other sizes available on request.
Advantage Reduce energy consumption and increase water flow.Reduce erosion of entry surfaces and increase well life.Allow a uniform and efficient well development.Reduce significantly potential pump damage and subsequent maintenance costs.
JR-N wire winding and torsion testing machine is a testing machine used to test the toughness and adhesion performance of overhead stranded wire frame and (or) reinforced galvanized steel wire, which meets the requirements of GB/T3428-2002 Galvanized Steel Wire for Overhead Stranded Wire: Winding and Torsion Test.
It is the important equipment of front preparation in welding pipe mill line ,maily used to hold steel strip to make coils unfold ,supplying raw material for the production line.
Including single cone, double cones, butt-to-butt cone.
3219 Welding Wire Mesh Machinery Suppliers
Short on time? Let Welding Wire Mesh Machinery sellers contact you.
Rivet welding China-Welding processing China-ZhunFeng Heavy Industry (Dalian) Co., Ltd. is located in Yongjun Road of Jinzhou District,Dalian, was founded in 2010, professional engaged in sheet metal , riveting welding and laser cutting processing.
Having 8*4 metres bending machine, 160 tons * 4 meters shearing machine, Large floor type boring machine, CNC lathe, Machining center, CNC Medium Speed Wire Cut EDM, EDM machine tool, Electric welder, Two oxygen welding machine, Argon arc welder, Plasma cutting machine, 15000W laser cutting machine, 425 type sawing machine, 80 tons punching machine ect ,total more than 60 devices.The annual production and processing capacity is 300000 pieces.
The company perennial provide riveting processing, laser cutting services for Dalian Port Group, Intel, YKK, TDK and other well-known enterprises .
Business scope: Sheet metal processing, Riveting processing, Laser cutting processing, Machining, Plate Cutting , Bending, Argon arc welding, Welding copper, Welding aluminum, Titanium alloy welding, Various types of white steel products, Sheet Metal Parts China, Laser Cutting China, China machining factory, Thin plate electronic control cabinet products, Connectors, Stainless steel products, China welding, China machining, Aluminum and aluminum alloy welding products, Dust cover, Distribution box, Equipment shell, Frame welding, Structural parts and so on.
Welding chiller is a special industrial process chiller for cooling welder machine or welding process. TopChiller is a leading welding chiller manufacturer with 20 years experience.
A welding machine is very important for modern industry including: resistance welder,spot welding, projection welding, seam welding, butt welding and flash welding.
Water cooling plays an important role in the welding process and the welder machine. As we all know, there is boring heat during the welding process.
If we dont remove the heat timely, it will cause harm to both the welding machine and the welder.
Welding chillers can take away the excess heat from the welding machine and welding guns during welding processing to keep it safe and in good working conditions.
TopChiller offers a complete line of industrial chillers available for welding machines and welders including resistance welding machine, spot welding machine, and a laser welding machine.
The welding chiller with a cooling capacity range from 1 to 40 tons, 3KW to 180KW and temperature stability of +/-0.5 to +/-2.
Each welder water chiller is self-contained, closed-loop or open-loop depending on the project requirements, with pumping and piping system.
All welding chillers designed and manufactured by TopChiller features non-ferrous water circuit construction consisting of a stainless steel water pump, stainless steel evaporator, energy efficient and reliable scroll compressor, R407c ozone friendly refrigerant charged before delivery.
As a leader of welding chiller supplier, TopChiller is willing to provide all technical support for your welder and welding machine.
TopChiller is a professional welding chiller manufacturer, TopChiller has exported many welding chillers to the Philippines, Australia, New Zealand, Malaysia, Singapore, Indonesia, Chile, Mexico, Costa Rica, Brazil, Argentina, Colombia, South Africa, Nigeria, Saudi Arabia, Dubai, Spain, Italy, etc.
If you are looking for a reliable welding chiller supplier in the market, TopChiller is your best choice.
Just contact TopChiller sales, and tell all the chiller requirements to get a free quotation for your welding machines.
FMC Butt Welding 15000PSI FIG1502 Hammer Union
Product Description
Hammer union is mainly used in oil industry in high-pressure pipline connectio. Size have 1" to 5", work the pressure 7Mpa to140Mpa(1000psi-20000psi), the API 6A and 16C cetification, prevent H2S union according to the NACE standard MAr0175.
Design features:
1.with self-lockubf type ACME thread design;
2. repd tightening and remove;
3. made by international standard, and can be interchangeable with imported parts;
4. Seal with high pressure resistance;
5.Using NC mechine tool processing Seiko degree is high;
6. Type, specification identifies die forging on the wing nut, identification and convenient;
The Tufflex screens, particularly those that are only partially welded and which give off a secondary vibration effect, have the capacity to self-clean, providing the site with the capacity to run all year round. Thus, the cost of the replacement screen isnt the only metric to measure; this site has had a 35 to 40 per cent improvement in production capacity, allowing it to service customers throughout the year.
The Tufflex screening range is available with either square or rectangular apertures of varying sizes. The screens are either welded on every junction, or partially welded at every second intersection. The polyurethane coating provides extended wear life when compared with traditional wire screens, which become worn as aggregate and rocks are compounded over them. The composition of the polyurethane provides some slip for the product to be screened effectively while causing minimal damage to the screening substrate. Depending on the product being screened and the surrounding regional climate, HUATAO Groups extractive team can assist in the selection of the most appropriate Tufflex combination.
OHS is not potentially the first criteria when selecting a screen type but as we all continue to focus on improving the safety of our employees, customer and contractors, the OHS elements of any choice are increasingly important. Tufflex screens are far lighter than their traditional woven wire counterparts. They are usually supply rolled and can be manoeuvred by one person, in sharp contrast to traditional woven wire, which necessitates a forklift, pallet or even boom lift to be lifted on-site. OHS practices may require three points of contact, and therefore moving screens using more than one person, but this task is even safer and easier given the reduced weight of Tufflex.
Cuts and abrasions normally associated with traditional screening media are all but negated; there are no sharp edges caused by cut wires along the edges of screens. Tufflex screens are fully encased in polyurethane, with only the hooks outstanding.
Tufflex polyurethane screens come in fully welded, partially welded and rectangular welded variations. The brightly coloured material is lightweight and smooth, which makes it much easier to handle when delivering, storing, installing or removing.
Screening innovation in the past has been limited to tweaks and modifications, slightly different apertures or better hooking. The introduction of Tufflex screens a few years ago was akin to the introduction of smartphones versus traditional mobile phones. We never really knew we needed a phone with a camera, a GPS and in-built games, but now its hard to imagine life without one.
Just as smartphones cover off the traditional functionality of making phone calls, Tufflex is used for screening product in the quarry market. It offers improved screening efficiency, substantially increased wear life, increased production uptime and occupational health and safety (OHS) benefits due to its light weight and flexibility.
While there are a set range of apertures (1.5mm to 45mm square) to choose from, the Tufflex process has great flexibility in manufacturing unique aperture combinations to rope diameters and aperture slot lengths. For example, in some quarry plants in Japan, a 14 aperture screen is used as the bottom deck for their No. 5 spec (20mm to 13mm) or the top deck for the No. 6 spec. The Tufflex specification is an 8mm rope on top and a 6mm rope from hook to hook, a combination not available in traditional woven wire.
Long-slotted apertures, ie 8 x 340mm, are used in some side-tensioned equipment where flexibility of the screening surface is needed. This type of aperture, while possible to weave in wire, would not have the mechanical stability for a vibrating application, whereas Tufflex screens were developed with this in mind. These larger configurations can also be used as an alternative to harp/piano screens.
Get quotation:
TEL:+86-311-80690567
Mobile Phone: +8613383118952 Contact me with WhatsApp
Email : team11@huataolover.com
Address:NO.298 ZHONGHUA NORTH STREET ,XINHUA DISTRICT, Shijiazhuang, China.
Zip:050000
Wechat:13383118952
Website: www.tufflexscreen.com
Welded Tufflex
The aperture shapes of Tufflex Screen are similar to woven wire, square or rectangular, and the construction varies with either fully or partially welded. The aperture range is 1.5mm to 45mm, with a wire rope diameter range from 1.5mm to 12mm, with custom-made rectangular slots as fine as 0.7mm wide.
The poly sheets can be welded on for hot spot impact protection or enhanced abrasion protection along the hooks.
The installation of Tufflex is the same as any cross-tension screen. The hooked edges of the Tufflex allow for fitment into existing tension set-ups without any structural modifications. Centre hold-down holes are easily accommodated.
Tufflex as light, easy to handle and depending on the application possesses a longer wear life than higher tensile woven wire.
The brightly coloured material is lightweight and smooth, which makes it much easier to handle when delivering, storing, installing or removing.
Partially Welded Tufflex
The Tufflex screens, particularly those that are only partially welded and which give off a secondary vibration effect, have the capacity to self-clean, providing the site with the capacity to run all year round. Thus, the cost of the replacement screen isnt the only metric to measure; this site has had a 35 to 40 per cent improvement in production capacity, allowing it to service customers throughout the year.
The Tufflex screening range is available with either square or rectangular apertures of varying sizes. The screens are either welded on every junction, or partially welded at every second intersection. The polyurethane coating provides extended wear life when compared with traditional wire screens, which become worn as aggregate and rocks are compounded over them. The composition of the polyurethane provides some slip for the product to be screened effectively while causing minimal damage to the screening substrate. Depending on the product being screened and the surrounding regional climate, HUATAO Groups extractive team can assist in the selection of the most appropriate Tufflex combination.
OHS is not potentially the first criteria when selecting a screen type but as we all continue to focus on improving the safety of our employees, customer and contractors, the OHS elements of any choice are increasingly important. Tufflex screens are far lighter than their traditional woven wire counterparts. They are usually supply rolled and can be manoeuvred by one person, in sharp contrast to traditional woven wire, which necessitates a forklift, pallet or even boom lift to be lifted on-site. OHS practices may require three points of contact, and therefore moving screens using more than one person, but this task is even safer and easier given the reduced weight of Tufflex.
Cuts and abrasions normally associated with traditional screening media are all but negated; there are no sharp edges caused by cut wires along the edges of screens. Tufflex screens are fully encased in polyurethane, with only the hooks outstanding.
Rectangular Welded Tufflex
Tufflex polyurethane screens come in fully welded, partially welded and rectangular welded variations. The brightly coloured material is lightweight and smooth, which makes it much easier to handle when delivering, storing, installing or removing.
Screening innovation in the past has been limited to tweaks and modifications, slightly different apertures or better hooking. The introduction of Tufflex screens a fe years ago was akin to the introduction of smartphones versus traditional mobile phones. We never really knew we needed a phone with a camera, a GPS and in-built games, but now its hard to imagine life without one.
Just as smartphones cover off the traditional functionality of making phone calls, Tufflex is used for screening product in the quarry market. It offers improved screening efficiency, substantially increased wear life, increased production uptime and occupational health and safety (OHS) benefits due to its light weight and flexibility.
While there are a set range of apertures (1.5mm to 45mm square) to choose from, the Tufflex process has great flexibility in manufacturing unique aperture combinations to rope diameters and aperture slot lengths. For example, in some quarry plants in Japan, a 14 aperture screen is used as the bottom deck for their No. 5 spec (20mm to 13mm) or the top deck for the No. 6 spec. The Tufflex specification is an 8mm rope on top and a 6mm rope from hook to hook, a combination not available in traditional woven wire.
Long-slotted apertures, ie 8 x 340mm, are used in some side-tensioned equipment where flexibility of the screening surface is needed. This type of aperture, while possible to weave in wire, would not have the mechanical stability for a vibrating application, whereas Tufflex screens were developed with this in mind. These larger configurations can also be used as an alternative to harp/piano screens.
Get quotation:
TEL:+86-311-80690567
Mobile Phone: +8618103317488 Contact me with WhatsApp
Email : team91@huataogroup.com
Address:NO.298 ZHONGHUA NORTH STREET ,XINHUA DISTRICT, Shijiazhuang, China.
Zip:050000
Wechat:18103317488
Website: www.tufflexscreen.com
Material : polyurethane coated stainless steel wire rope
Type: fusion welded
Application : quarry shaker
Welded Style : fully or partially welded
Aperture shape :square or rectangular
aperture range : 1.5mm to 45mm
Wire rope diameter range : 1.5mm to 12mm
Featureï¼? wear-resisting, noiseless , light etc
Edgeï¼? hooking and as requests
The Tufflex screens, particularly those that are only partially welded and which give off a secondary vibration effect, have the capacity to self-clean, providing the site with the capacity to run all year round. Thus, the cost of the replacement screen isnt the only metric to measure; this site has had a 35 to 40 per cent improvement in production capacity, allowing it to service customers throughout the year.
The Tufflex screening range is available with either square or rectangular apertures of varying sizes. The screens are either welded on every junction, or partially welded at every second intersection. The polyurethane coating provides extended wear life when compared with traditional wire screens, which become worn as aggregate and rocks are compounded over them. The composition of the polyurethane provides some slip for the product to be screened effectively while causing minimal damage to the screening substrate. Depending on the product being screened and the surrounding regional climate, HUATAO Groups extractive team can assist in the selection of the most appropriate Tufflex combination.
OHS is not potentially the first criteria when selecting a screen type but as we all continue to focus on improving the safety of our employees, customer and contractors, the OHS elements of any choice are increasingly important. Tufflex screens are far lighter than their traditional woven wire counterparts. They are usually supply rolled and can be manoeuvred by one person, in sharp contrast to traditional woven wire, which necessitates a forklift, pallet or even boom lift to be lifted on-site. OHS practices may require three points of contact, and therefore moving screens using more than one person, but this task is even safer and easier given the reduced weight of Tufflex.
Cuts and abrasions normally associated with traditional screening media are all but negated; there are no sharp edges caused by cut wires along the edges of screens. Tufflex screens are fully encased in polyurethane, with only the hooks outstanding.
Get quotation:
TEL:+86-311-80690567
Mobile Phone: +8613315113775 Contact me with WhatsApp
Email : team10@htglover.com
Address:NO.298 ZHONGHUA NORTH STREET ,XINHUA DISTRICT, Shijiazhuang, China.
Zip:050000
Wechat:13315113775
Website: www.tufflexscreen.com
Our main products: 3d panel machine line, EPS machine line, wire mesh welding machine line, automatic expanded metal mesh machine, wire straightening and cutting machine and so on. In addition to the standard specification, we also accept special requirements from our customer, so please come to us if you have the needs.
Advantage:High speed, high matching, high-end models, provide customized, can make the ultimate efficiency, suitable for medium, large, ultra-large jet production companies
Specification:
Model:TOP3400C
Size:63*48*39cm
Net weight:25KG
Gross weight:35KG
Product parameters:
Power:3600W
Voltage:230VF
requency:50/60HZ
Welding thickness:0.2-3mm
Fan:DC Fan,stronger wind,more uniform air
Temperrature ranger:0-700â??
Walk Speedï¼?1-15m/min(20-25/min available)
Auto-dormancy control:protect heating element,make machine lifetime longer
Laser:laser positionning line,more accurate
Handrial:standing to operate,move maching conveniently
Welding width:2-4.5(wheel width 4.8th)
LED light:more convenient work in night
Temperature control:digital temperature control,digital dispaly,temperature float±1â??
Heating element:Top 3400c is Leister heater.
Scope:banner,tent,waterptoof,tarpaulin and so on.
china coal 0001
Introduction of CNC Steel Bar Reinforcing Roll Cage Welding Machine Rebar Machine
The main reinforcement of the hopper cage is automatically fed to the feeder frame through the automatic feeding of the main reinforcement of the hopper frame through the fixed disk catheter and the main reinforcement is fixed on the moving plate catheter via the electric tool. And then move the disk and move the disk synchronously and move the disk in accordance with the pre-set speed (walking speed can be adjusted according to the skilled proficiency of the operator) forward, while welding, and thus Produce finished steel cage.
I steel cage cage equipment to introduce the latest European technology, reinforced cage diameter error can be controlled within 1cm; 1 meter length of the reinforcement cage spacing error can be controlled within 5mm; production efficiency is made of steel cage 3-4 times, equipment Operators only need 3-5 people, the finished product reinforced cage main reinforcement, uniform spacing, solder joints full, solid, can achieve supervision and exemption.
Parameter of CNC Steel Bar Reinforcing Roll Cage Welding Machine Rebar Machine
model XT6-15Automatic XT6-20Automatic XT-6-25 Automatic XT6-40Automatic
Rebar cage maximum diameter (mm) 1500 2000 2500 4000
Rebar cage minimum diameter (mm) 500 500 500 600
Rated power (kw) 18 20 22 30
Average power consumption (kw/h) 8 10 12 18.5
Main rib diameter (mm) 12-32 12-32 12-32 12-32
Stirrup diameter (mm) 6-16 6-16 6-16 6-16
Rebar cage length (mm) 12000-27000 12000-27000 12000-27000 12000-27000
Welding method Manually selectable Manually selectable Manually selectable Manually selectable
Rebar cage maximum weight (kg) â?¤6500 â?¤7500 â?¤8500 â?¤12000
Total weight (kg) 18.0t 19.2t 21.5t 35t
Main frame dimensions (m) 35m*2.2m*3.2m 35m*2.7m*3.3m 35m*3.2m*3.5m 37m*5.2m*5.6m
3219 Welding Wire Mesh Machinery Suppliers
Short on time? Let Welding Wire Mesh Machinery sellers contact you.
