DESCRIPTION
Introductions:
1.firefighting equipment Approval:ABS,CCS,BV,DNVetc
2.fire fighting equipment material :stainless steel
3.Capacity of fire monitor/fire pump : 160m3/h,180m3/h ,360m3/h ,600m3/h , 900m3/h , 1200m3/h , 3600m3/h ,etc
4.firefighting equipment Type:Supply external Fire Fighting Systems , FiFi1/4,FiFi1/2, FiFi 1, FiFi 2 , etc
5.Fire Fighting System Engine:Cummins Engine or the demands you need
6.Fire fighting equipment Include:fire pump,fire monitor,with diesel Engine
7.Firefighting equipment color:red
Technical Parameters for Maritime Fire Fighting Fifi 3/ Firefighting 1 And 2 Firefighting Class System.
1.FiFi Class 2 System 7200m3/h
Diesel Engine Driven
Fire Pumps: 2X3600m3/h
Fire Monitors:4X1800m3/h@150m,
Remote Control System
2.FiFi Class 1 System 2400m3/h
Diesel Engine Drivenor Electric Motor Driven
Fire Pumps: 2X1200m3/h or one 2400m3/h
Fire Monitors:2X1200m3/h@120m
Remote Control System
3..FiFi 1/2 System
Diesel Engine Driven or Electric Motor Driven
Fire pumps: 1200m3/h
Fire Monitors:2X600m3/h@120m or1X1200m3/h@120m
Remote Control System
4.None Classed Fi-Fi System
Diesel Engine Drivenor Electric Motor Driven
Fire pumps:2X300m3/h@145m
Fire Monitors:2X300m3/h@85m
5. None Classed Fi-Fi System
6.Fire Pump Unit, fire pumpCapacity: 4200m3/h,3600 m3/h, 2400 m 3/h, 1800 m3/h, 1200 m3/h, 600 m3/h, 300 m3/h,250 m3/h ,ect
Certificate: CCS BV ABS DNV and other Class
7. Fire monitor
Including fire water monitor , foam monitor , powder monitor with Electric/hydraulic romote control and hand whell
REMARK:Designated the best solution for you,according to your requirements. Above just for your guidence.
If you need this products For ship,pls provide the below information for external Fire Fighting Systems
1. Capacity of the Fire monitor for this Fire Fighting Systems (m3/h)
2. Fire pump Capacity for Fire Fighting Systems(m3/h)
3.Need the diesel Engine for fire pump
4.Any special brand demands for diesel fire pump engine
Related pictures Maritime Fire Fighting Fifi 3/ Firefighting 1 And 2fir Firefighting Class System(fire monitor,fire pump,diesel engine for firefighting equipment)
Fire Extinguishing Ball is a fully automatic fire extinguisher. When throw into or rolling to fire, it will explode and make huge noise to catch everyone's attention nearby. You can also place it where the hot spots are such as flammable objects, circuit breaker box and gas tank. In case of fire, it will put out the fire by itself thus guarding lives and property.
Features:
* Reaction time: 3-5 seconds
* Auto spray/manual
* Everyone can be easy to use
* High security
* Environmental harmless dry powder and safe for users
* No need to do regular inspection every year, the life span is 5 years
Descriptions:
* Product name: AFO fire extinguisher ball
* AFO HS: 842410000
* Instruction: Fixed position by automatic fire sensor and/ or throw in fire area
* Content: Environmental harmless dry powder
* Automatic reaction time: 3-5 seconds
* Effective extinguish area: 3 m3
* Validity: 5 years
* Shape: ball type
* GW: 1.3~1.5kgs
If you would like to get more information of fire extinguisher ball, fire extinguisher, fire ball, AFO; please contact us by email. All business inquires are replied within 24 hours. Welcome to order by OEM and ODM!
Fangzhan SCBA Features and BenefitsFangzhan combined proven concepts to develop a better SCBA - an SCBA that, after every design change, was taken back to firefighters like you for testing and to make sure it was right. The result of hundreds of hours of design, engineering, and testing: an innovative way to think about the SCBA, placing the firefighter at the center of the design process. Specifications,TypeOpen-circuit pressure demand self-contained breathing apparatus,Facepiece MaterialButyl rubber,Head HarnessSilicone or Kevlar,AlarmsBell, plain whistle or warbling whistle,Second Stage RegulatorPilot valve,Heads-Up DisplayLED style,Cylinder Pressures2216 or 4500 psig,Cylinder Durations30-, 45- or 60-minutesRecommended Industries/Use,Fire Protection,Forestry,Government,Military,Mining,Municipal Services,Nuclear,Oil and GasHazards,Airborne Particulates,Biohazard,Chemical,Confined Space,Contamination,Extreme Environment,Explosion,Fire,Gas, Vapors, Smoke,Welding FlashRegulations,EN136 EN137 ,MSC339 (91)
1394 Fire Extinguishers Products Suppliers
Short on time? Let Fire Extinguishers Products sellers contact you.
I.SummarizeAs individual protective equipment for personnel respiratory, , gas defence mask (Type:FZFD) canprotect the respiratory organ ,eyes and facial skin. Masks can be directly connected with the canister, or connect with the canisters with the airway. FZFD type gas mask can choose different sizes canisters according to the different protection requirements. Its used  for military, factories and mines, scientific research, ambulance, fire and other units.It meets the standard of GB2890-95.II.BodyThe body with an inner periphery and chin off the cover is made of black rubber molded ,which ensureadhesion with the face and comfortable to wear. This rubber is specially formulated to enhance the life of the mask and the skin without irritation. Easy to adjust the belt, it can quickly wear. Therefore, the gas mask can ensure airtight, and comfortable to wear in all cases, even when engaged in intense activity.III.Specification1. Protection objects: according to needs of different canisters,it can protect people from toxic gases, vapors and toxic smoke.2. Expiratory resistance: not more than 90 Pa (30 l / min)3. View: no less than 70% of the total field of vision, double vision is no less than 30%4. View Performance: when longer than 1.5 hours, without fogging the lens, without distortion anddeformation (-30 )5. Tightness:( Mist leak tightness factor): not more than 0.005%
Descriptioneebd is a compressed air emergency escape breathing device designed to offer easy donning, , combined with optimal respiratory protection. It is contained in a bag for carrying which, when opened, automatically triggers the supply of breathable air from the cylinder. Overpressure maintained inside the hood eliminates any risk of inhaling toxic gases. The hood is adjusted automatically thanks to the integrated inflatable air cushion on the back of the head. This system allows the hood to fit securely over the head, offering greater respiratory comfort and leaving the hands free during donning, ensuring the highest level of safety. An alarm whistle indicates when the air supply is about to run out. Supplied with 3L steel cylinderThe unexpected release of noxious gases, vapors, fumes or other toxic airborne materials cannot be absolutely eliminated from every industrial setting. Nevertheless, every industrial setting can be easily equipped with ELSA Emergency Escape Breathing Devices. Placed in strategic locations, EEBD provides exceptional breathing protection for emergency escape from those areas where hazardous conditions may suddenly occur.EMERGENCY ESCAPE BREATHING DEVICES Very Simple to operate starts automatically upon opening of bag Easy to rechargeable and reusable 15 minute versions available ISO23269 & EN1146ParametersModel: TH/15-1Duration: 15 minutesTotal dimensions: 590*250*175 mmWeight : 7.0KGApproval: ECÂ Product TypeRespiratory ProtectionRangeSCBA (Self Contained Breathing Apparatus)LineCompressed airline filtration systemsBrandFangzhanIndustryChemical IndustriesPetro-chemical
Forced air respirator (FZQZ-I) is safety equipment for the wearer to use in different fields such as industry, , agriculture, medical team and scientific research, military, police and civil defense. It conveys the filtered air from the turbo fan to the wearer.Full load working time: built-in lithium battery charge full :�1.5hInstall an external connection power supply for more than 6hExhalation resistance: �98Pa (30L / min);Air outlet flow: � 170 liters / min;Mask leakage coefficient: � 0.005%;LCD monitor direct observation of electricity: Alarm when the power is less than 10% ± 2%, while the alarm red light flashes.Rechargeable lithium battery inside before leaving factory. Optional installation of external power is available , such as customer requirements according to customer requirements.
The respirator is mainly applied to the plateau, underground tunnels, fire, coal, chemical, tunnelsand high-rise buildings and other places.Emergency rescue and disaster relief, search probes andother respiratory protection when working with long poisonous gases, anoxic environment.Suitable environmental conditions:Product in the following environments should be able to reliably protect the respiratory organsâ?? Atmospheric pressure :70 ï½? 125 kPa Relative humidity :0 100 % RH Temperature : - 10 + 40 .Product Configuration This product is a positive-pressure breathing closed circulatory and respiratory protection devices.Full cover mainly composed of spherical full-field, breathing hose, clean tanks, air bags, coolers,oxygen cylinders, pressure gauges and other components.Residual pressure alarm usingmechanical alarm,which is safe and reliable.The respirator quantitative, automatic replenishment,manual oxygen supply three kinds of ways. This product complies with GA632-2006 "positivepressure oxygen breathing fire" and MT867-2000 "Isolated positive pressure oxygen breathingapparatus" standard.And it has received the National Fire Equipment Quality Supervision andInspection Center and the State Production Safety Inspection approved mining equipmentinspection and testing center.Structural features:a. soft breathing tube bold reform,add the cover This makes breathing gas capacity increases. Avoid frequent automatic replenishment and automatic exhaust breathing in large amounts Save gas supply, reduced breathing resistance, making breathing more stable performanceb. Using advanced exhaust structure, take advantage of oxygen inside the respirator,reduce the burden of carbon dioxide absorbent, save gas source, thereby extending the use of time. Using single-sided sheet material airbag, Increase the volume, decreases the balloon deformation resistance,positive pressure value can be set much lower, making breathing easierd. using the new country's first quantitative valve structure, bottle pressure change will not affectthe oxygen supply ration,more stable and reliable oxygen e. Domestic first large-capacity ice cooler, Lid down structure, Cooling effect Do not need to revealthe respirator to replace ice coverf. use the anti-fog maskanti-fog lens mask and hardening treatment, effectively improve the mask wearer sight problems affect, widening sealing lip mask for a wider population face, improve the mask sealing performance.
IMR EX660 SMART Sensor Gas Detector MAIN FUNCTION AND FEATURES
* SMART sensor module, easy for replacement and maintenance
* Intrinsically safe design
* Wide screen LCD
* High / Low alarm adjustable
* Calibrating level adjustable for each calibration
* Combustible gas channel with high-concentration protection function
* Low-voltage alert
* Internal memory storage of measurements (100,000 records)
* Data upload to PC
* Audible, visual and vibration alarm method
* Self-test power on
* Self-diagnostic and self-correction function
IMR EX660 SMART Sensor Gas Detector TECH SPECIFICATIONS
* Target gas: combustible gas, toxic gas, Oxygen, VOC
* Detecting method: Natural diffusion
* Response Time:
Semi-conductor, Catalytic, Thermal Conductivity t 90 < 30s
Oxygen, Carbon Monoxide, Hydrogen Sulfide t 90 < 30s
Other Sensors t 90 < 120s
* Working Conditions:
Combustible Gas: -40'C ~ 70'C
Toxic Gas: -20'C ~ 50'C
Working humidity â?¤ 95%RH non-condensating
* Power Source: Lithium battery (DC3.7V 6600mAh)
* Charging time: 4 ~ 6hours
* Continuous working time:
30 hours (for combustible gas and toxic gas)
300 hours (for toxic gas under temperature of 20'C)
* USB connectivity for data transfer
* Explosion-proof grade: Exia II CT4
* Ingress protection: IP65
* Dimensions: 168mm x 91mm x 45mm
* Weight: about 500g
1) this product meets standard requirement of ga88-1994
2) work in the high temperature, with high heat insulation(1000 celsius degree)
3) multilayer structures, the surface layer is with aluminium, multilayers inside adopt heat insulation and burning resistant material, also with a layer of perspiration
4) the gloves and the boots also adopt the material of heat insulation, comfortable to wear
5) the helmet also adopts the same material, plating carbon fiber glasses, which has wide and clear visual field
6) a bag for per suit
7) weight: 5.8-6kg
Fire suit application:
Protecting fireman from the fire, when they approach, when they approach the fire, high temperature, heat oven or burnt things. Suit are used for rescue operations in an area of intense heat, fire, steam, hot liquid by fire fighters in industries like petrochemical plants, foundries, plant, steel, glass, ceramics and etc.
Fire Blanket
Using Instruction:
1. Place the product on the wall at a easily noticed and reached location or inside a drawer.
2. When fire accident occurs, quickly take out the product with both hands pulling the 2 black tapes.
3. Open up the product and hold it in your hand as if you are holding a shield.
4. Use the product to cover up the fire lightly and at the same time, cut off electricity or gas.
5. While the product is covering up the fire, use other measures to distinguish the fire until it is completely off.
6. After the fire has been completely distinguished, take off the product when it has been cooled down and treat it as an inflammable trash.
7. In case the clothes of a person are on fire, please wrap the person with the product to distinguish the fire and call #120 immediately.
Important Notes:
1. Firmly fix the product in an easily noticed and easily reached location (e. G. Back of the entrance door, inside the cabinet of your bed head, inside the cabinet of your kitchen, trunk of your car etc. ).
2. Inspect the product every 12 months.
3. In case any damages or dirt observed on the product, please replace it immediately.
We sale and export fire extinguishers, fire hose and fire safety devices from China.
Smoke detector ms-as-02-4
Smoke detector
Product information
The product is a new type of photoelectric smoke detector, when it detects smoke, it will output signal immediately and trigger connected unit to work, which tell you in advance that fire will occurs and avoid unwanted loss, and take you safety and convenience.
Specifications
Power supply:dc12v~dc33v
Work temperature:-10~+40
Static current:17-20a(24v) 17-23a(33v)
Working humidity:
Kitchen fire system
Fire system
Automatic kitchen fire suppression system, are essential to modern service industries and commercial kitchencooking stove fire extinguishing system.
Kitchen automatic fire extinguishing equipment and a kitchen fire special agents have all passed the national fixed fire extinguishing systems and fire resistant components for quality supervision and inspection center qualified.A kitchen fire special agents are nontoxic, pollution-free, corrosion free cleaning of fire special agents. Fire extinguishing efficiency and ceased to burn.
Kitchen automatic fire extinguishing device can be widely used in hotels, guesthouses, offices, hospitals, schools, factories and enterprises and institutions in the kitchen, dining room (cooking wok, deep fry pan) and western-style cookers (flower stoves, barbecue stoves, lie furnace).
Working principle
1)after the oil pan on the kitchen hearth is burning, the large heat from the fire makes the heat-detection infusible metal in haul cable releaser break away.
2)the heat detection system open the release device of kitchen fire-extinguishing system to exert pressure on the vessel storing the fire extinguishing agent
3 )the liquid extinguishing agent is sprayed on the surface of the device n the kitc and drive all the auxiliary pneumatic or electric switch-off devices and the alarming linkage system. Hen hearth and the smoke exhaustion hood, oil-filter screen and exhaustion pipeline through the nozzle. This special extinguishing agent can extinguish the flare inside the oil pan rapidly and form a covering layer to inhibit the burning of oil material steam and prevent the rekindling of oil material.
4)within about 3-5seconds after the system sprays the agent, the valve in the system opens the spraying valve automatically, the water sprays through the pipeline of extinguishing agent and the nozzle and cools and brushes the oil material and the surface of the hearth device rapidly.
Zstw series water mist fire sprinkler
Sprinkler head
Product details
Water mist system fire sprinklers is the type of open sprinkler, the pressure of water in its internal, through the collision, rotation, mixing, after a fire spray of small water droplets, with action of better cooling, suffocation and electric insulation. Widely used in flammable, combustible gas, liquid processing, and saving industries place etc.
About the details as follows:
1.Material: brass and chrome plating
2.Thread: 1/2
3.Installation: pendent
4.The min.Pressure: 0.35mpa
5.K=5.6(metric k=80)
Zstm series water curtain fire sprinkler
Zstm series water curtain fire sprinkler (drencher head) is a main element of the drencher system.It distributes water to a form of curtain shape with a certain width and thickness to isolate fire flame and smoke and absorb heat. It is widely used in large scale workhouse, hall, cinema, dancing stage, and doors or windows of buildings etc.
About the details as follows:
1.Material: brass and chrome plating
2.Thread: 1/2 and 3/4
3.Installation: pendantïhorizontal
4.The min.Pressure: 0.14mpa
Model specificationconnect threaddiameter nominalinstallationmin.Pressure(mpa)
Zstm-15 single gapzg1/2"15horizontal0.14
Zstm-20 single gapzg3/4"20horizontal0.14
Zstm-15double gapzg1/2"15horizontal0.14
Zstm-20double gapzg3/4"20horizontal0.14
Zstm-15pendentzg1/2"15pendent0.14
Zstm-20pendentzg3/4"20pendent0.14
Product details
1.Material: brass and chrome plating
2.Temperature: 68with 5mm glass bulb
3.Thread: 1/2"
4.K= 80
5.Rated working pressure: 12 bars(1.2mpa)
6.Airproof test pressure: 24bars(2.4mpa)
7.Strength test pressure: 30bars(3mpa)
8. Weight: 140g more or less
Fire hose
Water system
Technical parameter
1)the lining of fire hose is pvc, rubber or copy rubber . And the jacket of fire fighting hose is woven by high intensity of polyester filament or polyester short-fiber( twill/plain ).
2)there are special adhesive ( solid or liquid)between the jacket and the hose. The canvas hose is soft and highly polished, reduce the flow resistance
3) the fire hose is thinner and softer, lighter and more convenient to use.
4) the fire hose is high pressure resistance, low temperature resistance, anti-corrosion, aging resistance, wear-resisting.
5) we supply different color lining of fire hose : blue, black, transparent, etc or according to your requirement
Fire extinguisher cabinet msf02-004
Fire extinguisher cabinet
Fire cabinet
Model: msf02-004
Sizel*b*h) mm: 430mm*220mm*750mm
(extinguisher size:9kg*2)
Materials: cold-rolled steel
Thickness:0.8mm
Coating: ral3000
Smooth powder coating
We produce and export fire extinguisher cabinet and hose reel cabinet from china.
