PRODUCT DATA SHEET ACID RESISTANT BRICK
Material : FIRECLAY Type Acid Resistant Brick
Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK)
Specification : ASTM C279, ASTM C410, IS 4860-1982
DESCRIPTION :
* We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required.
FEATURES OF ACID RESISTANT BRICK:
* Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature
AREA OF APPLICATION:
Chemical Analysis (Average)
Acid and Alkali Storage Tank Farms
Demineralization plants and Water treatment plants
Chimney inside lining, FGD linings
Towers and Columns
Process Vessels and Tanks
Sewerage Treatment Plants and Lines
Industrial Flooring and Bund Areas
Chimney and Flue Gas Linings
Hoppers and Chutes
SiO266.4
Al2 0324
TiO21.1
Fe2 O31.1
K2 O + Na2 O2.5
NOT RECOMMENDED:
HF acid or other fluoride solutions - Heavy thermal shock
Characteristic
Fireclay Type Acid Resistant Brick - Test Standard
Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20
Water Absorption, % - 0.1 to 1.8 ASTM C-20
Apparent Porosity, % - 4.05 to 4.14 ASTM C-20
Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279
Modulus of Rupture, Mpa - 14.6 ASTM C-67
Compressive Strength, PSI - 15500 to 17250 ASTM C-67
Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102
Surface Hardness, MOHS Scale - 7
Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236
Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103
PRODUCT DATA SHEET ACID RESISTANT BRICK
Material : RED SHALE Type Acid Resistant Brick
Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK)
Specification : ASTM C279, ASTM C410, IS 4860-1982
DESCRIPTION :
We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required.
FEATURES OF ACID RESISTANT BRICK:
Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature
AREA OF APPLICATION:
Chemical Analysis (Average)
Acid and Alkali Storage Tank Farms
Demineralization plants and Water treatment plants
Chimney inside lining, FGD linings
Towers and Columns
Process Vessels and Tanks
Sewerage Treatment Plants and Lines
Industrial Flooring and Bund Areas
Chimney and Flue Gas Linings
Hoppers and Chutes
SiO266.4
Al2 0324
TiO21.1
Fe2 O31.1
K2 O + Na2 O2.5
NOT RECOMMENDED:
HF acid or other fluoride solutions
Heavy thermal shock
Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick
Characteristic
RED SHALE ACID RESISTANT BRICK
Test Standard
Bulk Density, gm/cc - 2.3 to 2.35
ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968
Apparent Porosity, % -0.5 to 1.75 S 4860
Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279
Modulus of Rupture, PSI -2133 to 3555 ASTM C-67
Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968
Abrasion Resistant , Volume in mm3 -69 to 85 EN 102
Surface Hardness, MOHS Scale - 7
Magnesia Bricks Description
Magnesia Bricks are alkaline refractory materials. These products have over 90% magnesium oxide content and adopt periclase as the principal crystalline phase. Magnesia Bricks can be divided into two categories of Burnt Magnesia Bricks and Chemical Bonded Magnesite Brick. They have excellent performance of superior high temperature mechanical strength and volume stability. Magnesia Bricks can service in the high temperature of 1750.. They are ideal products for glass furnace application.
Magnesia Bricks Features:
It is a kind of alkaline refractory product with periclase as main phase magnesite-alumina spinel clinker as basic material. the product has such characteristics as good temperature vibration, good strength and volume stability in high temperature.
Magnesia Bricks Application
Basic open-hearth furnace for steelmaking
Electric furnace bottom and wall
Permanent lining of oxygen converter
Non-ferrous metal metallurgy furnace
Hyperthermia tunnel kiln
Lining of rotary cement kiln
Heating furnace bottom and wall
Regenerative chamber of glass furnace
Magnesia Bricks Properties
High Refractoriness
Good alkaline slag erosion resistance
High apparent initial softening temperature
Good thermal conductivity
High thermal expansion
Magnesia Bricks Manufacturing Process
Burnt Magnesia Bricks are manufactured with magnesite clinker as the raw material and fired in the high temperature of 1550~1600 after smashing, burdening, mulling and molding. High-purity products can be fired in the temperature that over 1750. Chemical bonded magnesite brick is produced with certain chemical bonding through mixing, molding and drying.
ALUMINA MORTAR (Test Certificate)
General Properties
A. Max service temperature - 1500 oC
B. Maximum grain size - 0 - 1.5 mm
C. Water required for mixing - 22 - 30%
D. Setting - Airsetting
E. Sintering Temp - 1550 oC
Chemical Properties
A. Al2O3 - 50.00%
B. SiO2 - 31.00%
c. Fe2O3 - 5.00%
D. LOI - 7.00%
Physical Properties
A. Dry Density - kg / m3
B. CCS - 17 kg / cm2 after drying at 110C / 24 hr
C. MOR - 20 kg / cm2 at 110 oC/ 24 hr
18 kg/cm2 at 800 C/ 3 hr
Thermal Properties -
A. Refractoriness ( Orton / C) - 31.5 orton cone/1699 oC
Packaging - 25 - 50 kg bags
Storage Life - 12 months
Delivery State - Dry
We provide the topmost first-class Fly Ash Bricks made with the aid of stone dust, lime, cement to make them powerful enough. Our Fly Ash Bricks are gentle in weight which makes them exceptional from other merchandise. Due to their excessive force there is no breakage in them for the period of transport and use. They�¢??ve a low water penetration which reduces the seepage of water via the bricks. We�¢??re completely devoted in offering excessive nice Fly Ash Bricks. We now have developed a state of artwork infrastructure to reward the enterprise compliant variety of fly ash bricks providing advanced. The superb insulation of Fly Ash Brick supplies a comprehensive constructing material solution for indoor and outside construction. They�¢??re quick to put in and can form up any constructing assignment actual fast. They may be able to be cut, routed or sanded to fit in the various standards of a construction website online. They're apt for urban construction that has a sharp temperature upward thrust gradient. We experiment the blocks to make certain highest force.
High alumina description generally means content of alumina percentage is higher than 45. Alumina is one of the most chemically stable oxides, and it offers excellent hardness, strength and spalling resistance. Alumina refractories are suitable for lining furnace operating up to 1850C. Alumina refractories have the advantages of a high resistance in oxidizing and reducing atmosphere and is extensively used in heat processing industries.
High alumina description generally means content of alumina percentage is higher than 45. Alumina is one of the most chemically stable oxides, and it offers excellent hardness, strength and spalling resistance. Alumina refractories are suitable for lining furnace operating up to 1850C. Alumina refractories have the advantages of a high resistance in oxidizing and reducing atmosphere and is extensively used in heat processing industries.
