The raw material of the porous titanium plate for hydrogen production by PEM water electrolysis is pure titanium powder, formed by pressing the mold and sintered at high temperature in a vacuum.
Product Parameters
Filtration accuracy: 0.5um-50um
Porosity: 30-40%
Permeability: 3-800m3/m2hkPa
Compressive strength: 2-3Mpa
Temperature resistance: 300â??
Maximum working pressure difference: 0.6Mpa
Features
1. Strong temperature resistance, typical application at temperatures below 300 C;High filtration precision, stable pores, can effectively remove suspended solids and particles, etc., and the purification effect is good;
2. Good air permeability and low pressure loss. High porosity, uniform pore size, low initial resistance;
3. Easy to blow back, can be regenerated online, easy to clean, strong regeneration ability, long service life;
4. High mechanical strength, good rigidity, good plasticity, no need for additional skeleton support protection, easy to install and use;
5. Easy maintenance, good assembly, can be welded, bonded and machined;
6. Uniform pores, especially suitable for occasions requiring high uniformity such as fluid distribution and homogenization treatment;
7. Good corrosion resistance, can be used in nitric acid, sulfuric acid, acetic acid, oxalic acid, phosphoric acid, 5% hydrochloric acid, molten sodium. Stable use in liquid hydrogen, liquid nitrogen, hydrogen sulfide, acetylene, water vapor, hydrogen, carbon dioxide gas and other environments.
Product Introduction
In a proton exchange membrane fuel cell, the main function of the gas diffusion layer is to support the catalyst and provide a channel for the gas participating in the reaction and the water generated. It is one of the key components of the membrane electrode.
The porous titanium plate has a good and uniform large number of pores, the porosity can be controlled by adjusting the diameter of the powder, and it is made of sintering, high-temperature resistance, and corrosion resistance.
Product Parameters
Color: Metallic
Shape: Square plate, disc, can be customized
Process: Powder sintering
Fine filter: 1 m~65m
Material: Pure titanium
Operating Temperature: 300
Thickness: 0.8mm 2.8mm
Performance: Acid resistance, alkali resistance, high-temperature resistance, breathable
Features
1. Corrosion resistance
2. Porous air permeability
3. High conductivity
4. High thermal conductivity
5. Good permeability
Due to its characteristics, porous titanium plates can also be used in the following industries:
(1) Manufacture of sweating material. That is, the pores of ordinary powder metallurgy materials are impregnated with low-melting point substances, and they work at high temperatures
At this time, the impregnation melts and seeps out, making the material sweat to dissipate heat. In this way, ordinary materials can be used to replace expensive heat-resistant alloys, and the service temperature of heat-resistant parts can be further increased.
(2) Manufacture filter material. Used to filter gas, filtrate and poison, etc.
(3) Impregnated with anti-friction agent to manufacture oil-containing and oil-free lubricated bearings; impregnated with spices to manufacture fragrance-containing handicrafts, etc.
(4) Manufacture materials such as vibration reduction, noise reduction, and heat insulation.
The production of PTL (porous titanium sintered plate) is a key component in the manufacture of hydrogen production electrolyzers. PTL is a type of electrode material that is used to catalyze the reaction that produces hydrogen gas from water.
The parameters of PTL (porous titanium sintered plate) used in hydrogen production electrolyzers can vary depending on the specific application and design of the electrolyzer. However, some common parameters for PTL porous titanium sintered plates used in hydrogen production electrolyzers include:
1.Porosity: The porosity of the PTL porous titanium sintered plate is an important parameter that determines the surface area available for the hydrogen production reaction. Typically, PTL plates have a porosity of around 30-50%, which provides a large surface area for efficient hydrogen production.
2.Pore size: The size of the pores in the PTL plate can also affect the efficiency of the hydrogen production reaction. Generally, PTL plates have pore sizes ranging from 1um to 100um, depending on the specific application.
3.Thickness: The thickness of the PTL plate can vary depending on the design of the hydrogen production electrolyzer. TopTiTech can customized the thickness from 1mm to 3mm.
4.Catalyst loading: The amount and type of catalyst material used to coat the PTL plate can also affect the efficiency of the hydrogen production reaction. Typically, platinum or iridium catalysts are used, with loading levels ranging from a few micrograms per square centimeter to several milligrams per square centimeter.
Pure titanium ingots and alloy ingots are both found in titanium ingots, which are made by melting and casting mostly titanium sponges. Due to their uniform composition, consistent quality, and availability of large-sized ingots, large-sized pure titanium ingots, which are generated using electron beam melting, in particular, significantly contribute to advances in product quality and productivity.
Titanium ingot can be used in consumer goods, medical implants, artificial bones, ship hulls, bridges, chemical equipment parts (reactors, pipelines, heat exchangers, and valves, among other things), aviation engines and parts, and chemical equipment.
Products information
Titanium and titanium alloy ingot is the product name.
Size: 380mm-960mm (15"-37.8") in diameter, 2000mm-3000mm in length (78.7"-118")
Material: Grades 1, 2, 4, 5, 7, 9, and 12
Standard: AMS 4928Q, ASME B348, ASTM F136, and ASTM F67
Surface: Purity when polished: 99.95%-99.999%
Point of melting: 1660 C
Products Description
1. Uniform composition;
2. Consistent quality;
3. Availability of large-sized.
Package and Shipment
1. Titanium Plate Sintered Filters are usually packed in cartons, wrapped in soft film, fixed in the box filled with industrial foam cotton, and the outer baler is packed with plastic bags no damage during transportation.
2. Wooden box export packaging can also be customized. The foam cotton can be filled and fixed, the external box is sealed, the bottom is specified, and the whole packaging is processed, and the goods can be delivered to the designated place of the customer without damage.
Product Introduction
Porous titanium foam sintered plate is also called metal powder sintered porous microporous filter material. It is a new type of deep separation and fine filter element made of spherical or irregular metal or alloy powder, which is mixed, pressed, and sintered by powder metallurgy.
Porous titanium foam sintered plate is a versatile and effective material in the field of heat transfer and heat dissipation. Its high thermal conductivity, resistance to corrosion and oxidation, low weight, and high strength make it a popular choice for a wide range of applications across various industries
1. The material has different pore sizes and filtration precision, the channels are criss-crossed, and the filtration and separation efficiency is high.
2. High temperature resistance and short heat resistance. Suitable for use in the temperature range of 300�°C.
3. Anti-corrosion. It is suitable for deep separation and fine filtration of corrosive media such as acid and alkali.
Application range
Petroleum, chemical industry, metallurgy, aviation, electronics, electric power, pharmaceuticals, environmental protection, atomic energy, nuclear industry, natural gas, refractory materials, fire-combat equipment, etc.
Package and Shipment
1. Titanium Plate Sintered Filters are usually packed in cartons, wrapped in soft film, fixed in the box filled with industrial foam cotton, and the outer baler is packed with plastic bags no damage during transportation.
2. Wooden box export packaging can also be customized. The foam cotton can be filled and fixed, the external box is sealed, the bottom is specified, and the whole packaging is processed, and the goods can be delivered to the designated place of the customer without damage.
3128 Titanium Products Suppliers
Short on time? Let Titanium Products sellers contact you.
The microporous titanium powder sintered corrugated plate is made of titanium powder after forming and sintering at high temperature, so the surface particles are not easy to fall off; the service temperature in the air can reach 300C; it is suitable for filtering various corrosive media, such as weak hydrochloric acid , sulfuric acid, hydroxide, seawater, aqua regia and chloride solutions such as iron, copper and sodium.
Product Usage
1. Used for matching with stainless steel or titanium filterï¼?
2. Orifice plate material for gas distribution fluidized bedï¼?
3. Filtration, washing and drying of materials in the pharmaceutical industryï¼?
4. Precise filtration of various hydraulic oils and lubricating oils in the machinery industry
5. Filtration of high-temperature corrosive wastewater in the petrochemical industry
6. Recovery of catalyst in catalyst filter
7. High temperature protection facilities on textile instruments and equipment
8. The electrolysis electrode on the hydrogen production device.
Product advantages
Because the microporous titanium powder sintered corrugated plate has overall heating, no heating inertia, and selective heating, the temperature of the material surface, interior and central area is balanced, the crystal particles are evenly heated, the temperature difference between each part is small, the overall internal structure of the material is relatively complete, and the performance is better. excellent.
Production Process
The microporous titanium powder sintered corrugated plate is made by adding high-purity powder into the rolling mill and rolling under pressure. After being rolled and formed by the rolling mill, it is sintered at high temperature in a vacuum sintering furnace.
Note: 1. During the rolling process, the pressure of the rolling mill is very important, which affects the air permeability of the board. Yinggao has the personnel to carry out pressure rolling to ensure the air permeability is qualified.
2. The sintering time in the vacuum sintering process affects the service life of the board, so sufficient and appropriate sintering time is the key process of the sintering process.
B. Specifications of titanium wire for glasses: 1.0 6.0mm
C. Specifications of titanium wire: 8.0mm (special for hangers)
D. Welding wire specification: 2.0mm, 2.5mm, 3.0mm
Surface: pickled, bright
Features: light weight, corrosion resistance, high strength, good heat resistance, good ductility, non-toxic, non-magnetic, excellent mechanical strength, etc.
GR1 Titanium mesh from TopTiTech is produced by weaving pure titanium wire, so it is also called titanium mesh. According to the surface of the raw material, titanium mesh (or titanium wire mesh) can be classified into black and bright varieties. The black titanium mesh is made of pure titanium wire with graphite emulsion coating on the surface, which is suitable for ship filtration and manufacturing seawater filtration titanium mesh.
The graphite emulsion coating of GR1 titanium mesh from TopTiTechis removed before weaving pure titanium wire into the net. It is suitable for manufacturing electrode nets, titanium battery current collection nets, and fine chemical liquid filter titanium nets.
Product parameters
Material: GR1, GR2
Production process: plain weave
Filter hole type: square
Filtration accuracy: 0.02mm-50mm
Width: 5mmâ??3000mm
Titanium mesh use: chemical filtration, fuel cell anode titanium current collector, electrolyzer anode mesh
Products classification
1. Pure titanium wire Tiâ?¥99.6%, black surface, black titanium mesh is suitable for seawater filtration and other industries where the purity of the solution is not high.
2. High-purity titanium wire: the surface is bright without oxidation layer, and the bright titanium mesh is suitable for manufacturing titanium electrode mesh and chemical titanium filter mesh.
What are the advantages about Ti?
Titanium has excellent qualities such as light specific gravity, high strength, low temperature resistance and corrosion resistance, and is not easy to oxidize. It has the reputation of strategic metal and the most valuable metal in the 21st century. It is extensively utilized in a variety of industries, including aircraft, shipbuilding, the military, chemical machinery, electric power, seawater desalination, and medical equipment. It has an important position and role in the development of the national economy. It can also be used in high-temperature electric furnace, mining, petroleum, chemical, food, medicine, machinery manufacturing and other industries.
Products application
Performance and application of titanium mesh: Titanium mesh has good corrosion resistance in acidic and alkaline solutions, and is used to manufacture titanium filter mesh, titanium anode mesh, ion membrane electrolyzer electrode mesh and other products. Titanium mesh has strong corrosion resistance in seawater.
Pure titanium aeration head is a kind of advanced sewage treatment equipment parts made by international advanced technology. The main part of the pure titanium aeration head is made of industrial pure titanium powder as the main raw material, and molds of different styles and sizes are customized according to customer needs. After the titanium powder is pressurized and formed, it is sintered in high temperature vacuum, and finally the connection interface is put into use.
The pure titanium aeration head produced by TopTiTech has uniform structure, small aeration bubble diameter, high aeration efficiency, convenient installation, low energy consumption, and corrosion resistance. It is widely used in sewage treatment, industrial organic wastewater treatment, and oxidation pool equipment. and biofilters, etc.
Specification
1. spherical aerator head
Bottom diameter: 150mm-200mm
2. Flat aerator head
Diameter: 100mm-300mm
3. Tube aerator head
Diameter: 14mm-80mm
Length: 10mm-1000mm
What are the features?
1. The aeration aperture is fine and uniform, and the efficiency is high;
2. The air bubbles diffuse evenly, and there will be no clogging of pores;
3. High temperature resistance and corrosion resistance;
4. Fast oxygenation speed;
5. Washable and reusable;
6. Customizable.
How does titanium aeration head work?
Aeration is mainly used in sewage biological treatment
In the sewage treatment tank, the porous pure titanium aeration head can greatly increase the oxygen content in the sewage, thereby satisfying the activity of microorganisms that adsorb sewage impurities and increasing the sewage treatment rate.
Whether it is the treatment and purification of urban sewage, industrial sewage, etc., it is inseparable from the use of pure titanium aerators.
Pure titanium aeration head is a kind of advanced sewage treatment equipment parts made by international advanced technology. The main part of the pure titanium aeration head is made of industrial pure titanium powder as the main raw material, and molds of different styles and sizes are customized according to customer needs. After the titanium powder is pressurized and formed, it is sintered in high temperature vacuum, and finally the connection interface is put into use.
The pure titanium aeration head produced by TopTiTech has uniform structure, small aeration bubble diameter, high aeration efficiency, convenient installation, low energy consumption, and corrosion resistance. It is widely used in sewage treatment, industrial organic wastewater treatment, and oxidation pool equipment. and biofilters, etc.
Specification
1. spherical aerator head
Bottom diameter: 150mm-200mm
2. Flat aerator head
Diameter: 100mm-300mm
3. Tube aerator head
Diameter: 14mm-80mm
Length: 10mm-1000mm
What are the features?
1. The aeration aperture is fine and uniform, and the efficiency is high;
2. The air bubbles diffuse evenly, and there will be no clogging of pores;
3. High temperature resistance and corrosion resistance;
4. Fast oxygenation speed;
5. Washable and reusable;
6. Customizable.
How does titanium aeration head work?
Aeration is mainly used in sewage biological treatment
In the sewage treatment tank, the porous pure titanium aeration head can greatly increase the oxygen content in the sewage, thereby satisfying the activity of microorganisms that adsorb sewage impurities and increasing the sewage treatment rate.
Whether it is the treatment and purification of urban sewage, industrial sewage, etc., it is inseparable from the use of pure titanium aerators.
Pure titanium aeration head is a kind of advanced sewage treatment equipment parts made by international advanced technology. The main part of the pure titanium aeration head is made of industrial pure titanium powder as the main raw material, and molds of different styles and sizes are customized according to customer needs. After the titanium powder is pressurized and formed, it is sintered in high temperature vacuum, and finally the connection interface is put into use.
The pure titanium aeration head produced by TopTiTech has uniform structure, small aeration bubble diameter, high aeration efficiency, convenient installation, low energy consumption, and corrosion resistance. It is widely used in sewage treatment, industrial organic wastewater treatment, and oxidation pool equipment. and biofilters, etc.
Specification
1. spherical aerator head
Bottom diameter: 150mm-200mm
2. Flat aerator head
Diameter: 100mm-300mm
3. Tube aerator head
Diameter: 14mm-80mm
Length: 10mm-1000mm
What are the features?
1. The aeration aperture is fine and uniform, and the efficiency is high;
2. The air bubbles diffuse evenly, and there will be no clogging of pores;
3. High temperature resistance and corrosion resistance;
4. Fast oxygenation speed;
5. Washable and reusable;
6. Customizable.
How does titanium aeration head work?
Aeration is mainly used in sewage biological treatment
In the sewage treatment tank, the porous pure titanium aeration head can greatly increase the oxygen content in the sewage, thereby satisfying the activity of microorganisms that adsorb sewage impurities and increasing the sewage treatment rate.
Whether it is the treatment and purification of urban sewage, industrial sewage, etc., it is inseparable from the use of pure titanium aerators.
1. Foil refers to any metal sheet with a thickness of 0.2mm or less. Heavy gauge foil, medium gauge foil, and light gauge foil are categorized according to the thickness of the metal foil.
2. The thickness ranges from 0.2mm to 0.1mm for heavy gauge foil, 0.1mm to 0.09mm for medium gauge foil, and 0.001mm for light gauge foil.
Enterprise advantage: The company has advanced equipment, including high-precision machining equipment such as five-axis and four-axis CNC machining centers, three-axis machining centers, coordinate measuring machines, etc. We cut and complement products according to customers' drawings and strictly control the quality of each production process to ensure that all delivered products are 100% consistent with the drawings and are high-quality and highly precise. In order to assist in the development of customized products, the company has established a team responsible for supervising, communication, and continuous optimization to improve product performance and quality. We have more than 20 technical, technological and operational employees who have been engaged in the production and processing of titanium industry for 20 years. We can provide customized solutions and accept new product development according to the drawings, sample and requirements provided by customers.
Titanium machining parts, with titanium standard parts grades ofï¼? TA1, TA2, TC4, GR1, GR2, GR5, GR9, GR23 etc. of �±, �², �± + �² titanium and titanium alloy materials.
Standard: DIN, BG, ISO, BSW, UNC titanium and titanium alloy non-standard fasteners, machining according to the drawings.
Titanium bike,Titanium bicycle,accessories Frame, front fork, rear fork, grip, handle, pedal, flywheel, transmission
Applicable scenes: chemical equipment, medical parts, home appliance parts, photographic equipment, automobile and motorcycle parts, electronics factory, powder metallurgy, photoelectric technology, home accessories, food machinery.
Delivery time: 7-30 days (or as negotiated by both sides for highly customized products)
Surface treatment: galvanization, chrome plating, black oxidization, anodic oxidation, sandblasting, painting treatment according to different materials and different requirements
Minimum order quantity: 10 pieces
Payment method: L/C, D/P, T/T
Mode of shipment: air, sea, express, etc.
Enterprise advantage: The company has advanced equipment, including high-precision machining equipment such as five-axis and four-axis CNC machining centers, three-axis machining centers, coordinate measuring machines, etc. We cut and complement products according to customers' drawings and strictly control the quality of each production process to ensure that all delivered products are 100% consistent with the drawings and are high-quality and highly precise. In order to assist in the development of customized products, the company has established a team responsible for supervising, communication, and continuous optimization to improve product performance and quality. We have more than 20 technical, technological and operational employees who have been engaged in the production and processing of titanium industry for 20 years. We can provide customized solutions and accept new product development according to the drawings, sample and requirements provided by customers.
Titanium machining parts, with titanium standard parts grades ofï¼? TA1, TA2, TC4, GR1, GR2, GR5, GR9, GR23 etc. of �±, �², �± + �² titanium and titanium alloy materials.
Standard: DIN, BG, ISO, BSW, UNC titanium and titanium alloy non-standard fasteners, machining according to the drawings.
Titanium nuts: Hexagon nuts, self-locking nuts, ring nuts, knurled nuts, slotted nuts, hexagon nuts for precision machinery, and abnormally shaped non-standard nuts
Processing method: as required by customers. Undertake the production of titanium processing parts, titanium alloy processing parts, titanium standard parts, titanium non-standard parts, drawing and material provided, square, disc type, long type, regular or irregular shaped processing parts, etc.
Applicable scenes: chemical equipment, medical parts, home appliance parts, photographic equipment, automobile and motorcycle parts, electronics factory, powder metallurgy, photoelectric technology, home accessories, food machinery.
Delivery time: 7-30 days (or as negotiated by both sides for highly customized products)
Surface treatment: galvanization, chrome plating, black oxidization, anodic oxidation, sandblasting, painting treatment according to different materials and different requirements
Minimum order quantity: 10 pieces
Payment method: L/C, D/P, T/T
Mode of shipment: air, sea, express, etc.
Low resistance
Highly smooth
Incompressible
Hydrogen generator applicable or other applications
Application area of GR1 Titanium felt :
1. Petrochemical industry: terminal filtration of petroleum products and chemical carbon-alkali liquid filtration, organic solution filtration of alcohol, heavy coking device gas oil filtration, hydrogenation and cracking cycle oil filtration.
2.� Fly ash filter in coal chemical industry.
3. Elimination and miscellaneous filtration of API in the pharmaceutical and chemical industry, decarbonization, discolouration and filtration and precision filtration of pharmaceutical intermediates, filtration and separation of a precious metal catalyst, and purification and filtration of catalytic gas.
4.� Removing mechanical impurities in the water treatment industry, water purification, ozone sterilization after filtration and ozone aeration.
Smooth surface, good uniformity, high air permeability, strong bonding force,
The electrolytic performance is stable, the resistance is small, the energy consumption is low, and the pores form a three-dimensional structure.
Why Choose Us?
We have more than 11 years of experience with Porous material and Sintering filters. We are a� typical� � China supplier. We are professionally exporting under the standards of ASTM, GB, and ISO. Now we have gained close cooperation with clients from Korea, Iran, Europe, India, and America, and won good comments from users.
We appreciate your interest in our company very much and hope that our website will be helpful and informative to you.
If you need more information about our product: titanium felt, please contact our sales department, tell us your requirement. we will do our best to reply to you ASAP.
Porous Titanium Sheet is made of high purity titanium powder with a uniform aperture, flat and no rag, and minimum filtration accuracy up to 0.5 microns.
Porous Titanium Sheet is used in the following aspects
1. Corrosion resistance, acid, and alkali resistant environment.
2. High-temperature resistance, temperature resistance of 300 degrees.
3. It can be accurately filtered and intercept 98% as small as 0.5-micron particles.
4. Sharable and can be customized according to customer specifications.
5. It can be reused and used again after cleaning, doubling the service life.
Application
1. Petrochemical industry, water filtration, water purification.
2. Pharmaceutical industry, pharmaceutical, and liquid filtration.
3. Hydrogen production industry, hydrogen energy electrolytic electrode.
4. Gas purification industry, as a gas purification sieve.
Titanium felt is a soft material made of pure titanium fibers, which can be used in electrolytic cells as an electrode.
The process is that the titanium wire is made into micron-scale fibers through a special process, and the titanium fibers are laid and sintered to make porous materials. Its unique three-dimensional network fibers and fully connected pore structure make it have a series of special functions.
In the application of hydrogen production, under the condition of normal pressure of 60 , titanium felt has the best electrolytic performance, the most suitable pore size, the best air permeability and porosity. The test data show that titanium felt is better than titanium plate and carbon paper.
Our company produces titanium sponge, we are the largest producer in and one of the largest producers worldwide. Currently, we are increasing our capacity of production from 15,000MT to 80,000MT per month.
Anodes in a water heater are divided into sacrificial anode rods and titanium anode rods. A sacrificial anode rod is an exposed metal rod that is inserted into the water heater. It is designed to corrode slowly over time. The sacrificial anode is made from either magnesium, aluminum, or zinc. The lifespan of sacrificial anodes varies greatly based on local water conditions and quality. Annual inspection and replacement for sacrificial anode rods are recommended. In areas with sulfides in the water, there is a reaction with magnesium anodes which creates hydrogen sulfide gas that creates a rotten egg smell in the water. In areas with high conductivity water, aluminum anodes are depleted too quickly, leaving the tank unprotected.
3128 Titanium Products Suppliers
Short on time? Let Titanium Products sellers contact you.
