Our company has achieved milestone in providing a UHF RFID Reader to the clients. This product is a high performance device which can read and write all tags or cards in a long distance. This product is available for variety of read range requirements. This product is the system for passive UHF reading with medium range.
Features:
Robust
Linear Polarised
8 dbi antenna
optional with effect distance up to 6m*
Self-intellectual property
FHSS or Fix Frequency transmission
RF output power up to 30dbm(adjustable)
Support auto-running, interactive and trigger-active work mode
Low power dissipation with single + 9 DC Power supply
Support RS232, RS485, Wiegand interface
Application:
RFID Student Management System
RFID File Tracking System
RFID Vehile Tracking System
RFID Vehicle Parking System
RFID Warehouse Management System
RFID Truck Monitoring
RFID Library Management System
RFID Inventory Management System
RFID Jewellery Tracking System
RFID Physical Efficiency Test Management
RFID Waste Management System
RFID Asset Tracking System
RFID Access Control System
RFID Hospitality Management System
RFID Garment Tracking System
Other Information:
Minimum Order Quantity: 1 Piece
Optional Support:
We will provide SDK with the Product. Also Customized Software Development will be also Undertaken/ Supported
Our company has achieved milestone in providing a UHF RFID Reader to the clients. This product is a high performance device which can read and write all tags or cards in a long distance. This product is available for variety of read range requirements. This product is the system for passive UHF reading with medium range.
Features:
Robust
Linear Polarised
12dbi antenna
optional with effect distance up to 15m*
Self-intellectual property
FHSS or Fix Frequency transmission
RF output power up to 30dbm(adjustable)
Support auto-running, interactive and trigger-active work mode
Low power dissipation with single + 9 DC Power supply
Support RS232, RS485, Wiegand interface
Application:
RFID Student Management System
RFID File Tracking System
RFID Vehile Tracking System
RFID Vehicle Parking System
RFID Warehouse Management System
RFID Truck Monitoring
RFID Library Management System
RFID Inventory Management System
RFID Jewellery Tracking System
RFID Physical Efficiency Test Management
RFID Waste Management System
RFID Asset Tracking System
RFID Access Control System
RFID Hospitality Management System
RFID Garment Tracking System
Other Information:
Minimum Order Quantity: 1 Piece
Optional Support:
We will provide SDK with the Product. Also Customized Software Development will be also Undertaken/ Supported
Our products are highly appreciated among the customers for their high reliability, advance technology, hassle free performance, excellent finishing, less maintenance requirement, long service life and various other features.
Feature:
Electrical and mechanical interlocks prevent cross connection of power sources.
Quick change circuit board is easily replaced in the event of failure. No need to disconnect and reinstall the entire unit.
Time delay ensures generator voltage is at a stable level before transfer occurs. The time delay can be disabled when an inverter is used as the alternate source.
Rugged, heavy-duty, screw-type wiring terminals allow direct connection to contactor for more reliable operation.
Heavy Duty metal enclosure with easy to use wiring diagram permanently attached.
1 year limited warranty.
Features:
Electrical and mechanical interlocks prevent cross connection of power sources.
Quick change circuit board is easily replaced in the event of failure. No need to disconnect and reinstall the entire unit.
Rugged, heavy-duty, screw-type wiring terminals allow direct connection to contactor for more reliable operation.
Heavy Duty metal enclosure with easy to use wiring diagram permanently attached.
1 year limited warranty
7952 Computer Hardware Peripherals Suppliers
Short on time? Let Computer Hardware Peripherals sellers contact you.
Optical Line Protection (OLP) system is a new optical line protection subsystem developed with advanced technology of dynamic and synchronous optical switches. When communication quality is lower or equipment breaks down due to accidental fracture or bigger loss of optical fiber in the optical transmission line, the OLP system can switch the primary line to the secondary line within a short time, to ensure normal operation communication of line, which effectively prevent fiber or equipment fault and shorten the recovery time from hours to milliseconds.
Optical Line Protection switch provides both Manual and Automatic switching mode. In Manual mode, the system switches optical path only based on the commands from user.
In the Automatic mode, the system switches based on the power level detected and the preset threshold. Under automatic mode, the system can be set to be revertive or Non-revertive modes.
Under Revertive mode, the system switches back to the working path automatically after the fault condition is cleared. Under Non-revertive mode, the system does not switch back. The OLP models fit HT6000 Series CH04, CH08, CH20 Chassis.
EDFA Optical Amplifier module provide multi-function, low noise, Erbium-Doped Fiber Amplifier (EDFA) solutions, The amplifier module can be operated at constant gain (Automatic Gain Control AGC), constant output power (Automatic Power Control, APC). Integrated VOA can be automatically adjusted to achieve smooth gain spectrum. It can amplify the C-Band signal with or w/o middle stage access (MSA), which brings great flexibility for the network application.
C-band optical signal overall amplification
Covering the wavelength range of 1528 ~ 1565nm
Support systems to achieve different cross-section radio repeater transmission
Wide operating wavelength range:1528nm~1565nm
Three Optical Amplifier C-Band applications:
Booster
ï??n-line
Pre-amplifier
Low noise figure: typical: 5dB
Excellent gain flatness
Multiple operating modes:
AGC adjustable Gain
APC output is adjustable
ACC voltage adjustable
Mid-stage access for DCM or OADM
Optional OSC channel for remote management
MON port, on-line monitoring optical power and OSNR
Many model options serve all the traditional amplifier applications in an extended optical link: booster, in-line, and pre-amplifier.
A booster amplifier operates at the transmission side of the link. It features high input power, high output power, and medium optical Gain . Boosters are designed to amplify aggregated optical input power for reach extension.
An in-line amplifier operates in the middle of an optical link. It features medium to low input power, high output power, high optical Gain , and a low noise figure. In-line amplifiers are designed for optical amplification between two network nodes on the main optical link.
A Pre-amplifier operates at the receiving end of an optical link. It features medium to low input power, medium output power, and medium Gain. Pre-amplifiers are designed for optical amplification to compensate for losses in a demultiplexer located near the optical receiver.
Some EDFA Models include an additional mid-stage port designed for insertion of a Dispersion Compensation Management (DCM) unit without its inherent insertion loss. The design of these models maximizes the DCM benefits to increase deployment flexibility. New placement options require fewer amplifiers in the link, and they can open the door to applications that were not possible with older technology.
Some EDFA Models include a Red and a blue port designed for Single fiber DWDM Solution. The design of these models is used for single-fiber DWDM transmission systems.
Wireless Mouse IC V108 DIP8l 3-6 Buttons CPI 400/500/600/800 1000 (Default) /1200/1600
Signle power supply
Power range 1.7V -3.2V
Precision optical displacement prediction technology
Very good 2-D motion sensor
Support extremely fast moving speed
Maximum speed of movement 28 Inch/sec CPI
CPI: Maximum 1600
Once stop moving, immediately enter the energy saving model
Data transmission is achieved through serial interfaces
Built-in low power timer (LPT),sleep1/sleep2 models
The mouse can be awakened by the pin, and the sensor is controlled to wake up from the sleep mode.
Built-in oscillator
LED current-limiting resistance 68-470 Ohm(Determine by the actual plane),recommend 100 Ohm.
DIP8 package
Wireless Mouse IC Ka8 DIP8l 3-6 Buttons CPI 400/500/600/800/1000 (Default) /1200/1600
Model Number :KA8
Application :Camera
Supply Voltage :1.73V ~ 1.94V (VDD and AVDD short) 2.2V ~ 3.2V (VDD)
Type :Drive IC
Signle power supply
Power range 1.7V -3.2V
Precision optical displacement prediction technology
Very good 2-D motion sensor
Support extremely fast moving speed
Maximum speed of movement 28 Inch/sec CPI
CPI: Maximum 1600
Once stop moving, immediately enter the energy saving model
Data transmission is achieved through serial interfaces
Built-in low power timer (LPT),sleep1/sleep2 models
The mouse can be awakened by the MOTSWK pin, and the sensor is controlled to wake up from the sleep mode.
Built-in oscillator
LED current-limiting resistance 68-470 Ohm(Determine by the actual plane),recommend 100 Ohm.
DIP8 package
Wired Mouse IC V102 USB Interface DIP12L Dpi 400/800/1200/1600
Support USB
5V power supply
Compatible Microsoft 3D IntelliMouse and IBM mouse.
Support Microsoft OS, including Vista, XP, 2000, ME, 7,10 and so on
Accord with Microsoft WHQL and USB-IF
Support R/M/L key, Support mechanical Z shaft encoder
CPI: 1200/800, or dynamic transfer 400-600-800-1200-1400-1600
Sleep mode and Automatic wake-up function
Built-in power management
Built-in LED drive
High integration, very few peripheral components
Built-in oscillator
Meet ROHS
DIP12 package
Wired Mouse IC Mx8733b USB Interface DIP8l Dpi 1000
Optical Navigation Technology
Low-cost and powerful solution for low-speed USB combo mouse
Universal Serial Bus Specification, version 2.0
USB HID Specification, version 1.1
USB-IF and WHQL compliable
5V Power Supply
Power Saving During No Motion
On Chip LED Drive with Regulated Current
Crystal-less
Resolution 1000CPI
Low EMI radiation
Supports 3D (X, Y, Z) input
Supports 3 buttons and mechanical wheel encoding
Wireless Mouse IC Fh8811A with Receiver Sdip14 3-6 Buttons No Need Transmitter
Brand Name:None
Place of Origin:China
Model Number :FH8811A
Application :Camera
Supply Voltage :2.0V - 3.6V
Type :Drive IC
2.4GHz ISM band (2400~2483MHz)
Modulation method: FSK/GFSK
Gap rate: 500Kps, 1Mbps, 2Mbps
8dBm emission power
-88dBm reception sensitivity
Single end antenna feed
A single inductor network
Single crystal oscillation
Fast frequency hopping algorithm
15 meters transmission distance
High speed mobile detection up to 28 inches / second
Frame rate to 3000 frame frequency / second
Support three file resolution 1200 (default) /1600/800cpi
Built in low power sleep Sleep1/Sleep2/Power down mode
Supporting remote wake-up function
Good compatibility of computer host and operating system
Wide power supply voltage range 2.0V - 3.6V
3D6K:LBUTTON, MBUTTON, RBUTTON, KEY4, KEY5, DPI
Power dynamic control technology and power management
Support off-line detection
Compliance with safety regulations
Support button wake-up mode
Ultra low power consumption of about 4.0mA (excluding LED current typical)
Wired Mouse IC Fh8832A USB Interface DIP8l Dpi 1000
Brand Name:None
Place of Origin:China
Model Number :FH8832A
Optical Navigation Technology
Low-cost and powerful solution for low-speed USB combo mouse
Universal Serial Bus Specification, version 2.0
USB HID Specification, version 1.1
USB-IF and WHQL compliable
5V Power Supply
Power Saving During No Motion
On Chip LED Drive with Regulated Current
Crystal-less
Resolution 1000CPI
Low EMI radiation
Supports 3D (X, Y, Z) input
Supports 3 buttons and mechanical wheel encoding
Wireless Mouse IC Ms8310 with Receiver Sdip14 3-6 Buttons No Need Transmitter
Brand Name:None
Place of Origin:China
Model Number :MS8310
Application :Camera
Supply Voltage :2.5V~2.9V
Type :Drive IC
Single power supply
Auto matching
Support left / Center / right /B4/B5 key, mechanical Z shaft encoder
