The 16-port 10 Gigabit Ethernet module provides up to 130 10 Gigabit Ethernet ports in a single Cisco Catalyst 6500 chassis and 260 10 Gigabit Ethernet ports in a virtual switching system (VSS) and is targeted for LAN campus aggregation and data center access, where fan-out and port density are very important. It consists of 4 port groups of 4 ports each. Users can operate each port group in either oversubscription mode (2 to 4 ports used per port group) or performance mode (1 port used per port group), allowing maximum flexibility for using some ports for connection to servers in performance mode and some other uplinks to wiring closets in oversubscription mode. When in performance mode, up to four 10 Gigabit Ethernet ports can be used to create a virtual switch link in a VSS.1 In addition, the 16-port 10 Gigabit Ethernet module has reduced power consumption. It uses half the power per port compared to the 8-port 10 Gigabit Ethernet module, providing substantial power savings to the customer.
Features:
-Support HD video 1080p and PC 1920 x 1080 @ 60Hz resolution.
-Based on Gigabit IP Ethernet, all standard -Gigabit or Fiber LAN switches can be used for inter-connection. Easy cabling, easy installation, and easy maintenance.
-Support One-to-One (Uni-Cast) and One-to-Many (Multi-Cast) applications.
-Support 4 x USB over IP devices for the KVM extension, you can attach keyboard, mouse, storage, speaker, microphone at the Receiver site to control the PC at the Transmitter site.
-Built-in USB sound card, you can directly connect speaker and microphone on the Receiver.
-Both HDMI and VGA Receivers are available, it is possible to mix HDMI Transmitter with VGA -Receiver in the same network.
-Support IR and RS232 options, you can use the IR remote controller at Receiver site to control the set-top box at the Transmitter site.
-Support remote ON/OFF option, you can remote switch ON/OFF at the Receiver site to the PC at the Transmitter site.
-Pure hardware design, plug-and-play, no additional software installation is required.
-Windows based Management Software is available for TX/RX connection management.
Material: Metal
Weight: 625 g
Dimension: 191x122x35 mm.
Number of Ports: 2
Fast Ethernet Port: Yes
Interfaces/Ports: 2 x RJ-45 10/100Base-TX LAN
Interfaces/Ports: 1 x Auxiliary Management
Interfaces/Ports: 1 x Console Management
Interfaces/Ports: 1 x USB
Cisco CISCO1841 I/O Expansions
Number of Expansion Slots: 3
Expansion Slots: (2 Total) Expansion Slot
Expansion Slots: (1 Total) AIM
LKV384 converts HDMI to Component Video (Y-Pb-Pr) and stereo audio. It allows you to enjoy your high definition image & sound when watching movies or playing games on the older component TVs or projectors that dont have an HDMI input.
It offers solutions for digital entertainment center, HDTV retail and show site, HDTV, STB, DVD and Projector factory, noise space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.
This LKV352 VGA TO HDMI converter is designed to take video and audio signal from PC or Laptop and upscale it to digital HDMI output of wide-range HDTV and PC resolutions, up to 1080p. Plug and play, no software is needed. Great for connecting the VGA video output of your computer or media server and integrating it into a new digital HDMI Home Theater System.
LKV381 is designed to convert HDMI to either Composite Video or S-Video. It allows the devices only equipped HDMI output to be connected to CRT TV. It is mostly applied in AV equipment testing, CCTV monitory, HD PC to TV, DV to Projector, Education, business promotion, etc.
Cisco WS-C2960G-24TC-L Interfaces/Ports :
Number of Ports: 20
Gigabit Ethernet Port: Yes
Interfaces/Ports: 4 x RJ-45 10/100/1000Base-T Uplink
Interfaces/Ports: 1 x RJ-45 Console Management
Interfaces/Ports: 20 x RJ-45 10/100/1000Base-T LAN
Products: Status Stock
Ports: 48
Transmission Rate: 10/100/1000Mbps
Function : POE, VLAN Support
Communication Mode: Full-Duplex & Half-Duplex
Brand Name: CISCO
Model Number: Cisco Catalyst 2960 series
Original: New
Minimum Order Quantity: Negotiable Trial Order
Minimum Order Quantity: 1 Piece/PiecesTrial Order
Port: Hong Kong
Packaging Details: New sealed.CISCO Original package. Carton.
Delivery Time: Within 1 to 3 business days after receipt of payment.
Manufacturer: Cisco
Part Code: WS-C3560E-48TD-E
Condition: NIB
Warranty: One year
100% genuine cisco WS-C3560E-48TD-E
Cisco Catalyst 3560-E series is an enterprise-class line of standalone access and aggregation switches that facilitate the deployment of secure converged applications while maximizing investment protection for evolving network and application requirements. Combining 10/100/1000 and Power over Ethernet (PoE) configurations with 10 Gigabit Ethernet uplinks, the Cisco Catalyst 3560-E series access switches enhance worker productivity by enabling applications such as IP telephony, wireless, and video. Cisco Catalyst 3560-E series aggregation switches deliver secure non-stop unified network services and versatile connectivity in a one rack-unit (1-RU) form factor for space and power constrained environments, enabling businesses to reduce total cost of ownership while maximizing investment protection.
Product Description : Cisco Catalyst 3560E-48TD-E - switch - 48 ports
Device Type: Switch
Form Factor :Rack-mountable - 1U
Dimensions (WxDxH) : 44.5 cm x 46 cm x 4.5 cm
Weight: 8.6 kg
RAM :128 MB
Flash Memory : 64 MB
Ports Qty : 48 x Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T
Data Transfer Rate: 1 Gbps
Data Link Protocol : Ethernet, Fast Ethernet, Gigabit Ethernet
Empty Slots : 2 x X2
Remote Management Protocol : SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, SSH-2
Communication Mode: Half-duplex, full-duplex
Features:
Full duplex capability, Layer 3 switching, Layer 2 switching, auto-sensing per device, IP-routing, DHCP support, auto-negotiation, trunking, MPLS support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, manageable, IPv6 support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), Time Domain Reflectometry (TDR)
Product Description:
SIMCom presents an ultra compact and reliable wireless module. The SIM900 Quad-band GSM/GPRS module is part of SIMComs new Surface Mount Technology (SMT) series, allowing you to benefit from small dimensions and cost-effective solutions.
Featuring an industry-standard interface, the SIM900 delivers GSM/GPRS 850/900/1800/1900MHz performance for voice, SMS, Data, and Fax in a small form factor and with low power consumption. With a tiny configuration of 24mm x 24mm x 3 mm, SIM900 can fit almost all the space requirements in your M2M application, especially for slim and compact demand
of design.
General Features:
- Quad-Band 850/ 900/ 1800/ 1900 MHz
- GPRS multi-slot class 10/8
- GPRS mobile station class B
- Compliant to GSM phase 2/2+
C Class 4 (2 W @850/ 900 MHz)
C Class 1 (1 W @ 1800/1900MHz)
- Dimensions: 24* 24 * 3 mm
- Weight: 7g
- Control via AT commands (GSM 07.07 ,07.05 and
SIMCOM enhanced AT Commands)
- SIM application toolkit
- Supply voltage range 3.4 ... 4.5 V
- Low power consumption
- Normal Operation temperature: -30 C to +80 C
Specifications for Fax
- Group 3, class 1
Specifications for Data
- GPRS class 10: max. 85.6 kbps (downlink)
- PBCCH support
- Coding schemes CS 1, 2, 3, 4
- CSD up to 14.4 kbps
- USSD
- Non transparent mode
- PPP-stack
Specifications for SMS via GSM/GPRS
- Point to point MO and MT
- SMS cell broadcast
- Text and PDU mode
Drivers
- MUX Driver
Specifications for Voice
- Tricodec
C Half rate (HR)
C Full rate (FR)
C Enhanced Full rate (EFR)
- Hands-free operation
Echo suppression
Interface
- Interface to external SIM 3V/ 1.8V
- analog audio interface
- RTC backup
- SPI interface
- Two Serial interfaces
- Antenna pad
- I2C
- GPIO
- PWM
- ADC
Interfaces/Ports
Number of Ports 48
Gigabit Ethernet Port Yes
Interfaces/Ports 48 x RJ-45 10/100/1000Base-T LAN
Interfaces/Ports 2 x Stack
Interfaces/Ports 1 x RJ-45 Console Management
I/O Expansions
Number of Expansion Slots 2
Expansion Slots (2 Total) X2 Uplink
Management & Protocols
Manageable Yes
Memory
Standard Memory 256 MB
Power Description
Input Voltage 110 V AC
Input Voltage 220 V AC
Input Voltage Range 100 V AC to 240 V AC
Physical Characteristics
Height 1.8"
Width 17.5"
Depth 18.1"
Weight (Approximate) 19.20 lb.
Features:
-Broadcast filtering, address auto learning and auto-update feature and th operating mechanism of store and forward.
-Cache size: 256KB, address table size: 4KB
-Ethernet 10Base-T or 100Base-TX or 1000Base-T to 1000Base-LX fiber optic media converters
-Support IEEE 802.3, IEEE 802.3U, IEEE 802.3X, IEEE 802.3z/AB, IEEE802.1d
-Supports full-duplex or half-duplex backpressure flow control flow control, and with Auto-Negotiation function
-Interface supports 1000Mbps, 100Mbps, 10Mbps, can use with notthe same rate.
-TX/RX dual-header Standard SC interface
-Electronical interface supports 10Mbps, 100Mbps, 1000Mbps
-Automatically adapt , optical interface work rate 1000Mbps port
-Integration of high-quality photovoltaic modules to provide good optical properties and electrical properties to ensure reliable data transmission
-Status LEDs on link/connection status, dynamic data transfer/ full duplex / half duplex/rate status.
-Provides one RJ-45 interface supports auto-electrical cross connect switches, hubs
-Power Consumption: 4.5 W (Power adapter input AC-85V~ 265V)
-Over 50,000 hours consistent working period.
Transmission fiber:
Multi-mode: 50/125, 62.5/125 or 100/140166;204;m
Single-mode: 8.3/125, 8.7/125, 9 / 125 or 10/125166;204;m
Operating temperature :0-50 161;227; C
Storage temperature: -40-70 161;227; C
Humidity: 5% -90% non condensing.
1x2 HDMI splitter,distributes 1 HDMI source to 2 HDMI displays simultaneously. It offers solutions for HDTV retail and show site, HDTV, STB, DVD and Projector factory, noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.
Features:
Input Video Signal 0.5 -1.0 volts p-p
Input DDC Signal 5 volts p-p (TTL)
Max SingleLink Range 1920X1200, 1080P
Output Video HDMI 1.3 + HDCP1.0/1.1/1.2
DVI 480p/576i/576p/720i/720p/1080i/1080p
Resolutions DTV/HDTV 480i/576i/480p/576p/720p/1080i/1080P
HDMI Version HDMI 1.3
Operating Frequency Up to 225MHz
EIDI Duration 4 seconds
Power supply DC 5V
Max. cable extension 10 meters by 28AWG HDMI cable; 15 meters by 26AWG HDMI cable.
Feature:
Support systems like DOS,Win3.x,Win95/98/98SE/2000/ME/XP,Win NT, Netware, Unix,Linux, Vista,etcú«
Support Hot plug,may add or reduce PC casually, no need power offú«
Switch Mode:ó+button switchú+ó+keyboard switch. with auto-feedback, software installation not required.
Max resolution: 1920í-1440ú«Frequency width:250MHZ
With auto scan function: every 8 secondsú¬
No external power required
Dimension: 112mm, 75mm, 27mm.
Housing: Plastic.
Neutral packing.color box.
2664 Networking Internet Peripherals Suppliers
Short on time? Let Networking Internet Peripherals sellers contact you.
