Find Verified Anthracite Coal Suppliers, Manufacturers and Wholesalers

Premium-grade anthracite Coal with high carbon content and low volatile matter, ideal for industrial furnaces and metallurgy.

For the calcined anthracite, fob 320-420usd tianjing port, quotation is valid utill this month, perment term is t/t. But the cost might be different at different purchasing date, so we need to check and update the offer for u again that day when u confirm order date exactly later, please be noted.

The calcined anthracite coal is through high temperature treatment and screening, uniform particles, is one of the ideal materials for carburizer and electrode paste.

In China, anthracite is usually calcined in electric calciners, rotary kilns and pot furnaces, and the anthracite produced in electric calciners is called as electrically calcined coal (ECA for short) while the anthracite produced in other two calciners is called as gas calcined coal (GCA for short).

Electrically calcined anthracite coal, Electrical forging material is made from high-quality anthracite and during calcining, the temperature up to 2000 By calining the high-qualityanthracite, the Coal lattice is hanged Then the anthracite becomes half graphitization. Then the material can meet many demands by changing its physical and chemistry character The specification.

Due to it is low in volatile matters, good in thermal and electrical conductivity with the powder resistivity about 600 and mainly used in carbon bricks, electrode pastes and cathode carbon blocks with certain requirements for electrical conductivity. Moreover, the proportion and particle size of ECA in such products vary depending on the situation of different enterprises.

The calcination temperature of GCA is about 1200 and its electrical conductivity is far inferior to that of ECA, but the sulfur content of anthracite is usually 0.3-0.5%. GCA is widely used in steel and foundry industry as coal recarburizer by virtue of its higher cost performance.
We have established a long-term cooperative relationship with anthracite plants in Vietnam. We also provide calcined anthracite coal and dried anthracite coal from Vietnam:

Calcined Anthracite Coal
FC 95% ASH 4% S 0.5%
FC 92% ASH 6.5% S 0.5%

Dried Anthracite Coal
FC 85% Ash 11% VM 4% S 1% MO: 5%
FC87% Ash7 VM 7% S 0.65 MO:5%

Carbon raiser used real Anthracite Coal as material.
different material with different price in the market.

In fact, the unit cost of carburizer in bituminous(soft) coal production is much higher than that in anthracite production. For example, for steel plants, 300 tons of anthracite carburizer is needed for 200000 tons of steel, but 500 tons of bituminous coal carburizer is needed.

Any interesting,please contact us freely.
wechat/WhatsAPP numbervis 008613739698406
E-mail ID is sophiawang110609@163.com

Product Description

Using calcined anthracite coal carburizing agent and cast iron using carburizing agent steel, and other materials are also useful for adding to the carburant carburant is applied, steelmaking, iron carbon materials. High quality carburizing agent is essential to producing high quality steel auxiliary additives.



Usage:

For 1-5 T furnace:
- while a small amount molten iron in the furnace,
- or with some molten iron remained, add the carbon additive one-time,
- then add the other material.
which can make carbon additive fully absorbed.


For greater than 5 T furnace:
- mix proper carbon additive with charging material as suggested first,
- and then along with the increase of charging material gradually,
- that is, before the molten metal rising up to about 2/3 height of furnace,
- all carbon additive shall be added.
It guarantees sufficient melting & absorbing time before molten metal out, and improves the absorption of carbon.

1), High purity
- Control the consistency of raw material from the mine resource.
- Introduce automatic whole-process equipment to ensure product consistency.
2), Good performance
- Increase globular graphite amount in the nodular cast iron significantly to promote the graphitization;
- Increase the graphite crystal nucleus of molten iron, refine graphite in the matrix for more uniform distribution;
3), Fine classification
- Various product category, to provide customized carbon raising scheme
4), Cost-saving
- Reduce the usage amount of iron, increase scrap consumption, and save raw material cost.

For 0-5 T furnace use:
While a small amount molten iron in the furnace
Or with some molten iron remained. add the carbon additive one-time
Then add the other material
Which can make carbon additive fully absorbed.

For greater than 5 T furnace
Mix proper carbon additive with charging material as suggested first,
And then along with the increase of furnace charge down into the furnace inside gradually.
That is, before the molten metal rising up to about 2/3 height of furnace
All carbon additive shall be added
It guarantees sufficient melting absorbing time before molten metal out, and improves the absorption of carbon.

Calcined anthracite coal
F.C 90%
1-4MM
50KGS Packing

Basic Info.
Model NO.: Anthracite
Application: Steel Industry
Color: Black
Grade: Low Sulfur Grade
Particle Size: Medium Particle Size
Sulfur Content: Low Sulfur Content
Specification: 1-3, 3-8, 1-5, 3-15mm
Origin: China
HS Code: 3824993000

Product Description
Carburizer is a kind of material used to increase the carbon content in liquid iron,steel. is mainly used in the production process of casting, cast iron, cast steel and so on. The main function of carburizer is to adjust the carbon content of molten iron or molten steel by increasing the amount of scrap, to reduce the amount of pig iron, and adding specific carburizer in the smelting process, to ensure that the product meets the specific carbon content requirements.

Calcined Anthracite

FC: 88-95%
ASH: 0.3-0.5%
VM: 1-2%
S: 0.3-0.5%
SIZE: at option.

Product Description
Calcined anthracite is a high-quality carbon material processed by calcining high-purity anthracite at high temperatures (1200-1500�ºC). It features high fixed carbon content, low volatile matter, low ash, low sulfur, excellent thermal stability, and good electrical conductivity. As an environmentally friendly and cost-effective carbon additive, it is widely used in metallurgy, refractory, and chemical industries.

Specs
special.
F.C.:95%MIN
Ash:4.0%MAX
Moisture:1.0%MAX
V.M.:1.0%MAX
S:0.3%MAX
N:0.3%MAX
Class1.
F.C.:92%MIN
Ash:6.5%MAX
Moisture:1.0%MAX
V.M.:1.5%MAX
S:0.3%MAX
N:0.5%MAX
Class2.
F.C.:90%MIN
Ash:8.0%MAX
Moisture:1.0%MAX
V.M.:2.0%MAX
S:0.5%MAX
N:0.5%MAX

Size: At buyer's option.

Packing: At buyer's option.

Production Capacity:3000mt/Month.

Application Fields
Our calcined anthracite is a premium carbon material produced by high-temperature calcination, with core advantages of high fixed carbon, low volatile matter, low sulfur, and excellent thermal stability. It is widely applied in various industrial fields:

Steelmaking & Cast Iron: High-efficiency carbon additive to improve molten metal carbon content, optimize casting quality, and reduce defects.
Aluminum Smelting: Binder raw material for prebaked anodes and auxiliary carbon additive, enhancing electrolysis efficiency.
Refractory Materials: Raw material for carbon-containing refractories (e.g., magnesia-carbon bricks), improving high-temperature resistance and corrosion resistance.
Foundry Industry: Stable carburizer for gray iron and ductile iron production, ensuring mechanical properties of castings.
Chemical Industry: Processed into graphite powder, carbon blocks, etc., for conductive coatings and electrode materials.
Metallurgical Flux: Optimizes slag fluidity, promotes impurity precipitation, and increases metal recovery rate.
Graphite Product Manufacturing: Aggregate and filler for producing graphite electrodes and blocks, reducing raw material costs.
Water Treatment: Adsorbent for heavy metals and organic pollutants in industrial wastewater.