Plastic-sprayed aluminum alloy accessories
Product description:
1. Install PU Sandwich wall panel/Metal carved board/Metal siding wall panel.
2. Beautiful, easy to install, durable material, seamless, no rust.
3. Color no change, strong strength, lightweight.
4. Plastic sprayed aluminum alloy material.
Installation:
Step 1: Preparation
When the metal carving board and its accessories are ordered to the site, you need to prepare the installation of the plate and accessories tools, mainly expansion screws, dovetail nails, pistol drill, gas nail gun, marker, tape measure, rubber hammer, and cutting machine.
Step 2: Install the accessory base
Before installing a metal carved plate, the base of plate accessories should be installed first. There will be starting parts, closing parts, edges, seams, and internal and external corners.
Step 3: Install the plate
after installing the base of the accessories, then install the first piece of metal carving board horizontally from top to bottom, and all the plates must be female mouth down male mouth up. after the first piece of plate is installed with a screw or nail dovetail should be fixed on the wall (suggest every 60 cm distance is fixed a nail), then the mother of the second board mouth to aim at the first board of the mouth and down tight, at the same time with a rubber hammer of tapping two boards interface to ensure that the joint of two boards enough heads, The second board can then be fixed to the wall with expansion screws or dovetail nails, and the other boards can be installed in the same way.
Step 4: Install the fitting cover
after all, the metal carved plates are installed, press the cover plate of the fitting firmly on the base. If it is the same material accessories, you can use screws fixed on the wall, and finally sealed with waterproof glass glue.
Three Color Bluestone Brick PU Sandwich Wall Panel
Product description:
the surface of the metal carved board/panels(metal engraved board/panels) is a high-quality metal plate overcoating with colored relief after special coating treatment, the middle layer is a hard high density polyurethane foam thermal insulation layer treated by flame retardant treatment, the underside is the aluminum foil protective layer which plays the role of thermal/heat insulation and moisture-proof.
the wall panel has the characteristics of thermal insulation, waterproof and flame-retardant, light earthquake resistance, sound insulation and noise reduction, green environmental protection, beautiful and durable, and the assembly method of the board body is simple, convenient construction, and it is not limited by the season or environment, the four seasons are appropriate.
Structure:
Material of surface: the outer layer is a metal layer, which is pressed by a galvalume steel sheet (Containing 55% aluminum, 43% zinc) and is not rusted all year- round. the steel coating is coated with high-quality Nippon paint, which is durable and does not fade.
Core material: the hard high-density polyurethane foam thermal insulation layer treated by flame retardant treatment, set heat preservation, fire-proof, moisture-proof, high hardness in one, which is incomparable with ordinary foam polyurethane.
Material of bottom: the back of the metal carved board is the aluminum foil protective layer with excellent water-proof performance, which can effectively block the intrusion of water vapor into the board and build a wall, and reflect the heat source of the house to enhance the heat preservation effect.
Advantage:
1. Heat preservation and heat insulation
2. Fire and flame retardant
3. Waterproof and moisture-proof
4. Sound insulation and noise reduction
5. Efficient construction
6. Environmental protection and durability
7. Shock resistance and crack prevention
8. Strong decoration
PS acoustic glass wool wall panels are glass wool based-panels pre-decorated. They are manufactured from high density resin bonded fiberglass wool with a wide range of standard fabric colors facing, plain tissue backer and sealed and painted edge. Main advantage of these wall panels are excellent sound absorption, dimensionally stable under high temperature and humidity, remarkable thermal insulation property and energy saving material.
PS acoustic glass wool wall panels are glass wool based-panels pre-decorated. They are manufactured from high density resin bonded fiberglass wool with a wide range of standard fabric colors facing, plain tissue backer and sealed and painted edge. Main advantage of these wall panels are excellent sound absorption, dimensionally stable under high temperature and humidity, remarkable thermal insulation property and energy saving material.
Environmental protection and safety, rich performance, simple and fast installation, low transportation cost, bendable, fireproof, waterproof, Super-duper thinness and lightness, it has morre development space than traditonal materials. It applies to interior and exterior wall.
1. We got largest panel market share in Asia. (400 milion USD Annual)
2. We are listed on korean stock market.
3. All in one service, SY got it's own R&D facility and Engineering support team
4. We assure you of quality. SY got QA/QC.
5. We are experienced on various projects.
FRP composite panel is composed of two layers of FRP panel and core materials,has very good insulation performance,very light weight and very high strength.More convenient installation can be achieved by embedding pipe fitting.
Surface of FRP skin can be high glossy, mat, woven roving, plaid and bubble, the back side can be smooth and rough. Core materials could be Polyurethane (PU), Extruded Polystyrene (XPS), Expanded Polystyrene (EPS), Polypropylene (PP) honeycomb, and plywood, etc.
Surface Material: High quality unsaturated polyester resin, PET film, gel coated resin.
Padding material: XPS(Extruded Polystyrene)foam.
Thickness: 20mm-200mm.
Width: Less than 3000mm, usually less than 2250mm( easy for packing in container)
Length: less than 10000mm.
Application:
Motor homes and caravans: construction of panels for external walls, doors and lockers.
Commercial vehicles: construction of panels for internal and external walls and doors.
Buses: construction of internal and external walls.
Refrigerated vehicles: construction of panels for internal and external walls and doors.
Cold rooms: construction of panels for internal and external walls and doors.
Produt Description:
 1> Grooved acoustic panel is a kind of slit resonance absorption  material which is made from high density
 panel with grooves on the surface and perforated holes at the back  side.
 2> It has strong selection on the sound spectrum and particular great  performance on the middle and low frequency.
 3> It has better sound absorption effect on medium and high frequency  if there is sound absorption cotton filled at the back side cavity..
 4> The design can be custom made
 5> How to calculate the perforated rate:
    1) When the hole line up in square P=0.785*(D/B)m2
    2) When the hole line up in Equilateral triangle
       P=0.907*(D/B)m2
    P ----- Perforated rate(%)
    D ----- Diameter of the hole
     B ----- Distance between two center of the holes
1>Â Â The grooved acoustic panel is made of high quality MDF board.
2>  According to the customer?s acoustic and decoration requirement, our MDF board can equipped with outstanding environmental, flame retardant and waterproof function, even can with various colors and
finish choices.
3>  Our grooved acoustic panel?s highest fire retardant grade can reach A2(GB) grade, and the best environmental protection can reach E1(GB) grade.
4>  Grooved wood acoustic panel structures? finish including: Melamine, Natural veneer, Anti-fire plate, Paint, Metal sheet, Artificial veneer and leather etc.
5>  Acoustic tissue including: The black color and attached at the back side of acoustic panel tissue, has fire retardant and sound absorption function.
About Tiange
Foshan Tiange Acoustic and Deco Materials Co.,Ltd.
*The Biggest Manufacturer of Producing Acoustic Panels,Movable partition and Soundproof Products in China.
*To provide Designs,Materials,Engieering Whole System Supplier.
*For The Global 90 Million User to Provide Quality Services.
*Main Products:Grooved wood acoustic panel,Perforated wood acoustic panel,Movable partition,Acoustic QRD Diffuser diffuser,Fabric acoustic panel,Space sound absorber, Polyster acoustic panel,Acoustic wall panel,wood wool acoustic panel, Acoustic ceiling, Â
Soundproofing insulation material, acoustic soundproof , sound absorption panels and relative acoustic accessories.If you want to know more informations,we are online waiting you, Thank you!
Javorest thatch panel is made from the same high quality thatch. This panel measures Brown Cogongrass | 100cm 70cm* (L W) | Bamboo Clipping | Coated with Anti-termite Liquid
* Product Dimension can be adjusted on order
perfect for outdoor projects. Thatch panels have been expertly hand-woven by island natives to ensure quality and customer satisfaction.
Build island inspired palapas, gazebos, beach umbrellas, tiki bars, and more with our economically priced panels. The natural golden and tan colors compliment any decor theme and provide an organic look to your home or business setting.
Java thatch products are handwoven and made from natural materials. for the question how long will my Java thatch last? The answer unfortunately, is that it really depends on a number of factors,which is the main one is the climate. In dry, moderate climates java thatch can last approximately 3-5 years.� In harsher climates that experience heavy rains, high humidity and drastic changes in climate it will be significantly shorter (approximately 1-2 years). Due to this and other external factors we cannot guarantee the life of these products.
2.Dimensions: 2270x610x50/60/75/90/100/120/150/180mm
50/60mm used for roof.
75/90mm used for floor or simple partition.
100/120mm used for internal wall
120/150/180mm used for external wall.
2.Dimensions: 2270x610x50/60/75/90/100/120/150/180mm
50/60mm used for roof.
75/90mm used for floor or simple partition.
100/120mm used for internal wall
120/150/180mm used for external wall.
3.Advantages as below:
Lightweight--1� person� can carry� panel easily
Eco-friendly--100%� non-asbestos
Fast Construction--3� workers� can� install 60-80m2 per day
Strong,Durable, Long Lifespan--70� years
Sound Insulation--42-46dB
Windproof--65m/s
Fireproof--4 hours
Anti-earthquake--Grade 8-9
Best hanging force--Single point hanging force is 50kg
Weight capacity--650kg / square� meter
Compressive strength--3.5 Mpa
Hanging force--1000 N
4.Packing
Free packing --with normal pallet and packing belt or plastic thin film
Creat a cool ,noticeably modern design with KOREA HYUNDAI PET film which created a true metal surface in both natural aluminum and brushed stainless steel finishes . The metal surface bonded to a melamime board core using PUR-HOT-MELT adhesive .Â
Surface KOREA HYUNDAI 0.45 PET Â
Core High quality melamine mdf /particle board or plywood
Back White / matching color melaine , same color PET sheet
Size 4*8 FT ,4*9FT ,4*10FT Â Â Thickness :3-36mm
Adhesive Germany KLEIBERIT PUR -HOT -MELT-ADHESIVE
Color Metal aluminum PET SHEET
Application Kitchen cabinet , wardrobe and commercial furnitureÂ
Advantages of Metal brushed PET surface panels
1. Cool touch technology
2. Noticeably modern design
3. Stain-resistance :surface with coating which is stain resistance
4. Eco-friendly :PET is eco-frienly material which is no toxic gas released
5. Scratch resistance :Hardess over 2H ,No scratches
6. Heat and humidity resistant
No delamination  ,break resistance
More information can view here.
