We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
TDF: Shredded tyres of size 5cm*5cm for the use as an alternative fuel in cement kilns.
Fine TDF: Tyre chips of size 2cm * 2cm and below with vast majority of steel removed.
This product is an extremely high quality alternative fuel with very high calorific value.
Pure rubber granules of size 1-3 mm with no steel or textile.
This product is used in many applications mainly as artificial turf infill and anti-shock floorings.
Dimensions:
- Width*Length: 20cm * 12m
- Thickness: 1 cm
Description:
- To prevent flow of water past a closed gate, seals are provided either on the gate or on
the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic,
deforms readily and regains its original shape on removal of load.
Material:
- EPDM.
- Screwed + held by steel sandwich
Dimensions:
Width*Length: 15cm * 13m
: 2.5cm * 13m
- Thickness: 1 cm
Description:
To prevent flow of water past a closed gate, seals are provided either on the gate or on
the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic,
deforms readily and regains its original shape on removal of load.
Material:
- EPDM.
- Screwed + held by steel sandwich.
Dimensions:
- Width*Length: 11cm * 3.2m
: 8cm * 3.2m
- Thickness: 2cm
Description:
To prevent low of water past a closed gate, seals are provided either on the gate or on the
metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic,
deforms readily and regains its original shape on removal of load.
Material:
- EPDM.
- Screwed + held by steel sandwich.
Size:
- Length*Width: 150*150 cm.
- Thickness: 12mm
Advantage of this Tille:
- Excellent slip resistance, water resistance,
- Resistance to heavy impact loads, sound absorbent.
Indoor flooring:
- Does not react to weather conditions.
- It has no negative effect on children if directly touched according to our customer feedbacks.
- Endurance is more than 2 tons per square meter.
Color: Black.
Applications:
- It is used in sport halls and locations that need Shock absorbers and safety flooring.
- It is used in kidsâ?? areas and schools.
Dimensions:
450*350 mm
- Thickness: 20mm And many different sizes according to customer requirements
Purpose:
Anti-Vibration Pads are a simple yet effective solution to absorb vibration, and impact and reduce noise from various types of machinery. Using an Anti-Vibration Pad correctly can often be the most cost-effective way to address a high-frequency vibration
Material: Mix from SBR and Natural Rubber
Dimensions:
- MC001AVM: Dia: 44* Height: 41 mm
- MC002AVM: Dia: 44* Height: 44 mm (with steel base thickness 3mm & Dia. 50mm)
Features:
Easy-to-install Universal Mounts
- Provide fail-safe, all-attitude isolation for vehicle cabs, engines, transmissions and other equipment.
- Designed for shock load damping.
- It withstands up to 50 kg per piece and must be installed on a circular fitting base.
Physical Specification:
- Hardness (Shore A): 40 - 80
- Tensile Strength (MPa): 4 min.
- Elongation at break (%): 280 min.
Color: Standard: Black
Applications:
- Anti-vibration Rubber.
- Noise Absorption Rubber.
- Engine, Generator, Motor, Compressor, etc
- Manufactured from durable EPDM rubber.
- High UV & Ozone resistant
- Fast & easy installation.
- Maintenance Free
- Provides a permanent seal for any type of construction
- Allows exerting a continuous and uniform force against the joint walls.
Applications:
- Bridges
- Parapets
- Cark parks
- Buildings
- Tunnels
- Water treatment plants.
Dimensions:
- Width*Length: 36cm * 107cm
- Height: 5 cm
Purpose:
- Rubber bridge expansion joints are mainly made of rubber, steel plate and angle iron.
Steel plates are set in the rubber bridge expansion to strengthen the bearing capacity and they can
slide freely along the angle iron to meet the expansion deformation of main grid.
- Because of the excellent sealability and shock-absorbing effect of rubber, rubber bridge expansion
joints do well in proofing water and reducing noise. The elasticity of rubber plates and its shear
deformation in the telescopic channel helps the whole device to realize telescopic motion.
Features :
- Rubber bridge expansion joints are made of prime-quality rubber, have anti-aging and
have a long service life.
- Wear resistance, corrosion resistance.
- Rubber bridge expansion joints can withstand the weight of vehicles and pedestrians.
- During installation, bolt holes on the bottom and each junction are filled with adhesion
agent which makes the whole rubber bridge expansion joints be highly water-resistant.
- Rubber bridge expansion joints can ensure vehicles runs smoothly and no noise.
Material: Rubber & Steel Plates.
Applications:
- Rubber bridge expansion joint is used in expressway.
- Rubber Bridge expansion installed in the end of bridge.
- Rubber bridge expansion joint is used flyover.
- Rubber bridge expansion joint is used in connection of bridge
Super fine reclaimed rubber sheets. Rubber recovered from vulcanized scrap rubber (as by grinding old tires and treating with oils and special chemicals), often mixed with crude rubber for compounding, and used chiefly in mechanical rubber goods. We use additives that is approved by REACH standards.
Dimensions:
Width: Up to 1500mm
- Length: up to 20,000mm according to thicknesses
- Thickness: 3mm - 25mm according to use and applications.
Description:
Anti-Abrasion Rubber Lining Sheet is a blended natural and synthetic rubber sheet
offering tear and impact resistance & high elasticity. It has excellent resistance to large particle impact and abrasion.
Material : Natural Rubber and Synthetic Rubber
Physical Specification :
- Hardness (Shore A): 5 + 50
- Tensile (MPa): 3.5 min.
- Elongation at break: %300
- Abrasion max: 150mm3
- Temperature Range: 20-c to 70+c.
Color: Standard Black
Optional (Beige, Grey).
Applications:
1. Shot blasting rooms.
2. Parking areas.
3. Wall lining for workshops and factories.
Natural West African Rubber Lumps: Sourced from the abundant rubber plantations of West Africa, these raw rubber lumps are prized for their purity and elasticity, ideal for diverse industrial applications.
High-Quality Raw Rubber: Harvested directly from West African rubber trees, our raw rubber lumps offer superior durability and flexibility, making them a preferred choice for manufacturing.
West African Rubber Lumps: These unprocessed rubber lumps are known for their consistency and high natural latex content, ensuring optimal performance in various rubber products
