Find Verified Stainless Steel Coils Suppliers, Manufacturers and Wholesalers

100 * 100 100 * 150 100 * 200 100 * 300 200 * 300 300 * 400 400 * 600 500 * 500 1000 * 1000 1000 * 2000 and so on. Not only the above models, we can make according to customer needs, from a variety of different pretreatment options. Used for Coatings R&D;Materials R&D; Product Qualifications;Plant Audits;Material Compatibility.

Stainless Steel Products on discount! Steel Grade 304
Stock is in UAE local buyers can contact us Stainless Steel Coils and Sheets

(1) Grade 301 Good ductility, used for molded products. It can also be hardened by mechanical processing. Good weldability. Wear resistance and fatigue strength are better than grade 304 stainless steel, used in products such as springs, steel structures, wheel covers.

(2) Grade 302:The corrosion resistance is the same as grade 304, and the strength is better due to the relatively high carbon content.

(3) Grade 303:It is easier to cut than grade 304 by adding a small amount of sulfur and phosphorus.

(4) Grade 304: It is a stainless steel that is non-magnetic and cannot be changed by heat treatment. The standard composition is 18 % chromium plus 8 % nickel. Used in products such as: corrosion-resistant containers, tableware, furniture, railings, medical equipment, some mobile phone frames.

(5) Grade 304L:It has the same characteristics as grade 304, but with low carbon, it is more resistant to corrosion and easy to heat treatment, but has poor mechanical properties. It is suitable for welding and products that are not easy to heat treatment.

(6) Grade 304N:With the same characteristics as grade 304, it is a nitrogen-containing stainless steel. Nitrogen is added to increase the strength of the steel.

(7) Grade 309:Better temperature resistance than grade 304.

(8) Grade 309S:With a large amount of chromium and nickel, it has good heat resistance and oxidation resistance, and is used in products such as heat exchangers, boiler components, and jet engines.

(9) Grade 310S:Contains the most chromium and nickel, so it has the best heat resistance and oxidation resistance. It is used in products such as heat exchangers, boiler components, and electrical equipment.

(10) Grade 316: After grade 304, the second most widely used steel grade, mainly used in the food industry and surgical equipment, the addition of molybdenum gives it a special structure that is resistant to corrosion. Because of its better resistance to chloride corrosion than grade 304, it is also used as "marine steel". SS316 is usually used in nuclear fuel recovery units. Grade 18/10 stainless steels generally also meet this application level. Especially used in chemical, seaside and other corrosive environments, ship assembly, building materials.

(11) Grade 316 L: Low carbon, so it is more resistant to corrosion and easy to heat treatment. It is used in products such as chemical processing equipment, nuclear power generators, and refrigerant storage tanks.

(12) Grade 321:Similar to grade 304, except that the risk of corrosion of the material weld is reduced due to the addition of titanium elements, suitable for welding. Used in products such as brewing equipment, steam pipes, aerospace parts.

(13) Grade 347 The stabilizing element niobium is added and is mainly used for welded parts used at high temperatures.

We are a well established organization engaged in offering an outstanding range of Stainless Steel Ring to our valued patrons. Best quality stainless steel is used to manufacture these products. The range of products is manufactured using modern machines, at our vendorsâ?? base. Appreciated for their lastingness, corrosion resistance and high strength, this product is widely demanded in the national as well as international market. We are able to offer this product to our customers in perfect packaging

Being a reckoned name, we are engaged in manufacturing and supplying Stainless Steel Patta. These products are manufactured at our workplace with the help of advanced machinery. Owing to their accurate dimensions and sturdy design, these products are availed by a huge client base. Our customers can make use of these products in construction applications.
Stainless Steel Circles:- 304/L/H/LN, 316/L/H/LN/Ti, 317L, 321/H, 347/H, 309, 310, 904L. 409/L, 410, 430/Ti, 436, 439.

CONTENTS SPECIFICATIONS
Base Metal Cold Rolled, Galvanised, Aluminium zinc Alloy, Stainless Steel and Aluminium
Thickness - TCT 0.18 to 1.25 mm *
Width 600 to 1500 mm
Coil ID 508 and 610 mm

Example: 304 coil, 1219mm*1.0mm(thickness), 20 tons, 20ft container, FOB. Final price: $3100--$3200,USD

550mm 1mm thickness coils 3 tons/ coils, $1500/tons, $4500/coil.
FOB, CIF

* This product has a painted finish that is uniform in colour, gloss, texture & thickness, with excellent paint adhesion and durability. Coils can be readily rollformed, bent, pressed, cut, drilled, lock-seamed and stamped without degradation in the quality of the paint

CONSTRUCTION
Cladding/siding, Roofing, Sliding shutter, Building accessories, Doors, Partitions, Canopies of gas stations, False ceiling, Prefabricated buildings, Sandwich panels, Bill boards

HOUSEHOLD APPLIANCES
Washing (washing machine & tumble dryer), Cooking (oven & microwave oven), Cold (Refrigerator, freezer, visi cooler, water cooler), Electric Application (griller, toaster, air conditioner)

TRANSPORT
Railway carriages, Bus-body building, Lorrycintainers, License plate, Dash boards, Road signs

INDUSTRY / MISCELLANEOUS
Containers, Packaging, Aerosol, Clock Dials, Furniture, Light Fixtures, Cooking Utensils, Computer & Peripherals.

SS Coils

Cold rolling coil
Steel brand: Q235, Q195, Q195L, Q195LD, 08AL, SPCC
Thickness: 0.18mm-3.0mm
Width: 0-780mm
Width tolerance: different as per different width
Thickness tolerance: different as per different thickness
Hardness of steel coil: >95HV (softened and hardened we can offer)
Weight: 3-9MT/C (or according to the customerí»s requirement)
Surface: General, Bright, Dull and Mirror finish, oiled or unoiled
Packing: Standard exporting packing with edge protector, steel hoop and seals, or as per customer's requirements


Cold rolling coil
Steel brand: Q235, Q195, Q195L, Q195LD, 08AL, SPCC
Thickness: 0.18mm-3.0mm
Width: 0-780mm
Width tolerance: different as per different width
Thickness tolerance: different as per different thickness
Hardness of steel coil: >95HV (softened and hardened we can offer)
Weight: 3-9MT/C (or according to the customerí»s requirement)
Surface: General, Bright, Dull and Mirror finish, oiled or unoiled
Packing: Standard exporting packing with edge protector, steel hoop and seals, or as per customer's requirements

J series of 201 stainless steel | J1, J2, J3, J4, J5
J1: The carbon content is slightly higher than J4, and the copper content is lower than J4. Its processing performance is not as good as J4 material. It is suitable for ordinary shallow deep drawing and large angle deep drawing products such as decorative panels, bathroom products, sinks, and product pipes.

J2, J5: Decorative tubes are easy to process, high hardness (both above 96�°), polished and beautiful, but they are easy to burst when used for square tubes or curved tubes (90�°).

In terms of flat panel, due to its high hardness, the surface of the panel is more beautiful, and surface treatment such as frosting, polishing, and color plating can be carried out. But the biggest problem is bending, bending is easy to break, planing is easy to burst, so the ductility is not good.

J3: High carbon, low chromium and low copper, but because of its high carbon content and low copper content, the material is slightly harder, so it is not suitable for bending with a slightly stronger strength. Compared with 201 stainless steel J1 material, the ductility is not so good, and it is easier to rust in the same environment.

201 stainless steel coil

In the field of narrow bands, the emergence of 201 stainless steel J3 can better meet the requirements of pipe manufacturers for corrosion resistance and deformation. Because it can reduce the cost of raw materials for pipe manufacturers, it is sought after by pipe manufacturers in the narrowband field.

J3 material is easy to process in veneer, but not difficult. The master of the processing factory said that he used J3 material to bend the board, and there would be an inner seam after it was broken (for black titanium, color board series, sanding board, when it is broken apart, there will be an inner seam when folding). The material of the sink has been bent 90 degrees, and it will not work if it continues.

J4: The material of J4 is a relatively high-end variety in the J series of 201 stainless steel. It is suitable for deep drawing products with small angles. Most of the products that need deep drawing and salt spray test will choose it. Such as sinks, kitchen utensils, bathroom products, kettles, thermos cups, door hinges, pots, etc.

316Ti stainless steel is an austenitic stainless steel that is stabilized with titanium, which provides improved resistance to corrosion in high-temperature environments. Compared to standard 316 stainless steel, 316Ti contains a small amount of titanium, which stabilizes the material and prevents sensitization to intergranular corrosion.
The addition of titanium also enhances the material's resistance to pitting and crevice corrosion in chloride-containing environments, making it suitable for use in chemical processing, pharmaceuticals, and power generation applications.
316Ti stainless steel has excellent mechanical properties and is easily formable, which allows it to be used in a wide range of applications. It can be welded using common welding techniques, and is often used to fabricate complex shapes and components.
Some of the key properties of 316Ti stainless steel include:
Corrosion resistance: 316Ti offers superior resistance to pitting, crevice corrosion, and intergranular corrosion in chloride-containing environments.
High-temperature resistance: 316Ti can withstand high temperatures and thermal cycling without losing its corrosion resistance properties.
Strength and toughness: 316Ti offers good strength and toughness, making it suitable for use in demanding applications.
: 316Ti is easily formable using standard methods, and can be welded using common welding techniques.
Overall, 316Ti stainless steel is a reliable and versatile material that is well-suited for use in a range of applications where high-temperature corrosion resistance and mechanical strength are required.
American Standard: ASTM A240/A240M-20a
European Standard: EN 10088-2:2005
Japanese Standard: JIS G4304-2005
Chinese Standard: GB/T 3280-2015
Here are some of the most common international standards for 316Ti stainless steel:
ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM A276/A276M: Standard Specification for Stainless Steel Bars and Shapes
ASTM A312/A312M: Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
ASTM A479/A479M: Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
EN 10088-2: Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
JIS G4304: Hot-rolled stainless steel plate, sheet and strip
GB/T 3280: Cold rolled stainless steel plate, sheet and strip

1) Equipment resistant to sulfuric acid, phosphoric acid, acetic acid, acetic acid;
2) petrochemical;
3) Electromechanical hardware;
4) shipyard;
5) Power plants;

410 stainless steel is a stainless steel grade produced in accordance with American ASTM standards, which is equivalent to 1Cr13 stainless steel, S41000 (American AISI, ASTM). 0.15% carbon, 13% chromium, 410 stainless steel: good corrosion resistance, machinability, general purpose blades, valves. 410 stainless steel heat treatment: solution treatment (�¢??) 800-900 slow cooling or 750 fast cooling.Features: high strength; excellent machinability; hardening after heat treatment; magnetic; not suitable for harsh corrosive environments.
410 stainless steel is a type of martensitic stainless steel that contains 11.5-13.5% chromium and has excellent corrosion resistance, high strength, and hardness. It is a magnetic material and can be hardened through heat treatment, making it suitable for use in various applications that require high strength and corrosion resistance.
Some of the key properties of 410 stainless steel include:
Corrosion resistance: 410 stainless steel is highly resistant to corrosion, including water, steam, and chemical environments. However, it is not suitable for use in highly acidic or alkaline environments.
Hardness: 410 stainless steel has high hardness and strength, making it suitable for use in applications that require wear and abrasion resistance.
Heat treatability: 410 stainless steel can be hardened through heat treatment, allowing for improved strength and hardness.
Magnetic properties: 410 stainless steel is magnetic and can be used in applications that require magnetic properties.
Some of the common applications for 410 stainless steel include:
Cutlery and kitchen utensils Valve components and pump parts Bolts, nuts, and screws Springs and bearings Medical instruments and dental tools Oil and gas equipment
Overall, 410 stainless steel is a highly versatile material that is well-suited for use in various applications where high strength, corrosion resistance, and hardness are required.
Here are some of the most common international standards for 410 stainless steel:
ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM A276: Standard Specification for Stainless Steel Bars and Shapes
ASTM A479/A479M: Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
EN 10088-3: Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
JIS G4303: Stainless steel bars
GB/T 1220: Stainless steel bars

We can provide the following the form:410 stainless steel coil; 410 stainless stee strip;410 stainless stee plate; 410 stainless steel sheets; 410 stainless steel tubes; 410 stainless steel pipe;410 stainless steel flat; 410 stainless steel bar

General blades, mechanical parts, tableware class 1 (spoon, fork, knife, etc.).