Stabilizer 770 Chemical Name Bis(2,2,6,6-tetramethyl-4-piperidyl)sebaceate
Features and Application
With better effects than other most frequently used light stabilizers,blended with antioxidant,providing heat stability,working well with UV Absorber. Wide used in PP,HDPE,PU,PS,ABS etc.
PRODUCT DESCRIPTION
___________________________________________
Ice cream stabilizer is a compound ingredient including food emulsifiers and stabilizers. All the ingredients are based on raw materials of non-animal origin.
USAGE INFORMATION
____________________________________________
The dosage is 0.5%
Mix the milk, sugar and others materials with emulsifying stabilizer as the ratio, dissolved with water, stirring and heating. Then, heat to 75-80â?? and hold 20-30 minutes. And then homogenized, put them into the aging cylinder for 2-3 hours, then, adjust the color and odor.
LEGAL DECLARATION
_______________________________________________
Ice cream stabilizer
INGREDIENT LIST
FEATURES
Power Rating500VA-10KVA / 5KVA-45KVA
Power Factor0.8
Reset SwitchManual Reset Switch
Bypass SwitchManual Bypass Switch For 3 KVA - 60 KVA, OPTIONAL
IndicatorInput/Output Voltage (OPTION: VOLTMETER, NIXIE TUBE, LED, LCD)
Operating Temperature0 ~ 40 C
Relative Humidity0 - 90%
MAIN TECHNICAL INDEX : SERVO SYSTEM(MICROPROCESSOR CONTROL FOR LCD TYPE)
Voltage Regulatotion SystemServo Motor System
Input Regulation System220V+15%/-25%(160-250V), 1 Phase (100V, 110V Option)
Output Voltage Regulation220V+/-3%, 1 Phase (100V, 110V Option)
Frequency50 Hz +/-5%
EfficiencyBetter than 95% at full load, 198-220V input voltage
Electric Appliance1500v/min no flashing nor puncture
Insulation Resistancemore than 2M Ohm
Output Wave FormSine wave (Synchronize with input wave form)
Output Wave Form DistortionNo additional distortion
Harmonic DistortionLess Than 0.5%
Response TimeLess than 1 second (the input votlage changed 10%)
PROTECTION SYSTEM (OPTIONAL)
Surge ProtectionAutomatic shutdown
Overlaod ProtectionCircuit breaker or Fuse
Time Delay- Short time delay: 5 seconds ± 2 seconds
- Long time delay: 5 minutes ± 2 minutes
Automatic Shutdown- Output voltage out of limits: 245±5V, Manual Reset
- Output voltage out of limits: 185±5V, Automatic Reset
- AC voltage flicker
- Output Short Circuit
- Phase fault
- Power failure or Interruption
- Power semiconductor failure
OTHER
Acoustic NoiseLess than 40dB
Warranty periodOne year (for free) from the date of B/L. Free product accessories will be sent to you and save your maintain cost
ApplicationOffice equipment, test equipment, medical equipment, industrial automation equipment, household appliance,lighting system, communication system, etc
Chemical name : bis(2, 2, 6, 6-tetramethyl-4-piperidyl) sebacate
Molecular formula : c28h52o4n2
Molecular weight : 480.74
Cas no : 52829-07-9
Physical and chemical properties :
Appearance and behavior : white crystalline power or granules , odorless
Melting/freezing temperature : 80~86¡æ
Transmittance : 425nm¡ý98.0% ; 500nm¡ý99.0%
Solubility (g/100g solvent , 20¡æ)
Solvent
Acetone
Ethyl acetate
Benzene
Water
Solubility
19
24
46
<0.01
Introduction :
Ys 770 is a low molecular weight hindered amine light stabilizer(hals) that provides excellent light stability for thick sections¡¢films and tapes in the recommended substrates , particularly in pp thick sections. It has broad compatibility and can be easily dispersed.
Compared to conventional uv-absorbers , the effectiveness of ys 770 is less depend on the polymer¡¯s thickness. For this reason , the use of ys 770 also provides good light stability in materials with high specific surface, e.G. Films and tapes.
Combined with other hals, ys 770 could perform better effectiveness, e.G. Ys 791
Applications :
Ys 770 is recommended to be used in polypropylene , impact modified pp(tpo) , epdm , polystyrene , impact polystyrene , abs , san , asa and polyurethanes and is also effective in polyamides and polyacetal.
Guidelines for use :
The recommended concentrations range between 0.1% and 0.5% , depending on the substrate , processing conditions and application. Ys 770 has low toxicity. In japan ¡¢canada ¡¢america etc , ys 770 could be used in polyolefin plastic which contacts food directly. The maximum concentration is 0.5% in japan and america and is 0.35%
25kg/carton, 500kg/pallet
711 Stabilizers Suppliers
Short on time? Let Stabilizers sellers contact you.
Chemical name : butanedioic acid, polymer with 4-hydroxy-2, 2, 6, 6-tetramethyl-1-piperidine ethanol
Molecular formular : c15n+1h25n+4o4n+1n n
Molecular weight : mn=3100~4000
Cas no : 65447-77-0
The sale code name : ys 622
Physical and chemical properties:
Appearance and behavior : white to slightly yellow powder , odorless
Loss on drying(%) : ¡ü0.5
Transmittance : 425nm ¡ý95.0 ; 500nm ¡ý98.0
Clarity : transparent solution
Melting/freezing temperature : 50~70¡æ(softening range)
Ignition temperature : 370¡æ
Ash : ¡ü0.1%
Softening point : 55~70¡æ
Water solubility (20¡æ) : ca 1.6mg/l
Introduction :
Ys 622 is the low volatility and minimal migration , because of its oligomeric structure with high molecular weight. Furthermore ys 622 is effective as antioxidant and contributes significantly to the long term heat stability of polyolefins and tackifier resins.
Application :
Ys 622 areas of application include polyolefins(pp , pe) , olefin copolymers such as eva as well as blends of polypropylene with elastomers. In addition ys 622 is highly effective in polyacetals , polyamides and polyurethane applications.
The effectiveness of ys 622 surpasses significantly that of uv absorbers , particularly in pigmented systems.
Handling and safety :
In accordance with good industrial practice , handle care and prevent contamination of the environment. Avoid dust formation and ignition sources .For more detailed information please refer to the material safety data sheet.
Toxicity £ºrat ld 50>2000mg/kg body weight taking orally
Use :
Uv-292 liquid hindered amine light stabilizer which is widely used to improve the weatherability of a variety of polymers. Uv-292 is highly effective used for a wide range of polymers and applications including polyurethanes, sealants, adhesives, pmma , elastomers, unsaturated polyesters, acrylics, vinyl polymers(pvb, pvc). It¡¯s especially applied in polyurethane , because it has good compatibility in solvent
Hindered amine light stabilizer, mainly used in paints and printing ink, especially developed for coating. It¡¯s efficiently provides significantly extended life time.
Specifications
20kVA Input Phase Three phase
Voltage AC 280~430V AC 304~456V
Frequency 50 Hz
Output Voltage 380�± 3 % (Adjustable)
Capacity 16kW 24kW 32kW 48kW 72kW 80kW
Frequency 50Hz
Protection Under volt AC 318 �± 7 %
Over volt AC 426 �± 7 %
Delay 3-7 sec/3-7 Min (Optional)
Over load Yes
Bypass Manual
Short phase Yes
Cooling system Natural Cooling System
Efficiency AC-AC > 95%
Environment Humidity 20 % to 90%
Temperature -50 C ~450 C
Control System Step less control with servo motor, Individual phase control
The Servo voltage stabilizer maintains the quantity of voltage in the power system, even in the case of voltage fluctuations. The control element basically converts the unregulated input to the regulated output.
GENERAL SPECIFICATION
The product range offered by us is inclusive of Servo Stabilizers, Electronics Plating Rectifiers and Electronics Rectifiers. Their longer serving life, compact design, less power consumption, easy operation and low working cost, makes these machines highly appreciated among our patrons. The offered range finds wide applications in various commercial, industrial and household applications. Offered by us at industry leading prices, these electronic and allied machines and equipment are highly appreciated among our patrons. We are Best manufacturer of Servo Voltage Stabilizer and Rectifier.
Rating: Up to 5000 KVA
Feature
1) There is high speed chip controller as brain behind the control board, 20x4 LCD to display instantaneous electrical parameter
2) Self teaching type Front panel for parameter setting
3) Smart and Intelligent to control overload based system
4) User settable Output voltage Upper and Lower voltage cutoff based on output set value
5) There is Individual message for each fault.
6) Single board for control and conditioning
7) For alarm On board buzzer
8) User settable Buzzer control
9) Very simple for wiring and maintenance
10) Fault history storage facility and can store No. of faults
11) System ON/OFF control through Front panel soft key for maintenance
12) Three phase separately can be controlled independently through single board In analog type servo voltage Regulator, it requires separate digital meter and overload facility is normally not provided All the settings are provided as factory setting, users have very less option to set.
Advantages & Benefits
1) Higher reliability and performance, easy for user
2) Easy to change output parameter as per customer need
3) System will not allow more than system power rating
4) Load will be always safe from the output over voltage
5) Very Easy to find out unhealthy status of servo or load. User can take preventive action based on this indication.
6) User will get buzzer for all kinds of faults to recognize system status without visualizing
7) Reduced wiring will increase reliability in the system, lesser probability of failure malfunction.
8) Very good feature of Digital controller, user will always be aware with load pe Conditioning. User himself can take preventive actions. This will reduce time to
9) This will provide correct information of how much maximum voltage and load c sustained by the System. From this preventive action can be taken for the load.
Integral blade stabilizer is an important tools in drilling engineersing to control the well devination, it can stabilze the drilling ttools in the drilling process of oil, gas and geological exloration. it can increase the bit life, drilling speed and well bore quality, there are two kinds of integral stabilizers, spiral blade stabilizer and straight integral blade stabilizer.
Hard fasing type: HF1000, HF2000, HF3000, HF4000 etc.
API 7K Drill stabilizer 9.5in body 23" integral spiral blade stabilizer rotary stabilizer
In the field of industrial stainless steel welding, in order to obtain high quality weld quality. A argon arc welding (TIG) process will be used. When the process is automatically welded, as the welding speed increases, the arc will be dragged, and the faster the speed, the more obvious the penetration, which will affect the welding quality.
As shown in Figure 1, there are undercut problems on both sides and inside of the weld, and there is a "hump" problem inside and outside the weld. Especially for industrial welded pipes, sanitary pipes, when the undercut problem is not smooth, it will cause residual liquid and corrode the steel pipe. It also causes stress corrosion points. Therefore, in the field of industrial welded pipes, in order to obtain high-quality welds, it is necessary to reduce the welding speed and ensure the welding quality.
Lead One-pack Stabilizer for Profile ProStab NV-1XXX
Product Introduction
NV-1XXX series are mainly used for the processing and producing of all kinds of pvc Profile .It is irregular flake or granular dust-free which is produced by metal compound stabilizer with the amount of chelating agent,lubricants and other internal and external components with the company's unique processing technology.The product contains the right amount of complex antioxidant system and other functional polymer additive,which can significantly increase profile'sperformance and improve the surface luster.
Product Properties
The series products have excellent heat resistance,light resistance,weather resistance and good processing performance.With sufficient strength,impact degree,welding performance and good dispersion,the product can adapt for different processing equipments.
The Integral Spiral Blade Stabilizer is made from AISI 4145H modified alloy steel, and completely meets the requirement of API Spec 7-1 and SY/T5051-91 Standard. It is mainly used to stabilize the drilling tools in the process of drilling hole. It can be separated into Drill String and Near bit types.
Hs code: 3920.61.0000
Applications
Cleanglas is single layer sheets manufactured by extruding, molding and cutting process of polycarbonate resins.
Competitiveness
Cleanglas has excellent resistance to shocks and heat and we also provide high quality polycarbonate sheets in various sizes and colors at competitive price. Customizing is always available.
P&b woochang embossed sheet has diamond grid embossed on its surface. The texture diffuses the natural light and ensures equal dispersion over a large-scale area.
Specifications
All our company standard products can be made of resin has been added uv stabilizer.
Insulation (great thermal resistance)
Resistance against shocks (safety against breakage)
Glass-like transparency
Light weight
Curve for easier construction
All products will be made according to api and related international standard as per customers' requirements.
Integral blade stabilizer is an important tool in the drilling engineering to control the well deviation. It can stabilize the drilling tools in the drilling process of oil, gas and geological exploration. It can increase the bit life, drilling speed and well bore quality. There are two kinds of integral stabilizers: spiral integral blade stabilizer and straight integral blade stabilizer.
Hardfacing type: hf1000, hf2000, hf3000, hf4000
711 Stabilizers Suppliers
Short on time? Let Stabilizers sellers contact you.
