Product Features
Insulating Stick for rescuing work in various live workplaces. It is used to grasp the injured person by the waist and bring them back to a protected area. It can also be used to push a cable away from
a victim. Indoor and outdoor use.
Product Character ï¼?
1. Fiberglass Stick: meets ASTM F711, IEC 60855-1 and IEC61235 standards
Top tube - �¦28 round foam filled tube to prevent penetration of humidity
Outer tube - pentagonal tube is not easy to slip and increases torque
Environmentally friendly paint free process can avoid paint damage or paint
peeling
2. Hook: �¦18 steel tube, U shaped fitting, can be used for high voltage detector.
3. Dielectric strength: 100kV/300mm
4. Adapter: Insulation material for universal end fitting
5. Push button: Simply operation
6. Handle: Rubber material to protect the tip
Round telescopic insulating height measuring rod is calibrated to metric scale. The main insulating rod is made of high strength epoxy glass fiber tube. The product has excellent electrical and mechanical properties.
The height measuring rod is light in weight and easy to operate, it can measure the height of overhead power line and communication line from the ground. The calibration of the product surface is clear and accurate, and the measuring error is not less than 5cm.
How to use it:
1.When the height measuring rod is used, the rod cap is opened, and the hook is tightened on the screw of the details, and then gradually pulled out to the two sections of the Chimera, with a little force, and the edge of the twist is pulled out to ensure that the vertical lines of the two sections of the scale are aligned, until the semicircle marks between the two sections form a circle, then verify that the snap is fully ejected to ensure a complete lock between the two sections.
2.After the use of the height of the bar after the draw, one hand holding the lower thick pipe, with the thumb to hold the snap button, the other hand holding the top of a thin section, twist the edge up push, take back section by section.
3.The hook of the height measuring rod is screwed down, and can be installed with an electric apparatus head, and can be used as an electric apparatus rod.
Scale reading method:
After hook the altimeter pole to the measured object, make sure the altimeter pole is perpendicular to the ground, then observe the figures of the hand-held altimeter pole, the upper end of the node is aligned with
the scale line, this number is the height of the object being measured.
Product Features
Insulating Stick for rescuing work in various live workplaces. It is used to grasp the injured person by the waist and bring them back to a protected area. It can also be used to push a cable away from a victim. Indoor and outdoor use.
Product Character ï¼?
1. Fiberglass Stick: meets ASTM F711, IEC 60855-1 and IEC61235 standards
Top tube - �¦28 round foam filled tube to prevent penetration of humidity
Outer tube - pentagonal tube is not easy to slip and increases torque
Environmentally friendly paint free process can avoid paint damage or paint
peeling
2. Hook: �¦18 steel tube, U shaped fitting, can be used for high voltage
detector.
3. Dielectric strength: 100kV/300mm
4. Adapter: Insulation material for universal end fitting
5. Push button: Simply operation
6. Handle: Rubber material to protect the tip
762 Scientific Instruments Suppliers
Short on time? Let Scientific Instruments sellers contact you.
The triangle tube of the telescoping hot stick have maximum convenience for the lineman because they permit them to perform many routine jobs from ground level. The universal end fitting on the insulated top section accepts a wide variety of attachments, so the lineman can disconnect switches, replace cutout tubes and reclose, remove pole covers, prune trees, replace bulbs and complete many other overhead tasks.
The triangular tube section is shown as below pictures, approximate triangular arc is the most comfortable shape of hand grip. approximately triangular shape can avoid axial sliding during torsional operation. Compared with the traditional round tube, it is more stable, easy to connect to the operating part and easy operation.
1.Applied Standard: IEC60855, ASTM F711.
2.Parts Materialï¼?
Universal head with hook: aluminum alloy in nature color
Tube : Top section: Foam filled fiberglass tube in fluorescence green,
Other sections: Fiberglass tube in yellow
Handle: Insulation rubber in black
Bag: Water-proof Nylon bag in green
3. Product featuresï¼?
3.1 Unique design - approximately triangular tube structure, each section can be quickly telescopic positioning, no need to turn the joint to find the buckle and fixed.
3.2 High visibility - The outer layer of the top tube is fluorescent paint for easy identification during operation, the inner part is filled with moisture-proof insulating foam to prevent moisture accumulation.
3.3 Easy to operate -New large button with same size, easy to operate even with insulating gloves.
3.4 Easy to maintain - the sticks body is smooth and nonporous, easy for daily cleaning and waxing.
3.5 Multi-function - high strength aluminum alloy universal joint, can firmly connect all kinds of tool heads.
3.6 Various specifications - Extract length from 2.43 to 15 meters, retract length from 0.8 to 2.15 meters.
3.7 High electrical insulation strength - All products are passed 100kV/300mm power frequency voltage test.
The round teles coping hot s t i c k s have maximum convenience for the lineman because they permit them to perform many routine jobs from ground level. The universal end fitting on the insulated top section accepts a wide variety of attachments, so the lineman can disconnect switches, replace cutout tubes and reclose, remove pole covers, prune trees, replace bulbs and complete many other overhead tasks.
The sticks are short,so that it can be easy carried on most trucks.The spring-loaded buttons can keep the extended tool sections securely locked in position. As each section is extended and twisted slightly, the buttons into right place to make sure the linemen well done the job.
1. Applied Standard: IEC60855, ASTM F711.
2. Parts Materialï¼?Universal head with hook: Aluminum alloy in nature color
Tube : Top section: Foam filled fiberglass tube in yellow,
Other sections: Fiberglass tube in yellow
Handle: Insulation rubber in black
Bag: Water-proof Nylon bag in green
Features
* Nice appearance and innovative design
* LED illuminator around lens
* Imported lens with plated layer
* 5.0 Mega pixels high resolution Korea sensor * Special DSP image processor, Optical Image Stabilizer
* Single/Dual lamp control.
* Single capture button and digital pause capture.
* Adjustable focus to give clear image.
* Auto white balance and contrast adjustment, Color Temperature Filter
* Dual image compare function
* 3D-Negative capture mode
* Compatible with iris lens, hair lens and skin lens.
* Deliver clear and accurate images.
* Easy to operate.
* Maximum resolution: 2560x1920
Since 2011, Orientjohn has been a leader in the design, manufacturing, and customization of telescoping poles. With over a decade of experience, we combine innovative design, advanced production techniques, and rigorous quality standards to deliver reliable solutions for demanding applications. Our Heavy Duty Telescoping Pole is engineered to meet the toughest requirements, offering durability, versatility, and ease of use for various industries and professionals.
Fruit Picker Telescopic Pole by Orientjohn
Established in June 2011, Orientjohn specializes in the design, development, and production of telescopic poles. With over a decade of expertise, more than 10 proprietary patents, and cutting-edge manufacturing capabilities, we deliver high-quality products and customized Telescopic Tool solutions that meet the unique demands of various industries.
Our semi-automated production lines ensure an annual capacity of over 1 million poles, combining efficiency with exceptional quality control to meet the growing demands of global markets.
Product Features: Fruit Picker Telescopic Pole
The Fruit Picker Telescopic Pole is engineered for efficient and safe fruit harvesting, providing a practical solution to common challenges faced in agriculture and gardening.
Product descriptions from the supplier
Overview
Metallurgical Microscope
Specifications
Model
JX-200E
Optical system
Finite color corrected optical system
Viewing head
Gemel trinocular,45 °inclined,Diopter adjustment ±5 for each side,Interpupillary distance adjustable between:54-75mm,refract rate,binocular : trinocular =80%:20%
Eyepiece
High eyepoint wide field plan eyepiece PL10X/18mm
High eyepoint wide field eyepiece WF15X/13
High eyepoint wide field eyepiece WF20X/10mm
Objective
LWD plan achromatic metallurgical objective 5X,10X,20X,50X,100X
Nosepiece
Reversed quadruple nosepiece
Reversed quintuple nosepiece
Focusing
Low position coaxial coarse and fine adjustment. With tightness adjustment. Coarse adjustment range 38 mm;precision of fine adjustment:2um
stage
Three-ply mechanical stage,area 180mmX155mm,right hand low position control,Moving range:75mm 40mm; Metal stage plate,center hole dia.�?12mm
Illumination
Reflection Koehler illumination with iris diaphragm and center able field diaphragm , wide-range voltage 90-240V ,6V/30W halogen bulb(single 3W LED option), with continuous intensity
Polarizing kit
Polarizer and the analyzer can be removed from the optical path, the analyzer can be rotated 360 .
TS - 30 s binocular continuous variable times a stered microscope
Product description:
TS - 30 s binocular continuous variable times a stered microscope using LED light source,
high resolution, high resolution and strong stereo feeling, etc, and can get times continuously.
Optical system about separate light path, towards a prism object into exactly, accord with human
physiology habit. PLAN10X eyepiece is high eyespots wide-angle eyepiece, the entire field of
view, wear glasses of workers are not subject to any restrictions. Perfect streamline design,
modelling beautiful generous, excellent optical system and reliably operating structure,
make the image more clear, more simple operation, and to bring you the new feeling.
Widely used in teaching demonstration, dissection, the seeds of agroforestry inspection
screening, * * department of forensic examination, electronic precision components
assembly maintenance, textile quality control, auxiliary differential stamps and all kinds of material surface observation.
Performance characteristics:
1, the continuous adjustable magnification
2, the LED light source, light is soft
3, modelling beautiful and easy, convenient operatio
4, separate light path, stereo sense is strong, clear imaging
5, using high eyespots wide-angle eyepiece, wide field of view, the field of flat.
Microscope technology parameters
Product descriptions from the supplier
Overview
Model
SW-200i
Optical System
Infinity corrected Achromatic optical system
Viewing Head
30�°gemel binocular viewing head with 360�° rotatable eyepiece tube, interpupillary adjustable distance: 50-75mm
30�°gemel trinocular viewing head with 360�° rotatable eyepiece tube, interpupillary adjustable distance: 50-75mm, fixed spectroscopic ratio R:T=80%: 20%
Eyepiece
PL10X/20T High eye-point wide-field plan eyepiece, field of view: 20mm,effective exit pupil distance: 19mm, diopter +/-5 adjustable
Objective
Infinity plan achromatic objective 4X,10X,20X,40X,100X
Nosepiece
Reversed quadruple nosepiece
Stage
150x140mm mechanical stage with underhand, moving range: 76x50mm, precision: 0.1mm, with damping clips
Condenser
N.A.1.25 Koehler illuminator condenser(with socket for phase contrast and dark-field accessories)
Focusing
Integrated all-metal high-pressure die-casting (HPDC) body, precision transmission mechanism with pinion and rack. Coarse focusing scope: 30mm, with tightness adjustment and place limit set, fine adjustable precision: 0.002mm
LED fluorescent reflected illumination
UV2 ultraviolet long-pass type LED module, with intensity adjusting knob, and switch knob for bright field and fluorescence, central wavelength: 365mm
B4 LED fluorescence module dedicated for TB, with intensity adjusting knob, and switch knob for bright field and fluorescence, central wavelength: 455mm
B1 band-pass type fluorescence module, with intensity adjusting knob, and switch knob for bright field and fluorescence, central wavelength:470mm
G1 band-pass type LED fluorescence module, with intensity adjusting knob, and switch knob for bright field and fluorescence, central wavelength: 560mm
Other various LED modules for option, which can be custom-tailor according to the needs of clinical diagnosis.
Transmitted Illuminator
100V-240V_AC50/60Hz wide range voltage, single high brightness 3W LED(predetermine filament center), intensity continuously adjustable
Advantage BODY detector
* Accurately grasp the effect of training and provide scientific basis for formulating training plan.
Reasonably reduce and control weight to maintain optimal physical fitness.
Distinguish between muscular overweight and obesity, and seek the best way to control weight.
Guide the ratio of energy intake and nutrient intake in the diet.
Guide to take nutritional recovery measures to promote maximum muscle synthesis
*Evaluate the effects of physical therapy and rehabilitation, and guide scientific training, scientific rehabilitation, and scientific nutrition.
Understand and test the physical and health status of young people, and develop practical exercise plans.
Understand the impact of environment, nutrition and other factors on body composition.
Understand the differences in the composition of different groups of people.
As an important preventive measure to reduce the incidence of cardiovascular, diabetes, certain cancers and other chronic diseases.
TDS meter is a tester measures total dissolved solids(minerals, salts or metals) in water, TDS-3 has one screen and three buttons on its face, one clip on its back, very simple to use and carry. Comes with a leather case to protect it from damages, ideal for home and commercial water quality checking and monitoring.
Specification
TDS meter is a water quality tester measures total dissolved solids(minerals, salts or metals) in water, TDS-3 has one screen and three buttons on its face, one clip on its back, very simple to use and carry. Comes with a leather case to protect it from damages, ideal for home and commercial water quality checking and monitoring.
Features
Hold function saves readings
Auto-off turns off in 10minutes to save batteries
Factory calibrated
Customised label and logo
Technical data
Testing Range: 0-999ppm
Accuracy: 2%
Battery: 2x1.5V(button cell)
QN-Kit06 Outdoor Receiver 2 Channel Rolling Code and Fixed Code Garage Door Gate Receiver
Feature
1.2-Channel or 4-Channel independent set-up ; remote control unit ;
2. Can learn up to 149 codes; (can be customized);
3. Costomized frequency such as 433.92Mhz, 315Mhz ,868Mhz ;
4. Power supply : 9V-24V DC/AC ;control unit;
5. Relay Spec.: 12A 14VDC or 7A 120VAC ;
6. CE proved ;
7. Outdoor usage, waterproof;
8. Working range: 100m
Usage
1. For garage door use remote control unit;
2. Wireless working within 100m (can be customzied);
Model No.: QN-Kit06
Power supply: 9-24V DC/AC
Measure Type: Fixed Code & Rolling Code
Relay spec: 12A 14VDC or 7A 120VAC
Operating distance: 100m
Gurantee: 1 Years
Modulation: Ook/Ask/Fsk
Application: : garage door opener,alarming system,security system,vehicles etc
HS Code: 85269200
Power Adapter: Yes
MOQ: 500
CE: Yes
Brief Introduction
The MPG-6099 multiparameter water quality meter is new generation water quality analyzer developed by BOQU Instrument,it s can be designed to measure different water quality parameters as customers need, such as pH,ORP,Dissolved oxygen,Turbidity,Suspended solid(TSS,MLSS),COD,Ammonia nitrogen(NH3-N),BOD,Color,Hardness,Conductivity,TDS,Ammonium(NH4+),Nitrate(NO3-),Nitrate nitrogen(NO3-N) etc.
Technical Features of Multi-parameters Water Quality Meter
1)Real-time water quality measurement.
2)All water quality sensor is RS485 Modbus ensure precision to collect data.
3)Easy operation,all operation will will in one touch screen.
4)Datalogger function,all measured data will be recorded.
5)Download,MPG-6099 multi-parameters water quality meter is with USB interface, user can download report by excel type.
6)Wireless function for operation,users only need insert local SIM card,then they can check all data on mobile App or website.
Brief Introduction
The MPG-6099 multiparameter water quality meter is new generation water quality analyzer developed by BOQU Instrument,its can be designed to measure different water quality parameters as customers need, such as pH,ORP,Dissolved oxygen,Turbidity,Suspended solid(TSS,MLSS),COD,Ammonia nitrogen(NH3-N),BOD,Color,Hardness,Conductivity,TDS,Ammonium(NH4+),Nitrate(NO3-),Nitrate nitrogen(NO3-N) etc.
Technical Features of Multi-parameters Water Quality Meter
1)Real-time water quality measurement.
2)All water quality sensor is RS485 Modbus ensure precision to collect data.
3)Easy operation,all operation will will in one touch screen.
4)Datalogger function,all measured data will be recorded.
5)Download,MPG-6099 multi-parameters water quality meter is with USB interface, user can download report by excel type.
6)Wireless function for operation,users only need insert local SIM card,then they can check all data on mobile App or website.
762 Scientific Instruments Suppliers
Short on time? Let Scientific Instruments sellers contact you.
