Forklift Series Lithium Iron Phosphate Battery Pack Parameters
Series parameters Remarks
No Items 48V 72V 80V
1 Cell material type Lithium iron phosphate
2 Nominal voltage 51.2 76.8 83.2
3 Operating voltage range 40-58.4 60-87.6 65-94.9
4 Nominal capacity 172-700 Customizable within the range
5 Charge cut-off voltage 58.4 87.6 94.9
6 Discharge cut-off voltage(V) 40 60 65
7 Standard charging current(A) 1 Constant current charging at
25 C ambient conditions
8 Standard discharge current (A) 1 Constant current discharge at
25 C ambient conditions
9 Discharge operating temperature range() 20 55
10 Charging temperature range() 15 55
11 Storage ambient temperature) (20 - 55, short term, within 1 month; 0 - 35, long term, within 1 year)
12 Storage environment humidity(RH) 5% 95%
13 Humidity of the working environment(RH) 85%
14 Cycle life at room temperature 25 C, 3000 cycles ( 80% of rated capacity)
1C charge/discharge multiplier
15 High temperature
cycle life 45 C, 2000 cycles (80% of rated capacity)
1C charge/discharge multiplier
16 Self-discharge rate at room temperature(%) 3%/month, 25 C
17 High temperature self-discharge rate (%) 5%/month, 45 C
18 High temperature discharge performance 95% (1. Battery charged in standard charging mode (battery charged at 1C constant current and constant voltage to 3.65V, cut-off current 0.05C; discharged at 1.0C constant current to a minimum discharge voltage of 2.5V at 45 C 2)
19 Low temperature discharge performance 70% (1. Battery charged in standard charging mode (battery charged at 1C constant current and constant voltage to 3.65V; discharged at 0.2C constant current to 2.5V at -20 2 C)
20 Case size Customised according to customer requirements
21 Control systems BMS solutions
Forklift Series Lithium Iron Phosphate Battery Pack Parameters
Series parameters Remarks
No Items 48V 72V 80V
1 Cell material type Lithium iron phosphate
2 Nominal voltage 51.2 76.8 83.2
3 Operating voltage range 40-58.4 60-87.6 65-94.9
4 Nominal capacity 172-700 Customizable within the range
5 Charge cut-off voltage 58.4 87.6 94.9
6 Discharge cut-off voltage(V) 40 60 65
7 Standard charging current(A) 1 Constant current charging at
25 C ambient conditions
8 Standard discharge current (A) 1 Constant current discharge at
25 C ambient conditions
9 Discharge operating temperature range
10 Charging temperature range
11 Storage ambient temperature) (-20 - 55, short term, within 1 month; 0 - 35, long term, within 1 year)
12 Storage environment humidity(RH) 5% 95%
13 Humidity of the working environment(RH) 85%
14 Cycle life at room temperature 25 C, 3000 cycles (80% of rated capacity)
1C charge/discharge multiplier
15 High temperature
cycle life 45 C, 2000 cycles (80% of rated capacity)
1C charge/discharge multiplier
16 Self-discharge rate at room temperature(%) 3%/month, 25 C
17 High temperature self-discharge rate (%) 5%/month, 45 C
18 High temperature discharge performance 95% (1. Battery charged in standard charging mode (battery charged at 1C constant current and constant voltage to 3.65V, cut-off current 0.05C; discharged at 1.0C constant current to a minimum discharge voltage of 2.5V at 45 C 2)
19 Low temperature discharge performance 70% (1. Battery charged in standard charging mode (battery charged at 1C constant current and constant voltage to 3.65V; discharged at 0.2C constant current to 2.5V at -20 2C)
20 Case size Customised according to customer requirements
21 Control systems BMS solutions
Forklift Series Lithium Iron Phosphate Battery Pack Parameters
Series parameters Remarks
No Items 48V 72V 80V
1 Cell material type Lithium iron phosphate
2 Nominal voltage 51.2 76.8 83.2
3 Operating voltage range 40-58.4 60-87.6 65-94.9
4 Nominal capacity 172-700 Customizable within the range
5 Charge cut-off voltage 58.4 87.6 94.9
6 Discharge cut-off voltage(V) 40 60 65
7 Standard charging current(A) 1 Constant current charging at
25 C ambient conditions
8 Standard discharge current (A) 1 Constant current discharge at
25 C ambient conditions
9 Discharge operating temperature range
10 Charging temperature range
11 Storage ambient temperature (-20 - 55, short term, within 1 month; 0 - 35, long term, within 1 year)
12 Storage environment humidity(RH) 595%
13 Humidity of the working environment(RH) 85%
14 Cycle life at room temperature 25°C, 3000 cycles 80% of rated capacity)
1C charge/discharge multiplier
15 High temperature
cycle life 45°C, 2000 cycles (80% of rated capacity)
1C charge/discharge multiplier
16 Self-discharge rate at room temperature 3%/month, 25°C
17 High temperature self-discharge rate 5%/month, 45°C
18 High temperature discharge performance 95% (1. Battery charged in standard charging mode (battery charged at 1C constant current and constant voltage to 3.65V, cut-off current 0.05C; discharged at 1.0C constant current to a minimum discharge voltage of 2.5V at 45
19 Low temperature discharge performance 70% (1. Battery charged in standard charging mode (battery charged at 1C constant current and constant voltage to 3.65V discharged at 0.2C constant current to 2.5V at -20±2C)
20 Case size Customised according to customer requirements
21 Control systems BMS solutions
1000ml Manual foam soap dispenser
Unit Size L115 W122 H202 mm
Unit Weight 400g
Material ABS & AS
Volume 1000ml
Lock Lockable with key
Type Bulk dispenser
Packing 24pcs/ctn
Installation Wall mounted
Product Details
Big volume bulk foam soap dispenser
Big area transparent part is easily to check the liquid level
Suitable for foam soap, hand soap, lotion, shower, baby oil, detergent
1000ML School Automatic Foaming Sanitizer Antibacterial Dispenser
Unit Size L135 W120 H265mm
Unit Weight 850g
Material ABS
Volume 1000ml / 1300ml
Sensing Distance 5-8cm
Power Supply 4 pcs C batteries (not included)
Lock Lockable
Type Refillable bottle / disposable pouch
Installation Wall mounted
Packing 10pcs/ctn
Product Details
Proper window to check liquid level
-Big logo print space for promotion
Patented modular design. In the links of installation, use, supply, maintenance, safety, logistics & support, it reducing the labor & working hours, as well as compressing budgets & costs
-Low power consumption. The battery life reaches more than 150,000 times, near 3 years, while the average is 30, 000~100,000 times
-Silent working sound. Compare with peerss automatic dispenser the working sound is quite low and there is almost no mechanical sound
Suitable for hand soap, detergent, hand sanitizer, disinfection, alcohol gel, alcohol liquid spray, hypochlorous acid, Isopropanol sanitizer
Optical Line Protection (OLP) system is a new optical line protection subsystem developed with advanced technology of dynamic and synchronous optical switches. When communication quality is lower or equipment breaks down due to accidental fracture or bigger loss of optical fiber in the optical transmission line, the OLP system can switch the primary line to the secondary line within a short time, to ensure normal operation communication of line, which effectively prevent fiber or equipment fault and shorten the recovery time from hours to milliseconds.
Optical Line Protection switch provides both Manual and Automatic switching mode. In Manual mode, the system switches optical path only based on the commands from user.
In the Automatic mode, the system switches based on the power level detected and the preset threshold. Under automatic mode, the system can be set to be revertive or Non-revertive modes.
Under Revertive mode, the system switches back to the working path automatically after the fault condition is cleared. Under Non-revertive mode, the system does not switch back. The OLP models fit HT6000 Series CH04, CH08, CH20 Chassis.
DWDM Optical Add/Drop Multiplexer (OADM) is a passive optical device used in WDM networks for adding and dropping one/multiple 100 GHz DWDM channels in the C-band into one or two fibers, while letting the rest of the wavelengths bypass to the needed destination. Using the DWDM technology can add effectively WDM capability to their existing and new networks, and extend the optical signals transmission distance.
DWDM OADM modules are available in single-side (East or West) and dual-side (East and West) configurations. With matching MUX/DEMUX units placed at each end of an optical link, multiple data channels can be combined and transmitted over a single-mode fiber trunk. The passive OADM modules can add or drop 2, 4, 8 data channels at any point along the trunk.
The HT6000-OD/OM16 from HTF is a combined passive Sixteen-Channel 100GHz DWDM multiplexer or de-multiplexer (MUX or DEMUX), It combines standard 100GHZ DWDM ITU grid channels 21 through 60, and applies to 1U chassis ,2U chassis and 5U chassis,occupying one service slots.
The HT6000-OD/OM16 is ideal for increasing the fiber capacity between two sites without the need for installing or leasing additional fibers. The complete passive solution requires no power cabling and no configuration; it is a true plug and play solution.
The Mux/Demux enables separation of the active equipment from wavelength multiplexing components. It may be used in conjunction with active optical devices from HTF or from another DWDM-compliant manufacturers.
HTF launched SOA series optical amplifier products can be 1290nm ~1320nm wavelength range to achieve amplification. It can be easily used in 100G transmission system, the maximum can support 160G/s rate. SOA optical amplifier can be used for booster amplification, pre-amplification and other occasions.
O-band optical signal overall amplification
Covering the wavelength range of 1290 ~ 1320nm
100G 1310nm signal amplification
Support O-band, 1290 ~ 1320nm band amplification
Output power up to 10dBm
100G 1310nm signal amplification
Support APC
Low noise, high gain
One board supports up to 2 channels of signal amplification
EDFA optical amplifier module provide multi-function, low noise, Erbium-Doped Fiber Amplifier (EDFA) solutions, The amplifier module can be operated at constant gain (Automatic Gain Control AGC), constant output power (Automatic Power Control, APC). This is a highly integrated EDFA, and the large module supports Dual amplifier with two independent gain units .
Wide operating wavelength range:1528nm~1565nm
Dual amplifier contains two independent gain units
Low noise figure: typ 5dB
Excellent gain flatness
Multiple operating modes:
AGC adjustable Gain
APC output is adjustable
Optional OSC channel for remote management
MON port, on-line monitoring optical power and OSNR
EDFA optical amplifier module provide multi-function, low noise, Erbium-Doped Fiber Amplifier (EDFA) solutions, The amplifier module can be operated at constant gain (Automatic Gain Control AGC), constant output power (Automatic Power Control, APC). This is a highly integrated EDFA, and the large module supports Dual amplifier with two independent gain units .
Wide operating wavelength range:1528nm~1565nm
Dual amplifier contains two independent gain units
Low noise figure: typ 5dB
Excellent gain flatness
Multiple operating modes:
AGC adjustable Gain
APC output is adjustable
Optional OSC channel for remote management
MON port, on-line monitoring optical power and OSNR
With the application of long-distance systems becoming more and more extensive, our company's self-developed middle stage access (MSA) EDFA, middle stage access (MSA) EDFA can effectively solve the insertion loss caused by DCM and OADM, offset the DCM and OADM bands. The resulting insertion loss reduces the additional degradation of the system OSNR.
C-band optical signal overall amplification
Covering the wavelength range of 1528 ~ 1565nm
Support systems to achieve different cross-section radio repeater transmission
Wide operating wavelength range:1528nm~1565nm
Low noise figure: typ 5dB
Excellent gain flatness
Multiple operating modes:
AGC adjustable Gain
APC output is adjustable
ACC voltage adjustable
Mid-stage access for DCM or OADM
Offset the insertion loss introduced by DCM
Reduce the additional degradation of system OSNR
Optional OSC channel for remote management
MON port, on-line monitoring optical power and OSNR
Middle stage access (MSA) EDFA models include an additional mid-stage port designed for insertion of a Dispersion Compensation Management (DCM) unit without its inherent insertion loss.
The design of these models maximizes the DCM benefits to increase deployment flexibility.New placement options require fewer amplifiers in the link, and they can open the door to applications that were not possible with older technology.
Single Fiber Bidirectional EDFA Amplifier models include a Red and a blue port designed for single fiber DWDM Solution. The design of these models is used for single-fiber DWDM transmission systems.
C-band optical signal overall amplification
Covering the wavelength range of 1528 ~ 1561nm
Support systems to achieve different cross-section radio repeater transmission
Operating wavelength range:
Blue: 1528nm~1543nm
Red: 1547nm~1561nm
Low noise figure: typ 5dB
Excellent gain flatness
Multiple operating modes:
AGC adjustable Gain
APC output is adjustable
ACC voltage adjustable
Mid-stage access for DCM or OADM
Offset the insertion loss introduced by DCM
Reduce the additional degradation of system OSNR
Flexible insertion of DCMs at different distances
Optional OSC channel for remote management
MON port, on-line monitoring optical power and OSNR
Single fiber bidirectional EDFA amplifier include an Red and blue port,
Red optical amplifier include an blue out port and blue in port, Red optical amplifier Amplify red optical signal, blue out port and blue in port are used to access the amplifier to amplify the blue optical signal.
Blue optical amplifier include an red out port and red in port, Blue optical amplifier Amplify blue optical signal, red out port and red in port are used to access the amplifier to amplify the red optical signal, Blue: 1528nm~1543nm. Red: 1547nm~1561nm.
EDFA Optical Amplifier module provide multi-function, low noise, Erbium-Doped Fiber Amplifier (EDFA) solutions, The amplifier module can be operated at constant gain (Automatic Gain Control AGC), constant output power (Automatic Power Control, APC). Integrated VOA can be automatically adjusted to achieve smooth gain spectrum. It can amplify the C-Band signal with or w/o middle stage access (MSA), which brings great flexibility for the network application.
C-band optical signal overall amplification
Covering the wavelength range of 1528 ~ 1565nm
Support systems to achieve different cross-section radio repeater transmission
Wide operating wavelength range:1528nm~1565nm
Three Optical Amplifier C-Band applications:
Booster
ï??n-line
Pre-amplifier
Low noise figure: typical: 5dB
Excellent gain flatness
Multiple operating modes:
AGC adjustable Gain
APC output is adjustable
ACC voltage adjustable
Mid-stage access for DCM or OADM
Optional OSC channel for remote management
MON port, on-line monitoring optical power and OSNR
Many model options serve all the traditional amplifier applications in an extended optical link: booster, in-line, and pre-amplifier.
A booster amplifier operates at the transmission side of the link. It features high input power, high output power, and medium optical Gain . Boosters are designed to amplify aggregated optical input power for reach extension.
An in-line amplifier operates in the middle of an optical link. It features medium to low input power, high output power, high optical Gain , and a low noise figure. In-line amplifiers are designed for optical amplification between two network nodes on the main optical link.
A Pre-amplifier operates at the receiving end of an optical link. It features medium to low input power, medium output power, and medium Gain. Pre-amplifiers are designed for optical amplification to compensate for losses in a demultiplexer located near the optical receiver.
Some EDFA Models include an additional mid-stage port designed for insertion of a Dispersion Compensation Management (DCM) unit without its inherent insertion loss. The design of these models maximizes the DCM benefits to increase deployment flexibility. New placement options require fewer amplifiers in the link, and they can open the door to applications that were not possible with older technology.
Some EDFA Models include a Red and a blue port designed for Single fiber DWDM Solution. The design of these models is used for single-fiber DWDM transmission systems.
This transponder is a 10G fiber to fiber 3R converter repeater and transponder. This transponder supports SFP+ to SFP+ or XFP to XFP fiber connections. 1+1 Automatic optical line Protection Switching is supported for the Line ports. The transponder is protocol transparent, providing 3R (Re-amplification, Re-shaping and Re-clocking) between these different optical module types.
The modules enable an extremely wide range of optical infrastructure solutions including media conversion, signal repeating, lambda conversion, and Wave Division Multiplexing(WDM). Especially suitable for DWDM ring network protection. The redundant multi-rate dual transponder fit HT6000 Series CH04, CH08, CH20 Chassis.
SFP+ Multi-Rate Quad Transponder has 8 SFP+ slots, The device provides a flexible transmission of various protocols, such as 1G/10G Ethernet, SDH STM16/STM64, OTU1/OTU1e/OTU2/OTU2e, Fiber Channel 1/2/4/8/10, CPRI, etc. The SFP+ transponder supports multi-rate functionality with optical data rates from 1Gbps up to 10Gbps; The wide range of optical infrastructure solutions includes media conversion, signal repeating, lambda conversion.
Media conversion
Signal repeating
Lambda conversion
3R signal regeneration
Re-transmission
Re-shaping
Re-timing
Multi-rate supports 1Gbps ~ 10Gbps
Supports Loopback Test
Supports ALS, LFP
Flexible transmission of various protocols
Fiber Channel 1/2/4/8 /10Gbps
CPRI: 2/3/4/5/6/7
1G/10G Ethernet
SDH STM-4/16/64
The main field of application is CWDM and DWDM networks. As an intelligent transponder module, SFP+ Transponder converts a transparent data channel to a corresponding CWDM/DWDM wavelength.
By means of the implemented 3R functionality (re-amplification, re-shaping, re-timing) for signal processing, the module is also suited for the use as a repeater, The SFP+ transponder models fit HT6000 Series CH04, CH08, CH20 Chassis.
SFP28 Multi-Rate Quad Transponder has 8 SFP28 slots, The device provides a flexible transmission of various protocols, such as 100M/1G /10G/25G Ethernet, SDH STM1/STM4/STM16/STM64, Fiber Channel 1/2/4/8 /10/16/32Gbps, CPRI, etc.
The SFP28 transponder supports multi-rate functionality with optical data rates from 1Gbps up to32Gbps;The wide range of optical infrastructure solutions includes media conversion, signal repeating, lambda conversion.
Media conversion
Signal repeating
Lambda conversion
The main field of application is CWDM and DWDM networks. As an intelligent transponder module, SFP28 Transponder converts a transparent data channel to a corresponding CWDM/DWDM wavelength. The module is also suited for the use as a repeater,The SFP28 transponder models fit HT6000 Series CH04, CH08, CH20 Chassis.
