Find Verified Aluminum Bars Suppliers, Manufacturers and Wholesalers

Aluminum Sulfate Formula

Formula: Al2(SO4)3

Molar mass: 342.15 g/mol

IUPAC ID: Aluminum sulfate

Melting point: 770 C

Density: 2.67 g/cm

Soluble in: Water

Aluminum Sulfate Classification: Alum compounds

Industrial sulfonic acid.
Laboratory sulfonic acid.
Molecular formula: .HSO3R

Purity: sulfonic acid

Appearance: pale gray powder

#Aluminum_Sulfate use for

#Aluminum_Sulfate has many different uses in day-to-day life, as well as being used in several essential industries.

Interesting uses of aluminum-sulfate around the house are in gardening. Because #aluminum_sulfate is extremely acidic, itâ??s sometimes added to very #alkaline soils to balance the pH for plants. When the #aluminum_sulfate comes into contact with water, it forms #aluminum_hydroxide and a much diluted sulfuric acid solution, which alters the soil acidity.

All levels of crude #aluminum_sulfate can be used for water purification and water treatment ; #aluminum_sulfate used for purification cannot be produced by waste acid toxic substances.

#Aluminum_Sulfate use for

#Aluminum_Sulfate has many different uses in day-to-day life, as well as being used in several essential industries.

Interesting uses of aluminum-sulfate around the house are in gardening. Because #aluminum_sulfate is extremely acidic, itâ??s sometimes added to very #alkaline soils to balance the pH for plants. When the #aluminum_sulfate comes into contact with water, it forms #aluminum_hydroxide and a much diluted sulfuric acid solution, which alters the soil acidity.

All levels of crude #aluminum_sulfate can be used for water purification and water treatment ; #aluminum_sulfate used for purification cannot be produced by waste acid toxic substances.

Aluminum Sulfate Packing

We have three kind of Aluminum-Sulfate Packing :

30Kg bag

25Kg bag

1 Ton Jumbo bag

Pleas check album

Dear buyer,

Thanks for the interest in our quality Aluminium Ingots 99.97%
We can supply you on a consistent basis.

ORIGIN: EUROPE
LOADING PORT:
MONTHLY & TRIAL ORDER: 5000 TONS -10,000 TONS
PACKAGING: BULK
INCOTERM: CIF
DESTINATION PORT:AWSP
TRANS-SHIPMENT IS ALLOWED
INSPECTION:BY SGS ATH THE SELLER\'S EXPENSE AT PORT OF LOADING.

CIF RATE: LME rate Minus 15( fifteen percent)

PAYMENT TERM: IRREVOCABLE CONFIRMED & TRANSFERABLE LETTER OF CREDIT ISSUED UNDER MT700

*** We do not offer 2% performance bond because we are sole responsible for the product delivery to your destination port and ONLY then is the payment release.

If you require a 2% PB, you will have to make a deposit payment of 5% of the shipment,and 95% payment will be be at destination port.

Kindly issue an ICPO + CIS + POF

One component high-quality, flexible joint sealant based on acrylic dispersions. 0dorIess.Easy to use.Use for sealing PVC and aluminum windows. UV and water resistant. %12,5 joint movement capacity. Good adhesion to PVC, aluminum, wood, concrete and many construction materials.

Steel bars

Multi-purpose, one component sealant. It cures on exposure to atmospheric moisture to form a highly durable and flexible sealant. Formulated to offer outstanding primer-less adhesion to most common building materials including vinyl, aluminum, steel, concrete, wood and dlass. It can be applied and tooled under most weather conditions.

Product Code Product Description

PRS-KA0552 Manual (Hand Operated) Pressure System for Lateral Pressure in Hoek Triaxial Cell

PRS-B4231 2000 kN Automatic Compression Testing Machine, 220-240 V 50-60 Hz

PRS-KA0555 Hoek Triaxial Cell BX, Ã? 42,04 mm dia.

PRS-KA0557 Hoek Triaxial Cell NX, Ã? 54,74 mm dia.

PRS-KA0560 Hoek Triaxial Cell HQ, Ã? 63,5 mm dia.

PRS-KA0568 Compression Jig Assembly for Rock Core Specimens

PRSGE-3800 Hydraulic Hand Pump, 700 bar.

PRSC-0210 High Precision Pressure Transducer and Electronics

STANDARDS : EN 1926, 14580; ASTM D2664, D2938, D3148, D5407
The manual pressure system is used for maintaining the constant lateral pressure in the Hoek triaxial cells and consists of a hydrolic hand pump with oil reservoir (PRSGE-3800), a precision LPI digital readout unit (PRS-B4920), a pressure transducer (PRSGM-0110) and a 3 m long flexible hose with quick release coupling.
The manuel pressure system is used with any Hoek triaxial cell and 2000 kN Automatic Compression Testing Machine (PRS-B4231) for the triaxial tests. Other type of PARSROS compression testing machine (respect to the capacity) can be used instead of PRS-B4231.

Technical Specifications LateralPressure Equipment PRS-B4231
Max. Working Pressure 700 bar (70 MPa) 410 bar
Dimensions 1050x500x300 mm 800x500x970 mm
Weigth (approx.) 20 kg 795 kg

Neutral cure high performance silicone sealant designed for a wide range of building and construction joints. Excellent primesless adhesion to numerous porous and non-porous substrates. Noncorrosive. Excellent wheather ability in direct sun light, rain, snow and ozone. Fast curing. Low modulus, high elasticity. %100 Silicone. Very Iow odour. Building and construction joints. Wheatherseal applications. Expansion and joint sealant in precast concrete, wood, aluminum and pvc windows.

Structure Size : 58-63-74-81-93 / MR65-MR71-MR-80/112
Rated Power : 1.1-7.5 kW
Pole Number : 2 - 4
Protection Class : IP55
Voltage : 380 V
Frequency : 50 Hz
Build Type : B3
Mechanical Structure : Aluminum or Iron Body
Cooling Type : IC 411
Insulation Class : F
Working Regime : S1, S6- 40%
Ambient temperature : 40 C
Motor Protection -

RYT-4220 : Plate Bearing Test Set 200 kN Capacity

RYT-4222 : Plate Bearing Test Set 500 kN Capacity

Plate Bearing Test Set is performed for the determination of the bearing capacity of a soil in-situ on road constructions, foundations, road subgrades, airport and highway pavements. A wide range of plate bearing test equipment are available, together with many accessories according to the different Standards and specific enduser needs. All test sets supplied complete with 1,5 m long flexiable hose with quick release coupling.

The RYT-4220 Plate Bearing Test Set 200 kN is supplied complete with:

Dimensions : 650x350x600 mm

Weight : 130 kg

200 kN Capacity Piston Assemly

Hydraulic Hand Pump,

Pressure Transducer,

Datum Bar - 2.4 m long , 3 pcs.

25 mm travel x 0.01 mm digital dial gauges with dial supports,

300 mm and 450 mm dia. loading plates,

The RYT-4222 Plate Bearing Test Set 500 kN is supplied complete with:

500 kN Capacity Piston Assemly
Hydraulic Hand Pump,
Pressure Transducer,
Datum Bar - 2.4 m long , 3 pcs.
25 mm travel x 0.01 mm digital dial gauges with dial supports,
600 mm and 760 mm dia. loading plates

PRS-ZE1200 : Plate Loading Test Set with Digital Dial Gauges & LPI Digital Readout Unit, 200 kN

PRS-ZE1201 : Plate Loading Test Set with Digital Dial Gauges & LPI Digital Readout Unit, 500 kN

PRS-ZE1202 : Piston Assemly, 200 kN capacity, for Plate Load Bearing Test Sets

PRS-ZE1203 ; Piston Assemly, 500 kN capacity, for Plate Load Bearing Test Sets

PRSGE-3800 : Hydraulic Hand Pump, 700 bar.

PRS-ZE1204 ; Loading Plate Ã? 300 mm for PRS-ZE1200

PRS-ZE1205 : Loading Plate Ã? 450 mm for PRS-ZE1200

PRS-ZE1206 ; Loading Plate Ã? 600 mm for PRS-ZE1201

PRS-ZE1207 ; Loading Plate Ã? 760 mm for PRS-ZE1201

PRS-ZE1220 : Plate Loading Test Set, with Displacement Transducers and Data Logger, 200 kN

PRS-ZE1221 : Plate Loading Test Set, with Displacement Transducers and Data Logger, 500 kN


This test method is used to estimate the bearing capacity of a soil under field loading conditions for a specific loading plate and depth of embedment (ASTM D1194). It is also used for load tests of soil and flexible pavement components for use in evaluation and design of airport and highway pavements.

PRS-ZE1200 Plate Loading Test Set consists of a 200 kN capacity piston assemly and hydraulic hand pump, pressure transducer, LPI battery operated digital readout unit, 2.4 m long datum bar, 3 pcs. 25 mm travel x 0.01 mm digital dial gauges with dial supports, 300 mm and 450 mm dia. loading plates,


PRS-ZE1201 Plate Loading Test Set Set consists of a 500 kN capacity piston assemly and hydraulic hand pump, pressure transducer, LPI battery operated digital readout unit, 2.4 m long datum bar, 3 pcs. 25 mm travel x 0.01 mm digital dial gauges with dial supports, 600 mm and 760 mm dia. loading plates.


All test sets supplied complete with 1,5 m long flexiable hose with qu

L Shape Box Apparatus

Product Code Product Description

PRS-B0545 L Shape Box Apparatus

STANDARDS : EN 12350-9

The PRS-B0545 L Shape Box is used for determining the passing ability rate of freshly mixed self compacting concrete.

The distance between 12 mm diameter bars can be set between 41±1 mm or 59±1 mm.

L Shape Box is designed for ease of cleaning the vertical and horizontal hoppers.

The L Shape Box Apparatus is supplied complete with;
Filling Hopper
Base

Dimensions 300x1000x1350 mm
Weight (approx.) 35 kg

Our exclusive manufacturer client is producing powder metals for various industrial applications most notably 3D printers and augmented manufacturing. The exceptional product portfolio is tested and approved by leading corporate buyers in Turkey and now we are going global. Our partner excells the highest standards during production and achieves the best quality at water atomization and VIGA (Vacuum Induction Gas Atomization) techniques both.

Some of the final products for your requirements are as follows: Copper (Cu), bronze (85/15, 90/10), stainless powders (304, 316L), tin (Sn), aluminum (Al), zinc (Zn), Al12Si / AlSi10Mg.

Contact us for more details.

Hello

We are able to supply monthly 100,000 MT of Aluminum Bauxite,
Silicon Oxide as well as other minerals included.

We work on a FOB/CIF basis. The product is situated close to Iskenderun
port in Turkey.

We are okay with visits to check sites and material for confirmation
once this is done, then we can sign an annual contract.

Specifications:

45.5%Min - 51% Al203
3% Min -max 7% SiO2
5% min - max 8% TiO2

Minimum Order Quantity is 55,000Ton

The CFR rate is $95/ Ton

Payment term : LC at site with payment at loading portin Turkiye or Guinea.

LC at Destination Port ONLY for Chinese ports


Thanks and we hope to read from you.

Water Impermeability Tester ( 3 Unit )

Product Code Product Description

PRS-BWIT3 Water impermeability Tester ( 3 Unit )

STANDARDS : TS EN 12390-8,EN 12364,DIN 1048,ISO 7031

Apparatus at 3 or 6 points to determine the depth of penetration of the water into the concrete (impermeability) under known time and pressure The unit accepts up to 3 concrete cubic, cylindrical or prismatic specimens having max. dimensions of 200x200x200 mm

The specimen is put into the test chamber, clamped with suitable flanges and gaskets, and then a known water pressure is applied on the specimenâ??s surface for a time as requested by Standard, by using a suitable air compressor (accessory) having at least 5 or 20 bar pressure capacity

The water penetrated is measured by breaking the specimen, or by reading the water permeated through the graduated burette fixed on the front panel

Dimension 1290 x 450 x 1280 mm

Weight 120 kg (app.)

Air Entrainment Meter for Mortar

Product Code Product Description

PRS-CM0066 Air Entrainment Meter for Mortar 1 lt.

STANDARDS : EN 413-2, 459-2, 1015-7

The PRS-CM0066 Air Entrainment Meter for Mortar is used for determining the air content of cement paste, cement mortar and lime mortar. The air entrainment meter is manufactured from cast aluminum, the upper part and the lower test pot are held together with an air-tight seal which are easily adjusted by using the two spring clamps.

The pressure gauge is installed in the head of the meter and the scale works in the 0-20 volumetric % range. The air is compressed with a hand pump installed in the system and the smart configuration of the test and correction buttons enables fast and simple testing.

Dimensions 200x200x320 mm
Weight (approx.) 3,5 kg

PRS-ZE0180 : Semi-Automatic Penetrometer for Liquid Limit, 220-240 V 50-60 Hz

PRS-ZE0180/110 : Semi-Automatic Penetrometer for Liquid Limit,110 V 60 Hz

PRS-ZE0182 : Liquid Limit Penetration Test Cone 30° Angle,Stainless Steel

PRS-ZE0183 : Cone Test Gauge for PRS-ZE0182

PRS-ZE0184 : Liquid Limit Penetration Test Cone 60° Angle,Stainless Steel

PRS-ZE0185 : Cone Test Gauge for PRS-ZE0184

PRSGH-1425 : Moisture Content Tin with Lid Ã?:55 mm x h:35 mm, Aluminum

PRSGH-1435 : Moisture Content Tin with Lid 75 mm x h:50 mm, Aluminum

A Cone Penetrometer is used to determine the moisture content at which clay soils pass from a plastic to a liquid state, and used also for the determination of undrained shear strength.
The PRS-ZE0180 Semi-Automatic Penetrometer for Liquid Limit consists of a cast iron base with course and fine leveling screws, a digital penetration measurement gauge 0.01 mm resolution/readibility and an automatic penetration timer unit.

The PRS-ZE0180 is equipped with a digital, 99 second timer, which can be set to the standard 5 second free-fall time or to some other setting for customized tests. When engaged the timer will allow the needle to free fall into the sample for the specific time interval and then lock the needle from advancing while providing a direct reading of the test results. 320 g weight should be added to the 30° angle cone to get a total weight of 400 g for the shear strength test.

Semi-Automatic Penetrometer for Liquid Limit supplied complete with;
Automatic Penetration Timer Unit,
30° Penetration Cone
Sample Cups, 3 pcs. Aluminium, Ã?55 mm x h:35 mm.

Product Code Product Description

PRS-ZE0250 Plastic Limit Test Set

PRS-ZE0252 Plastic Limit Reference Rod Ã? 3x100 mm

PRS-ZE0254 Plastic Limit Plate 300x300x5 mm, Glass

PRSGH-1433 Porcelain dish, 120 mm dia.

PRSGG-2170 Moisture content tin with lid, Aluminum, Ã?:75 mm h:30

PRSGH-1495 Spatula, small, length:120 mm

STANDARDS : ASTM D4318; AASHTO T90; BS 1377:2; UNE 103-104; UNI 10014

The plastic limit (PL) is defined as the lowest moisture content of a soil that will permit a sample to be rolled into threads of 3 mm diameter without the threads breaking.

The Plastic Limit Test Set is supplied complete with
Glass Plate, 300x300x5 mm
Steel Reference Rod
Moisture Content Tins, Ã?:75 mm h:30, 6 pcs.
Porcelain Mixing Dish, 120 mm dia.
Spatula, 120mm
Carrying Case

Dimensions 360x370x180 mm

Weight (approx.) 3 kg