Smart Energy Meter IoT
With Internet of Things (IoT) enabled solutions for smart metering, you can improve customer service and increase profitability with actionable smart meter data insights.
Internet of Things Smart Meters
Traditionally part of the grid infrastructure, smart meters are electronic devices that can remotely monitor and record energy consumption. However, in the era of IoT and IoT platforms, standalone smart meters are giving way to more advanced and versatile smart metering solutions. These solutions offer a wider range of remote monitoring and alerting capabilities, as well as powerful data analytics tools to help companies and individual users optimize their energy, water, gas or fuel consumption.
Smart Metering Solutions with Acrel IoT Cloud Platform
Through the wireless network, you can check the status of IoT devices located across the country anytime, anywhere, and simply view data such as energy consumption and alarm reports.
Energy Analysis and Reporting
This page displays daily, monthly, and yearly energy graphs, while energy reports can be automatically generated in Excel format for export.
Parameter Monitoring
Monitor all parameters collected by IOT devices, can generate historical curves, and alarm based on parameter monitoring.
Alarm report
When a potential threat such as over-current, over-voltage or over-temperature occurs, it will be added to the alarm report and notify the user for current alarm.
Alarm Handling
Once the alarm occurs, the most important thing is to deal with the possible faults at the site in time, by sending the alarm processing to the site, in order to solve the problem in time.
Product Introduction
The wet gas flowmeter is a volumetric gas flowmeter. Its measurement range ranges from 0.016L/min for small flow to 200L/min for large flow. It has high accuracy, no leakage, and good stability. It is suitable for gas volume or flow measurement in laboratories, research institutions, environmental measurement, production sites, etc. It can also be used as a transmission standard and working standard, and is widely used in gas appliances, energy, chemical industry, environment, medicine, calibration and other industries. The products have been exported to Europe, America, Asia and other countries and regions.
Ã?Â
Product Features
1. Extra-wide flow range 1:300
2. Repeatability better than 0.1%
3. Intelligent correction (Volume and flow rate automatic correction)
4. Various automatic measurement methods (constant volume output, timing output, and fixed whole revolution output)
5. Full digital flow meters (Temperature, Pressure, Volume, High-precision measurement of flow, RS485 Bus Communication)
6. Intelligent wire control start and stop
7. Each is strictly calibrated with � 0.05-stage active piston prover to ensure accuracy
8.� No leakage (using advanced magnetically coupled transmission technology, non-oil seal)
Ã?Â
Precision (Repeatability)
Standard Flow Range: �± 0.1% (Standard deviation)
Entire Flow Range: �± 0.15% (Standard deviation)
Ã?Â
Material (Anti-corrosion)
304 stainless steel
316 stainless steel (customized)
Temperature measurement: 0-50
Pressure measurement: 0-10kPa
DM400 Chemical Moisture Meter
High Frequency moisture meter DM400 is our new designed product with separate probe .It used for measuring moisture content of soil ,silver sand, chemical combination powder, coal powder and other powder materials. It applicable of chemical industry and other relevant industry.
Features:
* It is portable, compact, easy to use and the moisture measurement readings are instant.
* Digital display with back light gives exact and clearly reading although you stay at the somber conditions.
* This instrument adopted the high frequency principle based on the introduction of the most advanced technology from foreign country.
* Low battery alert.
Specifications:
Display:4 digital LCD
Measuring range :
0.00%-2%
0.0%-90%
Measuring conditionï¼?
Temperature:0-60°C
Humidity:5%-90%RH
Resolusion:0.1 or 0.01
Accuracy: ± 0.5%n
Power supply: 9V battery
Dimensions: 172Ã?66Ã?28ï¼?mmï¼?
Needleï¼?450mm
Weight:250g
PVC Float Flow meter model RPV164 is made by transparent AS body with PVC union connector and ABS coated steel floator, the function is to measure the flow rate of pipe system. FLOW METER is easy to observe the flow inside the system, PVC flow meter measuring range from 5l/h to 200m3/h, connect size from 20mm to 160mm by socket, and DN15 to DN150 by flange. Rota meter is used for water system and water treatment systems.
Feature of flow meter
All the parts that touch medium are made by plastic and stainless steel.Â
Measureing range is widely.Â
Union design is convenient to install and replace.Â
Transparent body is convenient to observe the medium, and diagnosis problem.
Suitable for vertical installation only
582 Electric Power Meters Suppliers
Short on time? Let Electric Power Meters sellers contact you.
GF312V2 portable three phase multifunction watt-hour meter calibrator on-site is the newest product produced by our company by widely visiting users and referring to the advantages of the same kind of products home and abroad. The measured part of the product adopts high speed A/D transmission to send DSP to conduct digital processing, which largely improves measured degree of accuracy and stability. Central processing part adopts 32-bit ARM embedded technology to make instrument interface novel, function abundant, operation distinct and easy, and performance steady. Class of accuracy: Class 0.02, 0.05 or 0.1, range from 12A/600V or 120A/600V, with comfort design, small size and light weight. The model GF312V2 watt-hour meter calibrator is suit for electric power departments, measuring and quality examining departments and electric lab to field use.
GF312B2 portable three phase reference meter high accuracy 0.02%, with all kinds of optional clamp on ct and smart optical sampler. It can be applied in electrical laboratory or on site. it will be ensured by a combination of measures such as the use of 24bit A/D converter.
APPLICATION:
Power plant;
Electrical laboratory;
Energy meter R & D;
Watt-hour meter factory;
Metrological service center;
Electricity power bureau & power company;
The GF302D3 portable three phase energy meter test bench consists of an integrated three phase 120A current source and 600V voltage source and a class 0.02 three phase electronic reference standard meter.
The energy meter test bench is particularly designed for analysis of complete metering installations and local mains conditions. The meter test bench offers high functionality combined with an excellent menu guided operation via built-in thirty keys and colored 7 touch LCD-display. It can auto & manual test all kinds of energy meter error. Using on site or in the laboratory. It can preset a variety of test schemes for testing energy meter.
Portable Three-phase Standard Meter is a portable reference standard meter used to test three phase meters and single phase meters, it designed to work both in the and in the laboratory.
The portable Three-phase standard power source is suitable for metering departments, power distribution terminals, power management, reactive power compensation devices and enterprise production.
Portable Three-phase Standard Meter is a portable reference standard meter used to test three phase meters and single phase meters, it designed to work both in the eld and in the laboratory.
Electrical equipments in modern industrial, commercial and residential users are more sensitive to power quality, and have a higher requirement of quality of power supply. Currently, harmonics,electromagnetic interference, power factor reduction have been tied to the three hazard of the power system.
When it is interfered or contaminated, grid power quality can t reach the national standards, so it has to be targeted on the grid power quality improvement. To understand the actual situation of power quality, you must have the appropriate equipment to test and analysis the actual situation. Counter the domestic condition, our company developed the professional power quality analysis instrument, which is suitable for the country.
3 phase handheld power quality analyzer Technical index
GF312B portable three phase energy meter calibrator with printer is used to calibrate three phase, single phase, active and reactive energy meters error. The instrument has a micro printer and portable design. It is very suitable for on-site calibration of electric energy meters.
Feature:
1.accuracy:0.05%,0.1%,0.2%
2.Test range:0-600V;
3.With printer
4.Harmonic:2-64times
5.Weight: 12kg
6.IP65
Single phase standard power supply is suitable for power department, quality control department, research units, institution of higher learning, electric energy meter, power supply management, load control, power quality, reactive power compensation device and production of the enterprise and so on. It can be as single phase voltage source, current source and power source.
Electrical parameters
Electrical parameters
Accuracy class
0.05, 0.1
Power supply
Single phase AC 85-265V, 50 60 Hz
AC Voltage output
Range
57.7V 100 V 220V 380V, Switch automatically max 500V
This product has a unique integrated design and strong structure which can be used outdoor and in rainy environment. It could also withstand the crushing of a vehicle. This Type 2 (Male) Type 2 (Female) Cable permits Single phase 32Amps of charge to flow into the electric vehicle. It used to connect vehicle with EVSE Socket (Female) to Electric Vehicle Inlet Socket (Male)JT Mobility mode 3 charging cable is a connector cable between the charging station and the electric car. To allow electric cars to be charged using type 2 plugs. This cable works on all charging stations mode 3 according to standards ISO 17409 and IEC 61851. It is compatible with all the charging stations and all EV rechargeable vehicle with type 2 standard. This cable will work safely on all charging stations, even the ones with inferior or superior charging power
Application:
HV test shielding room (faraday cage) are Widely used in power cable, transformer, transformer switch, transformer substation and other High voltage levels of partial discharge test or impulse test.
For HV testing shielding room, as a HV test place, it should has good electromagnetic
shielding condition. And its electromagnetic compatibility always is of great importance.
Firstly, it should restrict electromagnetic wave into inside shielding room caused by
discharge when making HV test to weakening interfere to outside, especially on
electronic and communication system. Secondly, it should prevent outer
electromagnetic wave intruding into shielding room to cause measurement error of
partial discharge and wireless. Thirdly, it should reduces open circuit voltage and
closed current to restrain common-mode interference so that to avoid equipment
damage and to improve accuracy of impulse measurement.
For GIS HV test shielding room, design area is 500 m2ï¼?Length 25mã??Width 20m).
From provided information , we find that steel structure have been completed
already with one set of 20T crane indoor, crane supporting corbel also completed, the
height is 17.9m from ground to upper part of corbel. Main door height 13m,width 10m,
locates at downward of the west side, the door open direction towards to north .
According to ILJIN drawing, three side of structure column has already, but western
structure column still missing yet. however, as the main door will be located in this side,
the western side also should have steel structure , and this structure position still should
be unified considered with main door installation. We will be able to submit suggested
design diagram with position & size of this structure column for reference. in order to
save construction cost, the construction engineering will be carried out by ILJIN
team.
Scratch Grinding Tester
Automobile line inspection equipment
Wire and Cable Detection Equipment
It is applicable for assessing the scratch-resistant performance of automobile wire insulation with external forces in line with the requirements of GB/T12528-2008.
Main parameters:
1. The scratch grinding device exercises in two directions along wire axes with a stroke above 10mm
2. Exercise frequency: 50~60 cycles/min
3. Minimum distance between test points and test point and test sample end: >10mm; rotation angle of test sample: 90°
4. Length of test sample: Test sample which is about 750mm is firmly fixed to a steel anvil
5. Weight: 400, 700, 1000g (weights applied to scratching needle)
6. Function: The device will stop when the scratching needle grinds through insulation and comes into contact with conductor
Resistance Test Instrument Supplier
ZY9733 and ZY9734 digital desk type low current resistance measuring meters are suitable for units concerned to measure the DC resistance of various components and parts with certain limitations on current, such as platinum resistor, coppery thermal resistor, PTC ceramics, thermistor and various wire rods, etc.
1. Key features
1.1 It adopts a large green LED to display measured value, which is striking and clear. It also adopts the four-terminal resistance measurement method to eliminate the impact of conductor resistance, and the measurement accuracy is high.
1.2 There are a variety of specifications, and each specification has four scales to meet the measurement requirements of different users.
1.3 The test current is lower than similar equipment, which effectively prevents the impact of components and parts on resistance.
1.4 ZY9734 type has a RS-232 serial data output interface to facilitate the connection to computer.
1.5 It adopts a novel plastic shell and can changes the inclined angle between the device and table by adjusting the handle position, so as to determine the suitable panel observation angle. It has a well-designed appearance and is easy to use.
2. Main technical indicators
Temperature: Reference conditions: 20±5; nominal condition: 5~35
Relative humidity: Reference conditions: 40~60%; nominal condition: 25%~75%
Power source: AC 220V±10%, 50Hz, power consumption: About 5VA.
Sawdust Moisture Meter MS-W
Sawdust moisture meter with seperate probe MS-W used for measuring moisture content of wood materials(such as sawdust,paillasse,bamboo powder and wood chips).It applicable of paper making , flakeboard , furniture and mechanism of charcoal industry.
Features:
* It is portable, compact, easy to use and the moisture measurement readings are instant.
* Digital display with back light gives exact and clearly reading although you stay at the somber conditions.
* The moisture meter operation has automatic temperature compensation.
* Data hold function.
* Low battery alert.
Specifications:
Digits LCD with backlight
Measuring range :0-84%
Operating conditions:
Temperature:0-60
Humidity:
Large, easy to read backlit, graphic display with adjustable backlighting and contrast.
Display shows tension, name of calibration selected, running line minimum and maximum tension values, and battery charge level.
Indicate length of material in feet or meters.
582 Electric Power Meters Suppliers
Short on time? Let Electric Power Meters sellers contact you.
