1. Application
Level of Lubricant and hydraulic oil for machineries
Water tanks and level measurement and controls in industries area
Tank level of shipment
Swage treatment
Irrigation and hydraulic monitoring
HAVC
2. Features
High sensitivity, good long term stability
Strong reliability
Water-proof, dust-proof
Varies construction and installation methods
EMI/RFI
Special condensation design
High strength stainless steel construction.
Light sensitive switch is a device that is used for automatically switching on and off the street lights garden lighting, passage lighting and doorway lighting etc in accordance with the natural lighting level.
The lights connected to the light sensitive switch are turned on automatically in evening when the natural light falls below 15 lux. And lights are switched off in the morning automatically when the light level reaches above 20 lux.
Eliminates the need of human operation for switching on and off any external light connected with this system.
Saves energy saves electricity , no need to manually switching on and off the light, easy to install and durable.
Applications: roadway lighting , building perimeter lighting , outdoor advertising signs , parking lot lighting, garden lighting passage lighting and doorway lighting etc.
MCC-F load cell uses the beam structure ,the high accuracy, low contour, sealed , stable performance; has strongly anti-torsion, anti-side ability, is suitable in electronic weighing apparatus and so on for automobile scale, track scale, platform scale, bunker scale, crane, and compression testing machine.
Specification:
Range: 0.3,0.5,1,2,3,5,10,20,3050,100 t
Supply voltage :10V or 12V,15V,24V (DC)
Output signal :1.5mV/V or 0~5V,1~5V,0~10V, 0~10mA,0~20mV, 4~20mA
Non-linearity: 0.03-0.1 % F¡¤S
Hysteresis :0.03-0.1 % F¡¤S
Non-repeatability :0.03-0.1 % F¡¤S
Temperature drift: 0.003 F¡¤S/¡æ
Zero output: ¡Ü2 % F¡¤S
Operating temperature :-20~80 ¡æ
Overload :150% F¡¤S.
Model: SFT-620
Number of diodes: 17
Maximum beams(distance>400m): 96 beams
Size: 9mm(thickness)*24.5mm(width)*2000mm(height).
One cylinder tube includes: 1 pc power supply control unit /2 pcs cables /1 pc transmitter / 1 pc receiver /1 pc use manual / 1 set mounting accessories.
Each set packed in a cylinder tube and 100 sets to a wooden case.
ARN-TS2D is a MEMS based single/dual axis inclinometer module that boasts a low price tag. It is most appropriate for mechanical industry, transportation, heavy vehicle, construction and survey applications. This device returns highly accurate angular data in static conditions and can be a part of lab instrumentation, platform stabilization equipment and oem alignment measuring instruments. Single axis module returns roll and dual axis returns roll and pitch information.
1. Measurement range: 60deg (Pitch), 180deg (Roll)
2. Accuracy in static conditions: 0.1 degrees
3. Size: < 78 mm x 56 mm x 36 mm
4. Weight: < 200 grams.
5. Output rate: 1 to 50 hz configurable
6. Power supply: - +8 to +12 vdc
7. Interface: RS232, RS485 serial digital.
Cylindrical inductive proximity sensor:
1, diameter form m4 to m30. Max and min lengths available.
2, cable and connector type optional, rectangle inductive proximity sensor:
1, from size 7*7mm to 210*210mm
2, steady performance due to professional ic design
3, short-circuit, reverse polarity protection
4, widely application such as limit and counter function
Humidity measuring range: 1%rh~ 99 %rh
Supply voltage vs: 10 v
Time constant (33 to 80 % rh, still air @ 63%) ta: 3.5 s
Deviation to typical response curve (10% to 90%) rh) :+/-2 %rh
A) voltage supply: 5 vdc
B) humidity measuring range: 0~100 %rh
C) response time (at 63% of signal) 33%rh to 75%rh(3): 5 s
D) suitable for small bulk assembly
E) reliability not affected by repeated condensations
F) full interchangeability. Better than +/-3%rh and +/-0.15oc
G) demonstrated reliability and long term stability
H) typical 1 to 3.6 volt dc output for 0 to 100% rh at 5 v dc supply
I) humidity calibrated within +/- 3% rh @ 55% rh
J) temperature measurement through ntc 10 kª+ +/- 1% direct output
K) ratiometric to voltage supply within the specified range
