Find Verified Personal And Entertainment Suppliers, Manufacturers and Wholesalers

Trade name : sodium molybdate dihydrate
Formula : na2moo4.2h2o
Cas no.: 10102-40-6
Hs code : 2841.70
Physical description/ properties
Mol weight : 241.948
Appearance : white powder or colourless crystalsr
Odour : odourless
Melting point : 687 degree c (sodium molybdate dihdrate loses hydration water above 100 c (212 f)
Boiling point :
Solubility in water : 67 g /100 cm3 at 25 degree c
Density : 3.28 (anhydrous)
Quality index
Purity: 99% min
Mo: 39.3% min
Pb: 10 ppm max
As: 10 ppm max
Cd: 10 ppm max
Application
Metal finishing, agriculture, water treatment, color pigments, antifreeze, food supplements, corrosion control and fire inhibition.



25kgs/pp woven bags or 1000kgs/pp jumbo bag

Copper sulphate monohydrate

Formula : cuso4.H2o
Cas no.: 10257-54-2
Hs code : 2833.25
Physical description/ properties
Mol weight :
Appearance : blue or green white powder.
Odour : odourless
Melting point : 110 degrees c above 100 degrees c, copper sulfate loses water from crystallization with formation of the monohydrate
Boiling point : 653 degree c
Solubility in water :
Density :
Quality index
Cu : 34% min
As : 20 ppm max
Cd : 20 ppm max
Pb : 20 ppm max
Application
Copper(ii) sulfate is a desiccant.
Copper sulfate is a commonly included chemical in children's chemistry sets and is often used in high school crystal growing and copper plating experiments.

Packing :


25kgs/pp woven bags or 1000kgs/pp jumbo bag

Dicumyl peroxide

Dicumyl peroxide (dcp) mainly provides as cross-linking agent for various polymers and copolymers, such as pe, eva, cpe, epdm, epr, silicon rubber, polyurethane rubber, as well as the polymerization initiator for ps. It is also the curing agent for unsaturated polyester.
After crossing linking of dcp, the physical properties of polymer can be improved, for example, cross-linked pe improves its resistance to heat, chemical, pressure and cracking, and increase mechanical strength as well.
Dcp manufactured by our factory can be used widely in architectural decoration materials, wire and cable, plastic foams and other products of plastic and rubber.
Formula: c6h5(ch3)2cooc(ch3)2c6h5
Appearance: white crystals(99%)


Net weight: 20kgs in one carton

Product name: barium chloride dihydrate
Molecular formular: bacl2*2h2o
Properties: white crystals; bitter taste; poisonous. Soluble in water; slightly soluble in alcohol; insoluble in ether.
Item Index (%)
Content 98.0 min
Ca 0.09 max
S 0.008 max
Fe 0.003 max
Water insoluble matters 0.10 max.

Uses: refining brine in caustic soda electrolysis (purification of brine), metal heat treatment, pigments, ceramics, medicine, insecticide, manufacturing other barium salts, tannage, softening agent etc. Exactly used in the cotton reverting dyeing, leather industry, pesticide, fabric dyeing, mordant, water softener, steam antiscale, paper making, lake toner, extinction of rayon.

Widely used aqueous and solvent-based exterior paints, electro-deposition paints, plastics, rubber, printing ink, high quality paper, waxed paper and leather finishes, cosmetics, glass, soap and plastic production.

Rutile properties:
1) Tio&sub2; Content: 94% min.
2) Specific gravity: 4.1g/cm
3) pH: 6.5-8.0
4) Oil absorption (g/100g): 19-21
5) Resistance: 85om
6) Retained on 325 mesh: 0.02% max.

Anatase properties:
1) TiO&sub2; Content: 98.0% min.
2) Color (compared with standard product): Not lower than tint-reducing power>= 100
3) Volatiles 105% (m/m): =< 0.5
4) Water soluble % (m/m): 0.5
5) pH of aqueous suspension: 6.5-8.0
6) Oil absorption: 26g/100g
7) Residue on sieve of 5micron, % (m/m): 0.1
8) Water extract resistance: 20om


Inner packing
1) 25kg/kraft paper bag with PE liner
2) 600kg/PP jumbo bag.

Sebacic acid

With the successful technology and advanced technics from home and abroad, we make an improvement in our sebacic acid products and thus the high quality, lower consumption and environmental protection can be guaranteed. We have established technical assistance cooperation relations with academies and scientific research institutes in china . A preliminary achievement has been made to deepen the research and development on products by the assisting units superiority in technology and talents. We will become the largest sebacic acid production enterprise for high quality, reasonable price and large varieties in the world.We warmly welcome friends and circles from the world to visit and establish extensive technology and business cooperation with us.



500kg/25kgs/1000kgs/750kgs

Triclosan usp 26
50 tons/month ; conforms to usp26 ;usd $ 15000/ton ; fob tian jin, china new port ;
Physico-chemical properties:
1. Chemical name: 2, 4, 4'-trichloro-2'-hydroxy diphenyaxide ;
2.Cas number : 3380-34-5
3. Iupac [5-chloro-2-(2, 4-dichorophenoxy) phenol ]
4chemical formula: c12h7cl3o2
Specifications:
Identity (ir): ir conforms to standard, conform
Identity (gc rt): retention time of major peak conforms to standard conform
Physical description : crystalline powder
Color : white to off-white
Identification : hplc ; g-c / ms
Assay (as c12h7cl3o2), % : 99.6 min
Melting point, fpc : 57 f+ 1
Residue on ignition %: <0.1
Heavy metals(as pb) % : < 0.001
Loss on drying, % : < 0.1
Individual related compounds %: <0.1
Total related compounds %: <0.5
Organic impurities:
3-chorophenol +4- chlorophenol <10ppm
2, 4-dichlorophenol <10ppm
2, 8-dichlorodibenzofuran <0.25ppm
2, 8-dichlorodibenzo-p-dioxin< 0. 5ppm
2, 4, 8- trichlorodibenzo furan <0.25ppm
1, 3, 7-trichlorodibenzo-p-dioxin < 0.25ppm
2, 3, 7, 8-tetrachlorodibenzofuran <1ppt
2, 3, 7, 8-tetrachlorodibenzo-p- dioxin <1ppt
4, 4-dichloro-2-hydroxy-diphenylether : 0.1% max.
Tcdd tox equrivalent: <1ppt

Packing: in net weight 25kgs paper drums with inner plastic bags.

25 kg card drum

Molded graphite

1)Grain Size: 0.08mm with the Density: 1.77-1.85g/cm3
Size: Rectangle: 200x200x65 (55íó80) íó 300x200x120 (100) íó130x120x35íó280x135x110íó
300x135x110íó310x310x150(140) íó390x130x100(80) íó330x260x120(150) íó340x250x120íó380x280x150(200) íó420x135x120(140) íó430x255x125(150) íó430x125x125íó450x200x150íó490x300x180íó500x400x200íó650x210x150íó
550x260x150íó550x370x200íó800x230x320
Round: Dia.60x100íóDia.100x100íóDia.110x180íóDia.110x240íóDia.125x240íóDia.135x135íó
Dia.150x130íóDia.160x240íóDia.190x120íóDia.210x240íóDia.260x240íóDia.305x260íó
Dia.330x240íóDia.330x260íóDia.320x300íóDia.260x300íóDia.400x300íóDia.450x400
EDM-I4 Density:1.80g/cm3 Grain Size: 0.021mm
Applycation:Die Casting Moulds, Plastic Moulds, Forge Moulds EDM.
Circular Size: Dia. 350x450mm, Dia. 400x450mm, Dia. 450x450mm, Dia. 500x450mm, Dia. 585x600mm
Rectangle Size: 400x400x400mm, 400x400x500mm, 400x400x600mm, 900x540x260mm
Note: Above usages are only reference for you.Various specification and properties of Isostatic Graphite can be produced according to customerí»s requirements.

Paper products
With a mission to offer innovative packaging solutions, through value driven management, online graphics private limited took the lead in offering the services, in a "one-stop facilities" infrastructure. Online graphics is an amalgamation of excellence in design and manufacture, and emphasizes on ushering new standards in high precision.
Our range includes single colour to full colour folding cartons, visual aids, catch covers, paper labels, self adhesive labels, full colour flyers, danglers, brochures, posters, calendars and all other promotional materials. We also supply handmade paper, art paper, duplex board, craft paper and craft board in bulk quantities.

1.Reliable Insulation:
We make this kit with imported raw materials liquid silicone rubber, which has excellent characters of elasticity and insulation.
2.Simply Installation:
All the kits are pr-moulded in factory; anyone unskilled can easily complete the installation. Needs no fire, save time.
3.Widely Application:
Anti-dirtiness, aging-resistant, waterproof, excellent cold and heat-resistant character, suit for high altitude, cold, dankish, salt fog and heavy-polluted areas. Special suit for the petroleum, chemical plants and mine.
4.Advance equipment:
The imported equipments have high automatism and reliable properties.
5.Excellent Appearance:
With longer Cold shrinkable tube, no commissural line. And smooth surface.

Polydadmac

This product's technical name is polydimethyl-dislkelen-ammonium chloride/polydadmac, it is cationic polymer and it can be completely dissolved in water.
Properties
The polymer body contains strong cationic group radical and activated-adsorbent group radical which can destabilize and flocculate the suspended solids and the negative-charged water soluble matters in the waste water through electro-neutralization and bridging adsorption. It is very effective in flocculating, decolouring, killing algae and removing organics. The product enjoys small dosage but can cause big flocs, rapid precipitation and low turbidity residue, and it can also produce small amount of sludge. It is adaptable to wide range of ph value, between 0.5 and 1.4. This product is smelless, tasteless and harmless. It can be widely used to treat source water and sewage water.
Specifications
1. Appearance: colorless, transparent colloid
2. Molecular weight: 4f- 105 min.
3. Solid content: 40%
4. Ph, 30% solution: 3-6
5. Ionic nature: cationic
Application methods
When used alone, it should be diluted to the concentration of 0.5%-0.05% (based on solid content). When used to treat different source water or waste water, the dosage is based on the turbidity and the concentration of the water. The most economical dosage is based on the trial. The dosing spot and the mixing velocity should be carefully decided to guarantee that the chemical can be mixed evenly with the other chemicals in the water and the flocs can not be broken. It is better to dose the product continuously.
Package and storage
1. It is harmless, no-flammable and non-explosive, it can be stored at room temperature, it can not be placed in the sun.
2. It is packaged in plastic drums with each containing 25kg, 50kg, 125kg and 1000kg.



It is packaged in plastic drums with each containing 25kg, 50kg, 125kg and 1000kg.

Molecular formula: HCOONa
Properties: Density 1.429g/cm3,melting point 253íµ, soluble in ethanol, nontoxic, noncorrosive, with reducing performance, capable of reacting with strong oxidizing agent, freely slaked in air.
Appearance: white Granule or Crystalline Powder
Specification:
Main content: 97% min
NaOH: 1.00% max
Na2C03 : 1.00% max
NaCl: 1.00% max
Na2S: 0.05% max
Water: 0.5% max


Package: in 25kg plastic woven bag with inner polythene bag

Appearance White Powder
Molecular Weight 631
Specific Gravity 1.095
Moisture , % 1.0 Max.
Melting Point 120 (+/-) 5 Degree C
Particle Size -200 Mesh
Bulk Density, Gm/CC 0.20 (+/- 0.03)
Zinc content (as ZnO), %13.0 min
Purity , % 99.0 min
Free Fatty Acid , % 1.0 Max.
Iodine Value of Separated Fatty Acid 3.0 Max.
Packing 25 Kg. HDPE bags with LDPE liners
Suggested Application -In cosmetics like face powder & pharmaceuticals to improve properties of smoothness & adhesion.
-In paints.
-In plastic & rubber processing.



25 Kg HDPE bags with LD liner.

Working frequency:
1-100mhz
Technical parameters:
Characteristic impedance: 100ía15ª+ (1-100mhz)
Nominal velocity of propagation(nvp): cmx, cm, cmr,
Lszh 69%; cmp 72%
Maximum mutual capacitance: 5.6nf/100m
Maximum capacitance unbalance: 330pf/100m
Maximum dc resistance: 9.38ª+/100m
Maximum resistance unbalance: 5%
Maximum propagation delay skew: 30ns/100m
Maximum propagation delay: 536ns/100m100mhz
Minimum bending radius: 10 x overall diameter
Voltage rating: 80v rms
Maximum pulling load: 80n
Working temperature: -5íµ ~+50íµ
Storage temperature: -20íµ ~+60íµ
Flame retardancy: ul 1581 (cm jacket); ul 1666 (cmr jacket); ul 910 (cmp jacket); iec 60332-1(frpvc
& lszh jacket); iec 60332-1 and iec 60332-3c (lsfroh jacket)
Product highlights:
Provide excellent bandwidth beyond 100 mhz.
Meet the strict flame retardancy and environmental requirements in europe and us.
Different jacket materials available for choice.
Guaranteed acr value > 0 db 200 mhz.
Special purpose cables can be offered according to customer request.
Different jacket color options available for choice.
í=transmission properties:
Freq: 350;
(mhz)


Roll , box , drum

99.9% niobium sheet
1.Purity:99.9%
2.Purity:8.7g/cm3
3.Iso9001:2000
4.Standard:astm b394-98

99.9% niobium sheet

Standard: astm b393-98
Size: thk:0.1-10mm, w:1200mm(max), l:1500mm(max)
Purity:99.9-99.95%

Table.1 :chemical composition:
Chemistry ppm
Designation chief component impurities maximum
Nb ta si ni w mo ti fe o c h n
Nb1 remainder 700 50 50 50 30 20 50 150 40 15 30
Nb2 remainder 1000 80 40 100 100 40 80 180 60 15 50

Table 2. Mechanical requirements (annealed condition)
Grade tensile strength ¦äbpsi (mpa), ¡ý yield strength ¦ä0.2, psi (mpa), ¡ý elongation in 1"/2" gage length, %, ¡ý
Ro4200-1 ro4210-2 18000 (125) 12000 (85) 25
Special requirements to be agreed on by the supplier and buyer of negotiations
Applications:it's widely used for steel, ceramics, electronics, nuclear energy industries and superconductor technology.

Packaging detail: standard export package or as request
Delivery detail about 20 days.

1.Property:Nonpoisonous tasteless white powder,Chemical properties are stable and specific area can be controlled.

2.Uses:applied in all kinds of structure ceramics,electronic,electronic ceramics,senstitive ceramics,biological ceramics,high-grade fireproofing,partes of machine cutting tools,watch shell,joint of litht fibre,solid fuel battery and so on.


Packing:Drum with plastic liner bag.
Net weight 20kg/drum.

Sinoflon fep-data sheet

Fep resin for wire, cable, tube, film and hose, etc.
Perfluorinated ethylene-propylene (fep) for wire and cable is the copolymer of tetrafluorothylene (tfe) and hexafluoropropylene (hfp) with excellent thermo-stability, outstanding chemical inertness, low friction coefficient, distinctive air aging resistance, vapor penetrating resistance, non-inflammability and superior electrical insulation. It is nearly stabilized in rather wide ranges of temperature and frequency. And it can be widely used as wire and cable in the field of aircraft, spacecraft, communication, computer, electricity instrument, high buildings and high temperature up to 200µ for a long time, etc, due to its excellent interruption & shielding resistance to communication signals. The thermoplastic process techniques can be used to fabricate useful products from fep.
Specification¦
Itemsindex
Ew-1ew-2ew-3ew-4ew-5
Appearanceclean semitransparent pellet
Melt flow rate
G/10min2.1~4.04.1~8.08.1~12.012.0~20.020.1~27.0
Tensile strength
Mpa²2521201818
Elongation at break
%²300300300280288
Melting pointµ265a10265a10265a10255a10255a10
S.S.G2.12~2.17
Volatile %0.10
Thermo-stress craze resistancevery goodvery goodgood
Volume resistance
ª+&8226;cm11016
Breaking down
Voltagekv/mm20~24
Dielectric constant
106hz2.10
Dielectric loss
Tangent106hz3.010-44.010-4
Purposesthick layer wire and cable wire and
Cable for general purposethin layer wirewire by
High-speed excursionthin layer wire by high-speed excursion
Package, storage & transportation¦packed in plastic bag with net weight 25kg per bag, and should be stored in clean and dry warehouses to avoid pollution from impurities. The processing temperature should be below 400µ to avoid releasing toxic gases.


Packed in pvc bags with net weight 25kg per bag.

Cas 9003-01-4
Properties:
Paa(polyacrylic acid) is innoxious and soluble in water, it can be used in situations of alkaline and high concentration without scale sediment. Paa(polyacrylic acid) can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. Paa(polyacrylic acid) is used as scale inhibitor and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc.
Specification:
Appearance Colorless or light yellow transparent liquid
Solid content % 30 min
Free monomer (ch2=ch-cooh) % 0.5 max
Density (20 centigrade)g/cm3 1.09 min
Ph(1% solution) 3.0 max
40%, 50% paa(polyacrylic acid) are also supplied.


Usage:
Paa(polyacrylic acid) can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 1-15mg/l is preferred.
Package and storage:
Normally in 200kg net plastic drum, ibc drum can also be used as required. Storage for one year in room shady and dry place.

Ferro sulphur

Sulphur- 25-30%, fe- the balance , impurities- nil


1000kgs bags or as required by buyer.

mp 65 °C
bp 218-220 °C(lit.)
Fp 218-220°C
storage temp. 0-6°C
Water Solubility <0.1 g/100 mL at 20 ºC
Merck 143,073
BRN 1447806
Stability: Stable. Combustible. Incompatible with strong oxidizing agents, acid chlorides, acid anhydrides.
CAS DataBase Reference 87-65-0(CAS DataBase Reference)
NIST Chemistry Reference Phenol, 2,6-dichloro-(87-65-0)
EPA Substance Registry System Phenol, 2,6-dichloro-(87-65-0)
Hazard Codes C,Xi,T,F
Risk Statements 34-36/38-39/23/24/25-23/24/25-11
Safety Statements 26-27-36/37/39-37/39-45-36/37-16
RIDADR UN 2020 6.1/PG 3
WGK Germany 2
RTECS SK8750000
Hazard Note Harmful/Corrosive
HazardClass 6.1
PackingGroup III
Hazardous Substances Data 87-65-0(Hazardous Substances Data)
Chemical Properties white or light purple crystals.