Liquidation of inventory
Cheap material
Quantity: 10000
Date:
Welcome wholesale, trade, retail, personal use of friends contact.
It is cheap and good to clear stock. The order is large. The need for quick contact.
Welcome wholesale, trade, retail, personal use of friends contact.
The S6022 flow switch use a variety of paddle sizes to respond to fluid flow rates in applications with pipe size greater than 1 inch trade size.
These paddle-type flow switches are designed for pipe fluid flow indication. Suitable fluids include water, ethylene glycol solutions and fluid not harmful to brass or phosphor bronze or classified as hazardous fluid.
A 3-piece stainless steel paddle kit is included allowing effective installation in variety of pipe size and fluid flow conditions.
Single-pole, Double-throw (SPDT) open-low versions of these flow switches are available
Micro Switch action is PUSH-ON TYPE S.P.D.T
Contact resistance measurements shall be made with a 1KHz ± 200Hz max
DC 5V 1A contact resistance meter.
Insulation resistance measurements shall be made following application of DC 500 V potential across terminals and across terminals and frame for one minute.
The travel distance for the plunger to come to a stop shall be measured
Snap-in type, can be mounted directly on PC board.
Some of output terminals can be also used as jumper leads, thus making circuit arrangement easy.
Available with anti-ESD ground terminal.
Although the recommended PC board thickness is 1.6mm, the models which can be mounted on PC boards of thickness 0.8 to 1mm are also available upon request.
Snap-in type, can be mounted directly on PC board.
Some of output terminals can be also used as jumper leads, thus making circuit arrangement easy.
Available with anti-ESD ground terminal.
Although the recommended PC board thickness is 1.6mm, the models which can be mounted on PC boards of thickness 0.8 to 1mm are also available upon request.
Snap-in type, can be mounted directly on PC board.
Some of output terminals can be also used as jumper leads, thus making circuit arrangement easy.
Available with anti-ESD ground terminal.
Although the recommended PC board thickness is 1.6mm, the models which can be mounted on PC boards of thickness 0.8 to 1mm are also available upon request.
Being a patron focused organization, we are engaged in manufacturing and supplying best grade Level Switch. We manufacture a qualitative range of water meter that is manufactured using premium grades of raw material. It consists of inferential, multi jet, dry type water meter with magnetic drive and vacuum sealed register.
Cable Type Balloon Level Switch
We specialize in providing a range of Cable Type Balloon Level Switch that is appreciated for their optimum quality, durability and easy installation. Being the leaders in the industry, we present Cable Float Level Switches to our clients. They require minimum maintenance and are presented at the best rates in the industry.
Applications:
An Economical, Viable alternative for control in liquid levels
Simple, Rugged & Reliable
Range: up to 5 mtr.
Switch rating: 10-14 AMP@ 230 VAC
Material of Construction PVC suitable for most liquids
Housing: Weatherproof to IP 66/68/ Flameproof - On request
Details Required for Quotation:
Tank height
No of contacts
Level Gauge
We are an ISO 9001:2008 certified company involved in manufacturing, supply and exporter of Level Gauges in India. These are manufactured from state of the art technology and is in high demand from our valued buyers. Uses:
Water Level Gauge
Tank Level Gauge
Oil Level Gauge
Liquid Level Gauges
Thyristor Switches
Thyristor switch mainly contains components as follows: Trigger circuit, thyristor, diode and ancillary circuit. Trigger circuit will judge whether it will output the control signal (DC12V) or not when voltage before and after zero crossing switching, so as to turn on or off. The trigger circuit can reliably ensure the output of the control signal. Radiator is mainly used for conducting heat and cooling through installed a switch which contains over-temperature protection and cooling fan controller, so as to provide the operation with a safe and good condition. Compared to other thyristor switch, this one has these advantages: no rush current, no touching noises; which is more suitable for those switching frequently occasions, such as lifts, cranes and welding machines.
Application
Tongdian Thyristor switch is in three-phase systems used to switch capacitors, and other switching device compared to the, the switch has no inrush current during switching, without exposure to noise and high switching frequency. These advantages are achieved by triggering circuits, thyristor, diode, and some auxiliary circuits. The switch is suitable for the occasion which changes the load quickly.
Tact Switch MT 1101 S is applied to low current circuit tactile switch for electronic equipment.The standard test conditions shall be 5 ~ 35 degree Celsius in temperature.
45 ~ 85% RH and 860 ~ 1060 m bar in atmospheric pressure.
Should any doubt arise in judgement, tests shall be conducted at 20±2 degree Celsius, 60±5% RH
Product description:
Using phosphorus and nitrogen as flame retardant elements, the flame retardant performance reaches UL94-V0, and has passed the GWIT 775 and GWFI 960 glow wire tests, meeting the requirements of ROHS, SVHC and PAHS regulations.
product features:
1. High flame retardant efficiency, low smoke emission, good dimensional stability and high temperature resistance
2. Glass fiber reinforced flame retardant polypropylene has good mechanical properties, low warpage and high rigidity.
3. Excellent UV resistance and heat aging resistance, can be used for outdoor products
Product use: heater, switch panel, electronic control housing, coil frame, battery
Why Sell Your Used Motors and Parts to Us?
Top Market Rates: As the best motor scrap dealers, we provide competitive prices for a used electric motor recycling machine and its parts for sale based on current market trends and material quality. Whether you're selling a single motor or bulk quantities, we ensure maximum returns.
Hassle-Free Collection: Disposing of heavy and bulky items like motors and parts is easy with our reliable pickup service. Covering all areas across the UAE, we handle all logistics, making us the preferred choice for those seeking machinery scrap dealers or looking to sell motor scrap.
Eco-Friendly Recycling: Recycling used motors and parts reduces waste and minimizes the demand for new raw materials, conserving resources and lowering environmental impact. By working with trusted scrap buyers in Dubai, you contribute to sustainable recycling while earning money for your scrap.
204692 Electronic Switches Suppliers
Short on time? Let Electronic Switches sellers contact you.
