Find Verified Metal Wire Suppliers, Manufacturers and Wholesalers

Drawn low carbon steel wires & Galvanized wires , steel specification are according to AISI 1010 standard & ASTM A820

This kind of wire is widely used for making handicrafts, woven wire mesh, forming fencing mesh, packing products and other daily uses.

HC Wires are used in various applications that require hardness and high tensile strength. These wires are available in high, medium, low carbon steel in sizes varying from 0.50 MM to 12.00 MM with carbon content from 36 to 85. These wires are available in various finishes such as annealed,

wires
phosphate coated and clean surface. These wires can be customized as per your requirement to get the hardness, tensile strength, torsion, coil weight and size tolerance as you require.
Technical specifications:

Diameter : 0.50 â?? 12.00 MM
Coil Wt. : 40 to 400 kg
Phosphate Coating
Finish : Black (Oil & Without Oil)
Packing : Coil with plastic wrapping

Standard materials are either galvanized or stainless steel.
Standard packages products are shown in the tables above, special specifications available on request.

Specifications:

Outside Diameter

No. of Loops

Standard Length per Coil

Type

Notes

450mm

33

8M

CBT-65

Single coil

500mm

41

10M

CBT-65

Single coil

700mm

41

10M

CBT-65

Single coil

960mm

53

13M

CBT-65

Single coil

500mm

102

16M

BTO-10.15.22

Cross type

600mm

86

14M

BTO-10.15.22

Cross type

700mm

72

12M

BTO-10.15.22

Cross type

800mm

64

10M

BTO-10.15.22

Cross type

960mm

52

9M

BTO-10.15.22

Cross type

Notes:
Standard products are shown in the tables above, special specifications available on request.
Standard materials are either galvanized or stainless steel.

* Material:
- Beryllium Copper/ Molybdenum/ Tungsten/ Nickel/ Cu-fe/ Chrome Copper/ Connector Wire, Etc
- Moq: From 100kg (Depending on Stock Situation)

DESCRIPTION :
These wires are High Carbon Annealed Bright drawn wires.

APPLICATION :
Used in manufacturing hand sewing needle and Hosiery needle.

SIZE RANGE :
Min. 0.76 MM,
Max. 2.00 MM

DESCRIPTION :
The wires are custom built to suit customers actual requirement. These wire are normally supplied as Annealed finish wires

APPLICATION :
Used in manufacturing of lock circlip used for locking shafts


Specification :
IS:EN 42C/42J

Nose wires for masks. 1 kg 10 usd and 1 kg = 340 meter

Bead Wire in Spools -Kiswire , New high-carbon steel wire used in tire manufacturing to reinforce the tireâ??s bead area

FOB Buffalo NY Rail Ramp

$180/MT

Tyre bead wire is a high quality carbon metal. It is incorporated in the structure of the tyre to withstand bumps, heat and other hazardous conditions. radial tyre bead wire is 1.6 mm and nylon tyre bead wire is 1.10mm. Therefor, the wire obtained from end of life tyres is also of high quality matieral and resuing it can be a highly lucrative for the businesses as well as the environment. Scrap Bead Wire is used in converting to shot blasting, high tension springs, wire mesh, wire baskets, nails, cutting tools. Since this is extracted from tyres it is available at a very reasonable rates.

A Scrap truck or Bus Tyre consists of 20-25% of high quality steel in it. The metal bead wire is obtained when the waste tyre is put into the shredding machines. It is very important to derive the bead wire in one single piece.

The wire can easily be oxidised so protecting it from different atmospheric agents is important. So to meet our clients' expectations, we have set strict standards and quality control techniques.
)

This steel has a high carbon content and is of good grade. It is built into the construction of the tyre to endure bumps, heat, and other potentially dangerous situations. As a result, recycled tyre wire is of very high quality and meets industry standards. To prevent machines farther down the processing line from usury, contemporary technologies tend to remove the wire as soon as possible. Pre-shredding is commonly followed by a first granulation step, in which the rubber chips are filtered through a 15 to 25 mm screener, depending on the plant layout. A magnetic mechanism separates the steel wire from the rubber immediately after this granulation. Along with the wires, 10 to 35 percent by weight of rubber and textiles are removed, hence the total material recovery varies depending on the contamination grade of the material (rubber/fiber). Steel typically makes up 10% to 20% of the weight of an old passenger car tyre. A typical shredding factory generates huge quantities of steel tyre wire, with quality varying depending on the technology, storage, and management systems used by the factories.
Another important component in assessing the material's quality is the steel's resistance to atmospheric agents. The material is quickly oxidised since it is shaped in tiny wires. As a result, protecting the wire from any atmospheric contaminants is an important part of improving its quality.

A highly efficient wire known for its high tensile strength, durability, cost effectiveness, rust and abrasion resistance, as well as being scratch-free, water and corrosion proof, with accurate dimensions. One of the best wires known for making

umbrella ribs, these wires require low maintenance and operating cost, and can be easily customized in different shapes and sizes. Used to design various types of ropes, spring and wire forms, and cables, these wires are available at very nominal prices.

Technical specifications:

Carbon Content - 0.35% To 0.40%
Sizes1.55 Mm To 2.20 MM
Oil Or Without Oil (As Per Preference)
Phosphate Coated

DESCRIPTION :
It is galvanised steel barbed wire with two strands of wire used for fencing.

APPLICATION :
Used in fencing
Type A : The wire have four points and formed by twesting two points wire, each two turns, tightly around both line wires.

Specification :
IS:278


SIZE RANGE :
All Sizes

Material :
The galvanised barbed wire is manufactured from galvaised mild steel wire confirming to IS : 280
Galvanizing :
The barbed wire is galvanised and the galvanizing requirements as laid down for medium coated wire of IS:4826 specification for galvanised coating on round wire.
Packing:
The coils are normally supplied in bare condition.

DESCRIPTION :
It is galvanized steel barbed wire with two strands of wire used for fencing.

APPLICATION :
Used in fencing
Type A: The wire has four points and is formed by twisting two points wire, each two turns, tightly around both line wires.

Specification :
IS:278

SIZE RANGE :
All Sizes

Material :
The galvanized barbed wire is manufactured from galvanized mild steel wire conforming to IS: 280
Galvanizing :
The barbed wire is galvanized and the galvanizing requirements as laid down for medium coated wire of IS:4826 specification for galvanized coating on the round wire.
Packing:
The coils are normally supplied in the bare condition.

This machine is to use rated size copper stripe to clad aluminum rod, after argon gas protecting welding, the raw wire can be drawing to small size from 10mm to 2.05mm, after eddy current flawmeter accepted, the wire can be drawed smaller to 0.12mm.
Output: 1.5 to 2.0ton per day.
Economical effect: the density of cca is about 37-40% of copper, its length is 2.45-2.65 times of copper in same weight and diameter.
The cca wire is widely used for coaxial cable or wire cable.

DESCRIPTION :
These wires are supplied in coils with Phosphated coating to facilitate cold heading operation.

APPLICATION :
Used in manufacturing Balls, Rollers, Taper rollers, Cylindrical rollers and needles etc. made out from EN31 / SAE 52100.

SPECIFICATIONS :
Grade EN31 / SAE 52100 (Carbon 0.98 â?? 1.10 % and Chromium 1.30 â?? 1.60%). Microstructure: Uniformly distributed fine carbide globules in ferrite matrix i.e. Spherodized annealed.
All properties like Hardness, Tensile strength, Size tolerance, coil weight etc. are maintained as per customerâ??s specification.

PACKING :
The finished drawn wires are dipped in rust preventive oil, securely bound at four places and wrapped with Polethene & Hessian/ HDPE.
We specialize in supplying Bearing wires to customerâ??s actual needs.

Specification :
IS:EN 31/SAE 52100
SIZE RANGE :
Min. 1.60 MM,
Max. 9.50 MM