Air Casters are also often called Air Cushions, Air Skates or even Air Bearings. They can be mounted permanently underneath specific equipment or tools or used as a modular air caster system.
Air casters are pneumatic elements that can be placed underneath an object or frame, allowing almost friction-free movement and positioning in all horizontal directions.
Air casters is low profile, the air bag with air module height is just 50mm, more safety when
moving, and air casters will protect the floors from damage, expensive reinforcement is not necessary.
Air casters with air modules can be used on normally cement floor, polyurethane floor and other floors.
Air casters products increase productivity,saving you time and money.
The air driven-liquid booster system is controlled by PLC and outputs a liquid pressure of 0-64MPa according to requirements. Equipped with OGD80 gas drive liquid pump, low pressure pressure gauge, high pressure holding pressure switch, unloading switch, push-button start switch, PLC touch screen control system, can set the upper and lower pressure, and the holding time, if the holding pressure is lower than The lower limit pressure indicates failure, and the buzzer alarms. If it does not fall below the lower limit pressure, it indicates that the test is qualified.
Equipment functions
1. Pressurize the pressurized medium water or oil, and the supercharged pressure is controlled within the allowable division;
2.1 ~ 64MPa liquid test: compressed air controls the driving pressure through the pressure reducing valve, and the compressed air drives the supercharger to perform pressure conversion to output high-pressure liquid;
3. The test pressure can be set within the range of the test. When the test is achieved, the test can be automatically stopped and the alarm beep completed.
4. During the test, if there is a leak or the pressure is too high, it can automatically stop and alarm;The test bench is equipped with an emergency button. In case of an accident, you can press the power to immediately unload and stop the test.
II.Equipment performance parameters
III.Test bench structure
IV.Layout of Machine for reference.
V.Technical Parameter of MLS-OGD80WAir driven liquid booster pump
We can produce various pneumo-hydraulic pressurization systems according to customers requirements. These systems can be used for pressure tensioning, hydraulic drive and control, hydraulic test, etc. The maximum pressure can be up to 6400bar. ODMT Pneumo-hydraulic Pressurization System has compact structure and is easy to operate. What the users need to do is only to lead the drive air to the liquid port, then adjust the pressure regulating valve of the drive circuit to reach the needed working pressure. Typical liquid pressurization operation:
Typical applications:
Static and burst test for valves, pipe fittings, etc.
Test for automobile brake system and nozzles.
Chemical reagent injection into pipelines or reaction kettles.
Putting coolant into jars.
Providing force for clamping, forming, drilling, shearing and stamping machines.
Providing buffer and lift force to protect molds when large presses overload.
Static and dynamic test for aviation accessories.
Performance test and calibration for instruments.
High pressure cleaning and water injection of waterjet cutting equipment.
Injecting oil into lubrication system of mechanical equipment.
Providing clamping force for valve test.
Providing press force for shaft sleeve and cylinder liner.
NorthStar Portable Electric Air Compressor - 3/4 HP, 1-Gallon Hot Dog, 1.3 CFM
The NorthStar 12 Volt Electric Air Compressor is ideal for applications where onboard air is needed. Compact, portable design has handle for easy carrying. Direct-drive pump design provides lower noise and improved cooling. Portable compressor delivers 100% continuous duty cycle for heavy-duty service.
What's Included
(1) 12V, 3/4 HP, 1-gallon electric air compressor
Features + Benefits
12V, 3/4 HP, 2,800 RPM electric motor
Cast iron, oil-free direct-drive pump
Delivers 1.3 CFM @ 90 PSI
100% continuous duty cycle
Oversized motor cooling fan prevents overheating
Direct-drive pump design for lower noise and improved cooling
Unit is very stable when sitting on the ground
Compact, portable design for easy carrying
Canister inlet filter has replaceable filter elements
Includes 6.5ft. work cable and clamp
Key Specs
Item# 51481
Brand NorthStar
Ship Weight 35.3 lbs
Max. PSI 135
Air Tank Size (gal.) 1
CFM at 90 PSI 1.3
CFM at 40 PSI 2
CFM at Max. PSI 0.85
Air Outlet Size (in.) 1/4 NPT
Air Outlets (qty.) 1
Quick-Connect Outlets Yes
Duty Cycle 100% (w/in 1 hr.)
Working Pressure (PSI) 135
Tank Fill Time (min.) 1.9
Regulator Included Yes
Tank Type Hot dog
Drive Direct
Oil Required No
HP 3/4
Amps 40
Volts 12
Motor RPM 2,800
Drain System 1/4-in. O-ring
Pump Life (hrs.) 2,000 (50% duty cycle)
Pump Material Cast iron
Noise Level (dB) 77
Dimensions L x W x H (in.) 14 1/5 x 13 x 12 1/5
Weight (lbs.) 33
Visit our website OFFICIAL STORE ACETOOLS-SUPPLIES for catalog, transaction, full Description, Term and Conditions, best product, or special price.
Whether you need to bring electricity to a jobsite or severe weather has taken out your house power, this Campbell Hausfeld 2-in-1 air compressor/generator with a Honda engine provides compressed air and electric power to meet your needs. Ideal for commercial and industrial applications on the jobsite and mobile services, this unit is powered by a reliable Honda GX390 gas engine. Two-stage cast iron air compressor delivers high output and reliability, with twin 5-gallon air tanks and a heavy-duty steel belt guard for safety. 5,000 Watt generator has a UL/OSHA compliant control panel and 3 outlets with GFCI protection. 49.8in.L x 26in.W x 34.5in.H.
What's Included
(1) 2-in-1 Air Compressor/Generator with Honda Engine, Model# GR2100
Features + Benefits
Commercial and industrial jobsite power
Alternative power during severe weather
Honda GX390 OHV gas engine with electric start
Compressor output: 14.3 CFM @ 90 PSI; 13.7 CFM @ 175 PSI
Generator with 5,000 continuous/6,000 surge Watts
Two 120V, 20 Amp outlets and one 120V/240V, 30 Amp twistlock outlet
Key Specs
Item# 44911
Brand Campbell Hausfeld
Manufacturer's Warranty 1 year Limited Warranty
Ship Weight 486.0 lbs
Max. PSI 175
HP 13
CFM at 175 PSI 13.7
CFM at 90 PSI 14.3
Engine Honda GX390
Start Type Electric
Stage 2
Tank Type Horizontal twin
Air Tank Size (gal.) 10
Portable or Stationary Stationary
Pump Cast iron
Duty Cycle 100% at 50A/65% at 180A
Dimensions L x W x H (in.) 49 2/5 x 26 x 34 1/2
Visit our website OFFICIAL STORE ACETOOLS-SUPPLIES for catalog, transaction, full Description, Term and Conditions, best product, or special price.
- Our spare parts are directly from IR factory in USA.
Rotor, Impeller, all the stages Bearing, Carbon Seals, MP3 board, Vibration Probe & Coolers
Also, we are the Authorized Distributor for REGO, Alfa Laval, Mouvex, Wilden, Blackmer, Hansen, Newsonic Hardness tester, INS , Hoses, V Spengi & OMAL valves etc.
We are also specializing on supplying pumping solution, valves, pipes, fittings and other wide range of engineering products.
AirHorse was one of the first grade screw compressor manufactures to implement the V-belt drive. AirHorse screw compressors with V-Belt drive are economical and reliable. The belt driven screw air compressor use Germany technique which provide high quality air, low noise and high efficiency. The belt driven screw air compressor is more elegant, easy to install, simple operation and maintain.
Product Features:
Oilless
Silent, stable
Supply clean air
long use life
Tanks have been painted inside, rust-proof
Safe and easy operation
Air pressure can be adjusted
Easy and costless maintainence
Possible application:
Food and beverage, science, technology, anlysis, instruments, laboratories, environment supervise, CNC, CNC painting, cloth, beauty, petrochemical engineering, auto, etc.
Motors:
OF190/ OF280 Lightweight, low pressure, protable
OF500/ OF700 / OF850 Standard pressure
OF1100 / OF1500G / OF2500 High pressure and Big airflow
Product Advantages:
Various models for different demands
Ultra dry with dryer
Ultra silent with soundproof cabinet
DA7001 Specifications:
Voltage/Hz: 100V~240V 50Hz/60Hz
Power: 0.75kW/1HP
Max airflow: 152L/min(5.37CFM)
Airflow@7Bar: 50L/min(1.77CFM)
Tank: 30L(6.6Gal)
Net weight: 28kg/pc
Gross weight: 33kg/pc
Noise: â?¤68dB(A)
Unit dimension: 410*410*650mm
Package Dimension: 450*450*730mm
Atlas Copco Air Compressor
Air Compressor
Airman Air Compressor
A world-leading provider of industrial productivity solutions.
Site Condition
Suitable for various drilling operations, including rotary percussive drilling, DTH drilling, coring, auger drilling and more.
Product Features
Founded in 1873, Atlas Copco is a multinational industrial corporate group headquartered in Stockholm, Sweden. It's a world-leading provider of industrial productivity solutions. It develops and manufactures industrial tools, air compressors, construction and mining equipments, assembly system and provides relevant services.
Airman Air Compressor
Air Compressor
Airman is one of the largest air compressor manufacturers in the world.
Site Condition
Suitable for various drilling operations, including rotary percussive drilling, DTH drilling, coring, auger drilling and more.
Product Features
Airman is one of the largest air compressor manufacturers in the world. With dozens of manufacture plants spreading in Asia, North and South Americas, Australia and Europe, Airmans production line includes centrifugal compressor, rotary screw compressor, scroll compressor and piston compressor, which are widely used in industrial plants, military and construction.
Model Rated Operating Pressure kg/cm² Free Air Delivery m³/min Engine model/Power kw
PDS390S 7.1 11 Isuzu DD-4BG1T/80.9
PDSG460S 13 12.5 Hino J08C-V/118
PDSH600S 17.3 17 Isuzu 6HK1/183.9
PDSH850S 17.5 24 Mitsubishi 6D24-TC/228
PDSJ750S 21.1 21.2 Mitsubishi 6D24-TC/228
PDSH850S/J750S 17.5/21.1 24.0/21.2 Mitsubishi 6D24-TLE2A/238/235
PDSK900S 24.6 25.5 Mitsubishi S6B3-PTA/327.3
PDSK1200S 24.9 34 Caterpillar C15/403
