Please click here to check who's online and chat with them.

Find Verified Scientific Instruments Suppliers, Manufacturers and Wholesalers

Aug-08-18
 
1. Introduction
ECM1/2 series gas condenser is used in the sample gas pretreatment system to remove moisture from the sample. Precise measurement of gas composition means sample gas under dew point can be stable even under bad environment. ECM condenser is to improve measurement precision and life span.
2. Features
Perfect design, only one component: compressor
Two-loop system
Two-loop heating exchanger
Constant temperature adjusting system with patent
With temperature display
Temperature alarm
Dew point stability: 0.2
Environment protection refrigeration without Freon
3. Specifications
1.Ambient Temp045 6.Dew point Temp4Factory set
2.Temp Control Accuracy±0.27.Power supply220VAC 50/60Hz
3.Gas Inlet Temp80 8.Voltage300V, fuse10A
4.Gas flow rate300L/h 9.IP gradeIP20
5Warming-up Time15 min 10.Installationwall mounted or 19?�rack
Aug-08-18
 
I. Introduction
SS-UV-300 flue gas analyzer (low emission monitoring) based on years of experience in research and development of flue gas analyzer, combined with the field practice of nearly ten thousand successful application cases. A number of techniques of the flue gas analyzer (standard form) are upgraded (many times return room to increase gas absorption optical path, and higher accuracy of spectrometer, convection heat transfer core module temperature control, etc.).
The analyzer is based on DOAS and chemometric algorithms (PLS), able to measure concentration of gases including SO2, NO2, NO, O2, NH3, Cl2, O3, H2S, CH3I, etc. It has features of high measure accuracy, outstanding reliability, fast response time and wide applicable scope. All indexes reach or exceed those of domestic & foreign similar products, and fully qualify measurement technology index of low emission monitoring occasions.

II. Application fields
It mainly used for industrial boilers, industrial furnaces emissions monitoring in power plant, iron & steel factory, cement plant and son.

III. Specifications

Model Standard Low Emission Ultra-low Emission
Range 0-300-3000ppm 0-100-300ppm 0-20-100ppm
Linearity ±1.5%F.S.
Repeatability ±0.5%F.S.
Zero Drift ±2%F.S/7d
Span Drift ±2%F.S/7d
Response time(T90) 10S 30S 30S
Working Temp -10-+40
Preheating time No preheating Approx.10 min
Sample Gas Interface 6
Sample Gas Flow 0.5-2L/minFluctuation
Aug-08-18
 
I. Introduction
The analyzer is based on NDIR (Non-dispersive Infrared) technology able to measure concentration of gases including CO,CH4,CO2,SO2,NO etc. It has features of high measure accuracy, outstanding reliability, fast response time and wide applicable scope. All indexes reach or exceed those of domestic & foreign similar products, and fully qualify measurement technology index of low emission monitoring occasions.

II. Application fields
It mainly used for industrial boilers, industrial furnaces emissions monitoring in power plant, iron & steel factory, cement plant and son.
Aug-01-18
Supplier From Shenzhen, Guangdong, China
 
SMT spare parts X 8mm Dual Smart Feeder 00141269-03 for siemens smt pick and place machine



SMT spare parts X 8mm Dual Smart Feeder Product Details:

Siemens/ASM Siplace X 4mm feeder 00141268

Siemens/ASM Siplace X 8mm feeder 00141270 00141290 00141370 00141390

Siemens/ASM Siplace X 2x8mm feeder 00141269 00141289

Siemens/ASM Siplace X 12mm 00141271 00141291 00141371 00141391

Siemens/ASM Siplace X 16mm 00141272 00141292 00141372 00141392

Siemens/ASM Siplace X 24mm 00141273 00141293

Siemens/ASM Siplace X 32mm 00141274 00141294

Siemens/ASM Siplace X 44mm 00141275 00141295

Siemens/ASM Siplace X 56mm 00141276 00141296

Siemens/ASM Siplace X 72mm 00141277 00141297
Siemens/ASM Siplace X 88mm 00141278 00141298ABOUT US

GOLDLAND ELECTRONIC TECHNOLOGY CO., LTD focus on global Surface Mount electronic assembly sector for 10 years. We mainly provide competitive price and high quality products for various brands of SMT equipments, SMT feeders, SMT nozzles, SMT feeder spare parts, AI equipments, AI spare parts and other related products. The brands is: FUJI, KEM, PANASERT, YAMAHA, JUKI, Hitachi, Universal, Siemens, I-pulse, Assembleon, DYNAPERT, TDK and so on
Jun-20-18
 
Explore is the newest generation hand held xrf analyzer, it is the best hand held XRF analyzer with many features that you cant find in the markets and other brands
The features of Explores are as below:

1. Best SDD detector in the world:it equiped with the best SDD detector-fast SDD detector, that enable to analyze light elements directly without helium asist from Mg U

2. more powerful data library:it can test rare earth elements and enable to test 34 elements simultantaneously

3. more safety design, there is insurance lock key to gurantee the safety for operator and invoid mis operate

4. non power off design, the analyzer works 5 minutes even you take the battery off the analyzer, which offer you enough time to change battery and finish testing once the battery power off

5. 3 color light system: there are green, red and yellow light system to show you the working status of the analyzer

6. operator and expert mode system easy to switch

7, 3 seconds fast scan for metal alloy and stainless steel
1998 Scientific Instruments Suppliers
Short on time? Let Scientific Instruments sellers contact you.
Apr-12-18
 
Size (open) L110cm*W240cm*H44cm
Equipped with drone self-stabilizing system Yes
Equipped with runaway safeguard Yes
Equipped with GPS system Yes
Max. Speed 100 km/h
Drone Payload 8KG
Endurance time without load 22-23 mins
Endurance time with load 15-18 mins
Max. suspension stop time 30 mins
Battery capacity 16000 mAh
Battery life Charge/discharge 200-300 times
Max. remote control distance 1 km
Max. flying height 2 km
Application Hanging powerlines,bridge ropeways
Wind loading rate Level 6
Flying height 0-20m


The function of electricity wire installing drone:

1. The drone has accurate GPS positioning, and precise to ±1m in landscape orientation, and ±0.5m in portrait;

2. When the drone canâ??t get the remote control signal, it will enter into automatic protection mode which will let it be in suspension stop immediately. When there is no signal more than 20 seconds, the drone will return and land at the take-off place based on the GPS navigation system;

3. You can control the drone fly to any direction you want, no matter which direction the head towards to at this moment;

4. Under the straight mode, the drone will fly forward in a straight line;

5. The drone, with the function to fix the place for going back, can return to the take-off point automatically after the task is finished;

6. With protection function for low voltage. Once the voltage is lower the preseted, the lights will flicker to remind.



Advantages:

1. Made of carbon fiber material in aviation field, with reasonable design in aircraft and excellent performance in anti-impact; Foot stand is easy to retract;

2. Special design for high beam, and easy to be tracked;

3. With voltage indication function, more convenient for user;

4. Equipped with sealing motor, dustproof and waterproof;

5.Lifelong after-sale, more professional.
Apr-12-18
 
Size (open) L110cm*W240cm*H44cm
Equipped with drone self-stabilizing system Yes
Equipped with runaway safeguard Yes
Equipped with GPS system Yes
Max. Speed 100 km/h
Drone Payload 8KG
Endurance time without load 22-23 mins
Endurance time with load 15-18 mins
Max. suspension stop time 30 mins
Battery capacity 16000 mAh
Battery life Charge/discharge 200-300 times
Max. remote control distance 1 km
Max. flying height 2 km
Application Hanging powerlines,bridge ropeways
Wind loading rate Level 6
Flying height 0-20m


The function of electricity wire installing drone:

1. The drone has accurate GPS positioning, and precise to ±1m in landscape orientation, and ±0.5m in portrait;
2. When the drone canâ??t get the remote control signal, it will enter into automatic protection mode which will let it be in suspension stop immediately. When there is no signal more than 20 seconds, the drone will return and land at the take-off place based on the GPS navigation system;
3. You can control the drone fly to any direction you want, no matter which direction the head towards to at this moment;
4. Under the straight mode, the drone will fly forward in a straight line;
5. The drone, with the function to fix the place for going back, can return to the take-off point automatically after the task is finished;
6. With protection function for low voltage. Once the voltage is lower the preseted, the lights will flicker to remind.



Advantages:

1. Made of carbon fiber material in aviation field, with reasonable design in aircraft and excellent performance in anti-impact; Foot stand is easy to retract;
2. Special design for high beam, and easy to be tracked;
3. With voltage indication function, more convenient for user;
4. Equipped with sealing motor, dustproof and waterproof;
5.Lifelong after-sale, more professional.
Sep-13-17
Supplier From Ambala, Haryana, India
 
Battery Eliminator ranging from 1-3 Amp. With export Quality
Aug-07-17
 
Model Name
JSC-68S digital alcohol tester

Display
Red backlight 3-digit LCD screen

Sensor
semiconductor sensor

Detection Range
0.000-0.190% BAC
0.000-0.995mg/L (BrAC)

Alarm point
0.050% BAC
0.250mg/L (BrAC)

Accuracy
-0.01 to 0.02%BAC at 0.05%BAC

Response Time


-
Nov-08-24
Supplier From Taian, Shandong, China
Oct-17-24
Supplier From India
May-07-25

Telescopic Insulating Rescue Stick, no

$40 - $100 / Set (FOB)
MOQ: Not Specified
 
Product Features
Insulating Stick for rescuing work in various live workplaces. It is used to grasp the injured person by the waist and bring them back to a protected area. It can also be used to push a cable away from
a victim. Indoor and outdoor use.
Product Character ï¼?
1. Fiberglass Stick: meets ASTM F711, IEC 60855-1 and IEC61235 standards
Top tube - �¦28 round foam filled tube to prevent penetration of humidity
Outer tube - pentagonal tube is not easy to slip and increases torque
Environmentally friendly paint free process can avoid paint damage or paint
peeling
2. Hook: �¦18 steel tube, U shaped fitting, can be used for high voltage detector.
3. Dielectric strength: 100kV/300mm
4. Adapter: Insulation material for universal end fitting
5. Push button: Simply operation
6. Handle: Rubber material to protect the tip
May-06-25
 
Round telescopic insulating height measuring rod is calibrated to metric scale. The main insulating rod is made of high strength epoxy glass fiber tube. The product has excellent electrical and mechanical properties.
The height measuring rod is light in weight and easy to operate, it can measure the height of overhead power line and communication line from the ground. The calibration of the product surface is clear and accurate, and the measuring error is not less than 5cm.
How to use it:
1.When the height measuring rod is used, the rod cap is opened, and the hook is tightened on the screw of the details, and then gradually pulled out to the two sections of the Chimera, with a little force, and the edge of the twist is pulled out to ensure that the vertical lines of the two sections of the scale are aligned, until the semicircle marks between the two sections form a circle, then verify that the snap is fully ejected to ensure a complete lock between the two sections.
2.After the use of the height of the bar after the draw, one hand holding the lower thick pipe, with the thumb to hold the snap button, the other hand holding the top of a thin section, twist the edge up push, take back section by section.
3.The hook of the height measuring rod is screwed down, and can be installed with an electric apparatus head, and can be used as an electric apparatus rod.
Scale reading method:
After hook the altimeter pole to the measured object, make sure the altimeter pole is perpendicular to the ground, then observe the figures of the hand-held altimeter pole, the upper end of the node is aligned with
the scale line, this number is the height of the object being measured.
May-06-25

Telescopic Insulating Rescue Stick, no

$40 - $100 / Piece (FOB)
MOQ: Not Specified
 
Product Features
Insulating Stick for rescuing work in various live workplaces. It is used to grasp the injured person by the waist and bring them back to a protected area. It can also be used to push a cable away from a victim. Indoor and outdoor use.
Product Character ï¼?
1. Fiberglass Stick: meets ASTM F711, IEC 60855-1 and IEC61235 standards
Top tube - �¦28 round foam filled tube to prevent penetration of humidity
Outer tube - pentagonal tube is not easy to slip and increases torque
Environmentally friendly paint free process can avoid paint damage or paint
peeling
2. Hook: �¦18 steel tube, U shaped fitting, can be used for high voltage
detector.
3. Dielectric strength: 100kV/300mm
4. Adapter: Insulation material for universal end fitting
5. Push button: Simply operation
6. Handle: Rubber material to protect the tip
May-06-25
 
The triangle tube of the telescoping hot stick have maximum convenience for the lineman because they permit them to perform many routine jobs from ground level. The universal end fitting on the insulated top section accepts a wide variety of attachments, so the lineman can disconnect switches, replace cutout tubes and reclose, remove pole covers, prune trees, replace bulbs and complete many other overhead tasks.
The triangular tube section is shown as below pictures, approximate triangular arc is the most comfortable shape of hand grip. approximately triangular shape can avoid axial sliding during torsional operation. Compared with the traditional round tube, it is more stable, easy to connect to the operating part and easy operation.
1.Applied Standard: IEC60855, ASTM F711.
2.Parts Materialï¼?
Universal head with hook: aluminum alloy in nature color
Tube : Top section: Foam filled fiberglass tube in fluorescence green,
Other sections: Fiberglass tube in yellow
Handle: Insulation rubber in black
Bag: Water-proof Nylon bag in green
3. Product featuresï¼?
3.1 Unique design - approximately triangular tube structure, each section can be quickly telescopic positioning, no need to turn the joint to find the buckle and fixed.
3.2 High visibility - The outer layer of the top tube is fluorescent paint for easy identification during operation, the inner part is filled with moisture-proof insulating foam to prevent moisture accumulation.
3.3 Easy to operate -New large button with same size, easy to operate even with insulating gloves.
3.4 Easy to maintain - the sticks body is smooth and nonporous, easy for daily cleaning and waxing.
3.5 Multi-function - high strength aluminum alloy universal joint, can firmly connect all kinds of tool heads.
3.6 Various specifications - Extract length from 2.43 to 15 meters, retract length from 0.8 to 2.15 meters.
3.7 High electrical insulation strength - All products are passed 100kV/300mm power frequency voltage test.
May-06-25
 
The round teles coping hot s t i c k s have maximum convenience for the lineman because they permit them to perform many routine jobs from ground level. The universal end fitting on the insulated top section accepts a wide variety of attachments, so the lineman can disconnect switches, replace cutout tubes and reclose, remove pole covers, prune trees, replace bulbs and complete many other overhead tasks.
The sticks are short,so that it can be easy carried on most trucks.The spring-loaded buttons can keep the extended tool sections securely locked in position. As each section is extended and twisted slightly, the buttons into right place to make sure the linemen well done the job.
1. Applied Standard: IEC60855, ASTM F711.
2. Parts Materialï¼?Universal head with hook: Aluminum alloy in nature color
Tube : Top section: Foam filled fiberglass tube in yellow,
Other sections: Fiberglass tube in yellow
Handle: Insulation rubber in black
Bag: Water-proof Nylon bag in green
Dec-12-24
 
Features
* Nice appearance and innovative design
* LED illuminator around lens
* Imported lens with plated layer
* 5.0 Mega pixels high resolution Korea sensor * Special DSP image processor, Optical Image Stabilizer
* Single/Dual lamp control.
* Single capture button and digital pause capture.
* Adjustable focus to give clear image.
* Auto white balance and contrast adjustment, Color Temperature Filter
* Dual image compare function
* 3D-Negative capture mode
* Compatible with iris lens, hair lens and skin lens.
* Deliver clear and accurate images.
* Easy to operate.
* Maximum resolution: 2560x1920
Dec-06-24
 
Since 2011, Orientjohn has been a leader in the design, manufacturing, and customization of telescoping poles. With over a decade of experience, we combine innovative design, advanced production techniques, and rigorous quality standards to deliver reliable solutions for demanding applications. Our Heavy Duty Telescoping Pole is engineered to meet the toughest requirements, offering durability, versatility, and ease of use for various industries and professionals.
Dec-06-24
 
Fruit Picker Telescopic Pole by Orientjohn
Established in June 2011, Orientjohn specializes in the design, development, and production of telescopic poles. With over a decade of expertise, more than 10 proprietary patents, and cutting-edge manufacturing capabilities, we deliver high-quality products and customized Telescopic Tool solutions that meet the unique demands of various industries.

Our semi-automated production lines ensure an annual capacity of over 1 million poles, combining efficiency with exceptional quality control to meet the growing demands of global markets.

Product Features: Fruit Picker Telescopic Pole
The Fruit Picker Telescopic Pole is engineered for efficient and safe fruit harvesting, providing a practical solution to common challenges faced in agriculture and gardening.
Nov-05-24
 
Product descriptions from the supplier
Overview
Metallurgical Microscope

Specifications

Model

JX-203

Viewing Head

Trinocular, Inclination of 30�°

Eyepiece

Wide field WF10X(�¦18mm)

Objective

Plan achromatic objectives with long working distance 5X/0.12, 10X/0.25, 40X/0.60, 60X/0.75

Focusing

Coaxial coarse/fine focus system, with tensional adjustable and up stop, minimum division of fine focusing: 2�¼m

Nosepiece

Quadruple(Backward ball bearing inner locating)

Stage

Double layer mechanical (Size:185mmX140mm,movingrange:75mmX50mm)

Illumination

6V 20W halogen lamp, brightness control
1998 Scientific Instruments Suppliers
Short on time? Let Scientific Instruments sellers contact you.
See what buyers and suppliers are discussing in Scientific Instruments import export community