Find Verified Mechanical Seals Suppliers, Manufacturers and Wholesalers

MB1-GAS is a Specially Designed Non-Contacting Gas Seals for cryogenic applications, thanks to its Design of Metallic Bellow Construction which eliminates the dynamic O Ring, & Can be Safely Used in most commonly used Industrial Gaseous in Liquid Form.

Operating Parameters

Shaft Dia.: 18 to 100mm
Pressure: up to 15 Bars
Temp.: -196 �°C to Ambient
Speed: up to 10000 rpm

Material

Seal Faces: Carbon/Sic/TC
Secondary Seals: FFKM/FKM/HNBR
Metal Components: SS-316/Hast-C/Inconel-718

Grasso RC 11 and RC 12 Metal Bellow Seals From Seal Family MB1 are commonly used for Compressors, MB1 provides a high degree of axial flexibility to compensate for lack of concentricity of the shaft or misalignment due to thrust movement of the shaft. Moreover, these seals are used for high temperature application such as refinery, Petrochemical, and Oil & Gas industries. These seals do not have a dynamic o rings eliminating the fretting of Shaft or Sleeve.

Salient features:

Welded Diaphragm Bellow Design
Suitable for High Temperature Media.
Axial compensation of movement 1 mm.
Perfect for standardization purposes.
No Dynamic O Rings
Inherently Balanced Design

Applications:

Specially used in paper and pulp Industries, petrochemicals, petroleum refinery etc.

Material:

Seal Faces: Ceramic/Sic/Carbon Vs Ceramic/RB Sic./TC
Secondary Seals: Viton/PTFE/GFT/FFKM
Metal Components: SS-316/Hast-C/Carpenter-42
Bellow: AM-350/Hast-C276/Inconel-718

EB60C are Single and Double Cartridge Seal used for large number of applications & suits for both ANSI & DIN Standard Pumps. These can be used as API â?? 682, Type A Category 1 Seal arrangement, Seal Ring is design to withstand reversed Pressure. 2EB60C is a Double Seal with Tandem arrangement Suitable for Media with solid particles. These seals can also be used in highly viscous medium with moderate temperature. Industries Serve are Automobile, Petrochemical, and Oil & Gas industries. These seals require a less Axial & Radial Space for installation.


Salient features:
Suits API-682 Standard
Suitable for Slurry Application.
Fits in both ANSI & DIN Standard Pumps
Two Way Balanced Design
Minimum Components

Applications:

Specially used in paper and pulp Industries, petrochemicals, petroleum refinery etc.

Material:

Seal Faces: Ceramic/Sic/Carbon Vs Ceramic/RB Sic./TC
Secondary Seals: Viton/PTFE/GFT/FFKM
Metal Components: SS-316/Hast-C/Carpenter-42

Grasso RC 10 Metal Bellow Seals From Seal Family MB1 are commonly used for Compressors, MB1 provides a high degree of axial flexibility to compensate for lack of concentricity of the shaft or misalignment due to thrust movement of the shaft. Moreover, these seals are used for high temperature application such as refinery, Petrochemical, and Oil & Gas industries. These seals do not have a dynamic o rings eliminating the fretting of Shaft or Sleeve.

Salient features:

Welded Diaphragm Bellow Design
Suitable for High Temperature Media.
Axial compensation of movement 1 mm.
Perfect for standardization purposes.
No Dynamic O Rings
Inherently Balanced Design

Applications:

Specially used in paper and pulp Industries, petrochemicals, petroleum refinery etc.

Material:

Seal Faces: Ceramic/Sic/Carbon Vs Ceramic/RB Sic./TC
Secondary Seals: Viton/PTFE/GFT/FFKM
Metal Components: SS-316/Hast-C/Carpenter-42
Yellow: AM-350/Hast-C276/Inconel-718

Bitzer Metal Bellow Seals From Seal Family MB1 are commonly used for Compressors, MB1 provides a high degree of axial flexibility to compensate for lack of concentricity of the shaft or misalignment due to thrust movement of the shaft. Moreover, these seals are used for high temperature application such as refinery, Petrochemical, and Oil & Gas industries. These seals do not have a dynamic o rings eliminating the fretting of Shaft or Sleeve.

Salient features:

Welded Diaphragm Bellow Design
Suitable for High Temperature Media.
Axial compensation of movement 1 mm.
Perfect for standardization purposes.
No Dynamic O Rings
Inherently Balanced Design

Applications:

â?¢ Specially used in paper and pulp Industries, petrochemicals, petroleum refinery etc.

Material:

Seal Faces: Ceramic/Sic/Carbon Vs Ceramic/RB Sic./TC
Secondary Seals: Viton/PTFE/GFT/FFKM
Metal Components: SS-316/Hast-C/Carpenter-42
Bellow: AM-350/Hast-C276/Inconel-71

High Pressure Dual Mixer Seal (2FB14) are high pressure double seals that are used for top entry and side entry autoclaves & mixers. These seal are used in all kinds of mixers, reactors, driers in pharmaceuticals, paints, pulp & plastic industries. The seals are factory assembled with cartridge unit, therefore can easily be installed without disturbing the delicate mating faces. For larger shaft deflection special version with integrated floating bearing is provided.

F14 are multi spring pusher seals, these are widely used in oil and gas, petrochemical and pharma industries, these seals can be easily installed in low axial and radial space due to its compact design. pusher seals can be used in single and double arrangement,

Features
Avoids sticking and clogging
Can tolerate more pressure than a non-pusher seal
Internally mounted

Product Specifications:
Material: Metal
Speed: 15m/s
Applications: Sugar Industry, Paper Industry & Pulp Industr

- O Rings / -Hydraulic & Pneumatic
Seals -Rubber
Extrusions/Sheets
- Diaphrams
Materialsepdm/fkm/vitonnbr/ Silicon etc

We are the manufacturer and distributer of all kinds of sealing products such as O rings, Glide rings, Grommets, Omni seal, Ring (Strips). These products widely used for Hydraulic system assemblies, Bore and piston assemblies, Oil sealing units, Pneumatics assemblies. and other all type of sealings solutions can be provided. We can be able to supply huge quantity as per your requirements world wide.

Key Specifications/Special Features :
As per customers requirement

Mechanical-Seals

Carbon-Seals

Oil seals

O-rings

Pump Parts

Weâ??re offering full line of rubber products such like O-Ring (AS 568, BS 4518, Metric, SMS 1586, GB/T 3452.1, JIS B2401, JASO F404), X-Ring, Back-Up Ring, Square Ring, Washer, Packing, U-Packing, Grommet, Diaphragm, D-Ring, VA-Seal, Rubber-to-Metal(Metal-bonded rubber components), Hydraulic seals, Medical rubber components, TPE & TPU components, Rubber parts for Sanitary & Drinking water system, OEM and other custom molding rubber components.

Materials used to manufacture these rings are EPDM based soft Thermoplastic Elastomer (TPE) & hard Thermoplastic Elastomer (TPE) for tight fitment and leak proof performance.

ENGINE OIL SEAL
TRANSMISSION SEAL
O-RING
CHASSIS SEAL

Fi-Way offers a wide range of Mechanical and Electrical Power Transmission products with access to over 400 manufacturers including industry leaders such as Gates, IPL, Mecro, Optibelt, Renold, Rexnord and Tsubaki. We stock most individual product lines for speedy delivery, We also offer specialist chain-cutting, belt-cutting and belt welding services.

By sourcing or custom manufacturing a thorough range of seals and O rings , Fi-Way supply complete sealing solutions to meet every requirement. Every year, Fi-Way supplies high amount of rings. What's more, Fi-Way has Larger Number of seal references available, including a full range of ancillary products, plus tailored and profiled packages for volume and manufacturing users. We give you a comprehensive product choice, from a trusted, quality supplier

Manufacture and Supply of:
Mechanical Seal & Sealing System
Pumps
Casting
Extruded

Plastic Security Seals

Material - Steel
Use - As a barrier for materials in the pump and outside atmosphere
Pressure - Max 40 bar

Other Details:
The Compressor Seal complies with international quality standards.
The precision in construction helps in assuring zero leakage at the application area.
They are compatible with compressors of brand Accel, Alfa Laval, Batiboi, Bitzer, Carrier, Copland, Daikini, Grasso,
Ingerssoll Rand, Kirloskar, Mycom, Sabroe, Trane, Voltas, York, BOCK, MCQUAY, Gram and Vilter.

Pressur : Upto 2 MPa / 20 Bar (g) max
Shaft Diameter : d:1 1.000, 4.000 mm
Temperature : -40 Degree C + 176 Degree C
Speed : Upto 4500 fpm/ 23 m/s

Other Details:
Size - As per buyer requirement

Material : Steel
Application : Automobile Industry
Shaft Diameter : 10.0, 80.0 mm
Pressure : 10 Bar (max)
Temperature : 20 to 140 Degree Celsius
Metal Parts : SS 306, SS 304
Velocity : 15 m/s

Conical Spring Seals

Pressure : Upto 2 MPa / 20 Bar (g) max
Shaft Diameter : d:1 18.0, 100.0 mm
Temperature : -40 Degree C + 176 Degree C
Speed : Upto 4500 fpm/ 23 m/s
Metal Parts : Alloy C-276

Metal Components - SS-316 / SS-304
Secondary Seals - Viton / PTFE /GFT
Seal Faces -Ceramic,Sic,Carbon Vs. Ceramic RB Sic,TC
Shaft Dia - 25 to 150mm
Pressure - Up to 15 Bars
Speed - Up to 25 m/s

We are a unique name in this industry to provide our prestigious clients an exclusive range of Stationary Mounted Dual Seal.

Shaft Dia : 25 to 100mm
Metal Components SS-316 Operating Limits
Secondary Seals : Nitrile/ Neoprene/Viton/PTFE
Seal Faces : Carbon Vs Ceramic/Sic./TC
Temperature : -50 to 150 Degree C
Pressure : Up to 1.40 MPa

Backed by our expert and experienced professionals, we provide Agitator Seal

Shaft Dia : 25 to 100mm
Pressure : Up to 1.40 MPa
Speed : Up to 1 m/s
Metal Components SS-316
Seal Faces : Carbon Vs Ceramic/Sic./TC
Secondary Seals : Nitrile/ Neoprene/Viton/PTFE
Temperature : -50 to 150 Degree C

Being a quality oriented organization, we are involved in providing a supreme quality range of Dry Running Seal.

Applications : Paper And pulp industries, Petrochemical industries, Dyeing industries
Seal Faces : Sic, Sic/Ceramic, TC
Secondary Seals : Viton, PTFE, GFT, Karlez
Metal Components : SS-316, Hast-C, Monel
Shaft Diameter : 25 to 150mm
Pressure : Up to 45 Bars
Speed : Up to 25 m/s
Temperature : -50 to 160 Degree C

With vast industrial experience, we are involved in offering a wide range of Stationary Mounted Cartridge Seal

Applications : Paper And pulp industries, Petrochemical industries, Dyeing industries
Seal Faces : TC, Sic/Ceramic, Sic
Secondary Seals : Viton, PTFE, GFT, Karlez
Metal Components : SS-316, Hast-C, Monel
Shaft Diameter : 25 to 150mm
Pressure : up to 45 Bars
Speed : Up to 25 m/s
Temperature : -50 to 160 Degree C

We are presenting an excellent quality assortment of Cartridge Seal.

Metal Parts SS 316, SS 304
Velocity V 10m/s
Pressure P 16 bar(max)
Temperature -20 dig C to +140 dig C
Shaft diameter : 10mm-100 mm
Elastomers : NBR, Viton, EPDM
Applications : Water & Waste Water, Chemical Industry, Sulfide Slurries

Being a quality oriented organization, we are involved in providing a supreme quality range of Rubber Bellow Seals.

Application : Petrochemical, Chemical Industry, Oil Application, Petroleum refinery
Shaft Diameter : 0.625 - 4 inch
Pressure : 25 bar(max)
Velocity : 20 m/sec
Face Material : Silicon, Carbon,Ceramic
Metal Parts : NBR,Viton
Temperature : 70-200 Degree C

Being a customer oriented organization; we are deeply engaged in offering a wide array of Single Coil Spring Balance Seal.

Other Details:
Size di d d3 d4 d6 d7 L Ll
0.625 15.87 12.7 27 29 -- -- 40 --
0.75 19.05 15.87 31 32.5 -- -- 43 --
0.875 22.22 19.05 33.8 35.6 -- -- 43 --
1 25.4 22.22 37 38.8 35.2 41.4 35 11.1
1.125 28.58 25.4 40 43 38.4 44.6 49 11.1
1.25 31.75 28.58 43.5 46.2 41.5 47.7 51 11.1
1.375 34.92 28.58 50 52.5 44.7 50.9 51 11.1
1.5 38.1 31.75 52.8 55.7 47.9 54.1 59 11.1
1.625 41.28 34.92 57.8 60.4 54.3 60.4 59 12.7
1.75 44.45 38.1 59 62.2 57.4 63.6 66 12.7

Material - Alloy-C-276
Application - Refinery Applictions for low as well high Temperature, Oil and Gas Industry, Petrochemical industry
Shaft Diameter - 20.0-110.0
Presure - Upto 2MPa/20 bar (g) Max
Speed - Upto 9800fpm/50 m/s
Elastomers : Flexible Graphite
Temperature : -40 dig C - +400 dig C

Other Details:
d d1 d2 d3 d4 L1+ L2+ L3+
20.0 25.0 47.0 51.0 48.0 38.0 17.0 31.0
24.0 29.0 50.0 54.0 51.0 38.0 17.0 31.0
28.0 32.0 53.0 57.0 54.0 38.0 17.0 31.0
31.0 36.0 57.0 61.0 58.0 38.0 17.0 31.0
33.0 39.0 60.0 65.0 61.0 41.0 20.0 31.0
35.0 42.0 63.0 68.0 64.0 41.0 20.0 31.0
39.0 45.0 68.0 71.0 67.0 41.0 20.0 31.0
42.0 48.0 69.0 74.0 70.0 41.0 20.0 31.0
45.0 51.0 72.0 77.0 73.0 41.0 20.0 31.0
47.0 54.0 75.0 81.0 77.0 43.0 22.0 31.0
50.0 58.0 79.0 84.0 80.0 43.0 22.0 31.0

Material - Alloy-C-276
Application - Low-temp refinery services, Acid, Cautics
Shaft Diameter - D1: 18-100
Presure - Upto 2MPa/20 bar (g) Max
Speed - Upto 4500fpm/23 m/s
Elastomers - FKM (Optional FFKM, PTFE)
Temperature : -40 dig C - 176 dig C

Other Details:
d1 d4 Lb L2+
18 32 27.5 15.5
20 33.4 27.5 15.5
22 36 27.5 15.5
24 38.1 30 15.5
25 39 30 15.5
28 42 32.5 15.5
30 44 32.5 15.5
32 46 32.5 15.5
33 47 32.5 15.5
35 49.2 32.5 16.5
38 52.4 34 16.5
40 55.6 34 16.5
43 58.7 34 16.5
45 58.7 34 16.5
48 61.9 34 16.5
50 65.1 34,5 16.5
53 68.3 34.5 16.5
55 71 34.5 16.5
60 74.6 39.5 16.5
65 84.1 39.5 16.5
70 87.3 45 16.5
75 95.3 45 16.5
80 98.4 44.5 16.5

Capacity - 7.5 litre
Design Pressure - 10 bar
Level Gauge - To indicate barrier fluid
Manual Feed- Pump 2 ltrs (optional)
Hydraulic Test Pressure - 15 bar
Working Temprature - 180 dig C
Thermosyphon Shell Material Carbon Steel,SS 316,SS 304
Cooling Coil material - SS 316,SS 304
Heat Transfer Area Of Cooling Coil - 0.266m2
Cooling Water Flow Rate Recommended - 10 litre/min
Secondary Seals - Elastomers
Pressure Guage - 0-10, 0-25, 0-40 bar

* This is used for double mechanical seals in tandem or back to back arrangement to provide necessary lubrication and cooling to the seal faces to achive recommended seat life and comes equipped with cooling coil inside the shell to bring down the temperature of barrier fluid coming from seat to thermosyphon.

Connection Specifications:
Cooling water inlet: 1/2" NPT(F)
Cooling water outlet: 1/2" NPT(F)
Barrier fluid inlet: 1/2" NPT(F)
Barrier fluid outlet: 1/2" NPT(F)
Pressure guage connection: 3/8" NPT(F)
Filling connection: 1/2" NPT(F)
Nitrogen purging connection: 1/2" NPT(F)
Feed pump connection: 1/4" NPT(F)
Drain: 1/2" NPT(F)

Introduction:
Mechanical Seals generate heat and require lubrication while face sealing. Different API
Plans are used to dissipate this generated heat and cool the seal faces thus extending the seal life.
Flushing is required to cool and lubricate the seal. Controlling Flush Fluid Temperature is critical to the life of a mechanical seal. Cooling of the product also may be needed to improve the margin to vapour formation, to meet secondary sealing element temperature limits, to reduce coking or polymerizing, or to improve lubricity (as in hot water).

Disadvantage:
The basic disadvantages with water-based heat exchangers are the formation of scale around the tube due to fouling. Fouling can be very costly in refinery and petrochemical plants since it increases fuel usage, results in interrupted operation and production losses, and increases maintenance costs

Solution:
It has been often recommended to use the Air Cooler to get rid of the above problem but the size and the cooling efficiency of the so far developed air cooler had put them on the back foot and are rarely used for the cooling of the mechanical seals.
.
Expert Engineering has developed a new Enhanced Air Finned Cooler for such difficult applications, where no water is used. The compact size with natural draft cooling maintains the requirement of the cooling.

reactor seals( Housing seals)

Teflon bellow

Rubber bellow seals

Mechanical Seal, Special mechanical seal

Pop Up Valve Seal

Custom Made Rubber Product

Track Pad

ASMATH Seal (Trademarked) is a premium engine sealing solution, trusted across the industry for its durability and precision. Manufactured using only virgin raw materials and reinforced with metal outcasting for a perfect fit, our seals ensure reliable performance under demanding conditions.

Equipped with self-energized springs, ASMATH Seals are ideal for shaft engines, flywheels, crankshafts, camshafts, and other critical engine components.

If you're seeking a dependable alternative to frequent seal failures, ASMATH Seal is your go-to solution.

Quality is an integral part of LeakProofs business philosophy Our adherence to this business philosophy has been reflected in our position as a leader in the Indian Mechanical Seal market Remarkable success of our innovative products and solutions that operate efficiently even in the most severe duty conditions till date
We believe customers satisfaction and trust in any product or service is the key factor in success for any business And we are committed to bring satisfaction and trust in our products and services through quality Our commitment to quality is reflected in adherence to our Quality Policy
Our Quality Policy includes the vital elements for our commitment to excellence in products and services we offer
Nurturing a qualityoriented mindset with the objective of developing manufacturing and providing products and services with zero defects
Continuous improvement to the Quality Management System to guarantee product quality by preventing quality incidents and eliminating defects through the review of quality objectives and results
Encouraging participation and promotion of quality responsibilities amongst all employees and third parties through standards education training and coaching supervision and effective communication
Complying to relevant laws regulations and other requirements

11178087 Overhaul Seal Kit H1p089/100
Premium Danfoss 11178087 Hydraulic Seal Kit (for H1P089 & H1P100 Pumps)
The� Danfoss 11178087 Seal Kit is a comprehensive, factory-grade fluid power restoration solution engineered specifically for Danfoss H1-Series variable displacement axial piston pumps, specifically the H1P089 and H1P100 frames. This complete overhaul Hydraulic Pump Seal Kit is critically required by hydraulic equipment rebuild facilities, heavy machinery fleet maintenance managers, and regional fluid power parts distributors who demand zero-compromise sealing integrity under extreme system pressures.
Operating at modern system pressures up to 480 bar (6,960 psi), high-cycle hydrostatic transmissions rely on flawless sealing to prevent catastrophic volumetric efficiency loss, internal cross-port leakage, and environmental oil contamination. This heavy-duty sealing kit provides an exact-fit configuration to completely rebuild the pump's pressure boundaries, control valves, and shaft interfaces.
Critical Sealing Components Included
Every component in the 11178087 matrix is manufactured to strict geometric tolerances to survive the high dynamic stresses inside H1P pumps:
High-Pressure Shaft Seal� A reinforced, spring-loaded rotary lip seal engineered to handle variable housing case pressures without lip inversion or premature hardening.
Control Valve & EDC O-Rings: Micro-dimensioned seals designed for the Electrical Displacement Control (EDC) blocks, preventing control fluid bypass and maintaining precise swashplate positioning.
Housing Cradle & Interface Seals: Heavy-duty static sealing rings that lock the main pump segments together, eliminating external oil weeping and preventing environmental grit from migrating into the high-purity hydraulic fluid.
Anti-Extrusion PTFE Backup Rings:� Positioned adjacent to high-pressure O-rings to absorb mechanical clearance gaps under maximum load, preventing elastomer tearing or flattening.

11178088 Overhaul Seal Kit H1p115-130 Danfoss
Product Description
11178088 Overhaul Seal Kit H1p115-130 Danfoss
XingTai YiWei Mechanical Seal Technology Co., Ltd. is a specialized manufacturer of high-precision sealing solutions for the hydraulic industry. We produce comprehensive Repair Seal Kits for major brands like Rexroth, Danfoss, and Eaton. Our kits provide repair shops and manufacturers with a reliable, cost-effective solution to restore hydraulic equipment to peak performance, minimizing downtime and ensuring leak-free operation.

Product Description
Our hydraulic pump and motor repair kits contain a complete set of high-quality seals, O-rings, gaskets, and backup rings necessary for a thorough overhaul. Each kit is meticulously engineered to match the original equipment manufacturer's (OEM) specifications for dimensions, tolerances, and material performance. The components are manufactured from premium materials such as NBR, FKM, Polyurethane, and PTFE, selected for their excellent resistance to hydraulic oil, high pressure, heat, and wear.

Product Advantages
We design our kits to make repairs faster, more reliable, and more profitable for your business. Complete & All-In-One Solution: Each kit contains every essential seal and gasket required for a complete rebuild, saving you time and eliminating the hassle of sourcing individual parts.
 Premium Material Compatibility: All seals are made from industry-standard compounds (NBR for standard oil, FKM for high-temp/anti-wear fluids) to ensure compatibility with a wide range of hydraulic fluids and operating conditions.
Precision Engineering for Perfect Fit: Components are manufactured to exact OEM tolerances, guaranteeing a perfect fit and optimal performance, preventing premature failure and fluid leakage.
 Enhanced Durability & Performance: Our focus on material quality and precise manufacturing results in seals that offer extended service life, improving the longevity of the repaired unit.
Significant Cost Savings: Our kits provide a more economical alternative to OEM part kits without compromising on quality, offering excellent value and improving your repair margin.

Introducing the MB1-GAS, a specially designed non-contacting gas seal by Hydro-Serve Technologies, built to excel in cryogenic applications. With its innovative design and advanced technology, the MB1-GAS offers exceptional sealing performance even in extreme temperature conditions. Operating flawlessly in a temperature range of -140 degrees to 220 degrees Celsius, this seal is engineered to handle the demanding requirements of cryogenic environments.

The MB1-GAS is capable of withstanding pressures up to 30 bars, making it suitable for a wide range of high-pressure applications. Its robust construction and high-quality materials ensure durability and reliability even under challenging conditions. With a maximum speed capability of 42 m/s, this seal guarantees exceptional performance, meeting the demands of high-speed machinery commonly found in cryogenic processes.

Available in sizes ranging from 20mm to 100mm shaft diameter, the MB1-GAS can be tailored to fit various equipment specifications. Whether it's in the chemical, pharmaceutical, or energy industry, this gas seal provides an effective sealing solution, ensuring process integrity and minimizing the risk of gas leakage.

Experience the unmatched sealing capabilities of the MB1-GAS by Hydro-Serve Technologies, specifically engineered for cryogenic applications. Trust in its superior performance, temperature resistance, high-pressure capacity, and customizable sizes to meet your unique requirements. Ensure the efficiency and safety of your cryogenic processes with the reliable sealing solution provided by the MB1-GAS.

Introducing the MB1-GAS, a specially designed non-contacting gas seal by Hydro-Serve Technologies, built to excel in cryogenic applications. With its innovative design and advanced technology, the MB1-GAS offers exceptional sealing performance even in extreme temperature conditions. Operating flawlessly in a temperature range of -140 degrees to 220 degrees Celsius, this seal is engineered to handle the demanding requirements of cryogenic environments.

The MB1-GAS is capable of withstanding pressures up to 30 bars, making it suitable for a wide range of high-pressure applications. Its robust construction and high-quality materials ensure durability and reliability even under challenging conditions. With a maximum speed capability of 42 m/s, this seal guarantees exceptional performance, meeting the demands of high-speed machinery commonly found in cryogenic processes.

Available in sizes ranging from 20mm to 100mm shaft diameter, the MB1-GAS can be tailored to fit various equipment specifications. Whether it's in the chemical, pharmaceutical, or energy industry, this gas seal provides an effective sealing solution, ensuring process integrity and minimizing the risk of gas leakage.

Experience the unmatched sealing capabilities of the MB1-GAS by Hydro-Serve Technologies, specifically engineered for cryogenic applications. Trust in its superior performance, temperature resistance, high-pressure capacity, and customizable sizes to meet your unique requirements. Ensure the efficiency and safety of your cryogenic processes with the reliable sealing solution provided by the MB1-GAS.