Find Verified Acetone Suppliers, Manufacturers and Wholesalers

Appearance: colorless transparent liquid
Assay: fª99.5%
Moisture: f_0.1%
Acidity(as acetic acid ): f_0.15%
Residue on evaporation : f_0.002%


200kg in plastic drum, or following your demand

Our company adopts new technology invented first in the world by ourselves to produce Chlorinated Paraffin -70 Pct that not using carbon tetrachloride as a solvent, It avoids disturbing carbon tetrachloride to the air ozone layer and reach to the demand ofMontreal's Agreement¡·and protect our environment which we living. By adopting new technology, the heat -stability of the products is distinct improvement. The quality of products is improved. The quality of products is improved evidently.
Not only adding the variety, then importantly the consumers are satisfied and enlarging the market owning rate. Our company¡¯s chlorinated paraffin-70 pct is well received by consumers.
1. Instruction on products Commodity name is chlorinated paraffin70 or alkyl chloride70.The appearance shows in white or light yellow powder. The general molecular formulation is C25H30CL22, and the mean molecular weight is at range of 1,060¡«1,100, density of at range of 1.61.7.This product performs good stability of chemical property. It can¡¯t dissolve into water or sub-degree alcohol but in mineral oil, aromatics, alkyl chloride, ether, acetone, and ester; and endures the action of oxidant, also has the property of waterproof and anti-up. It begins to degenerate somewhat at or over temperature of 170 DEG. with degeneration of hydrogen chloride and forms into heavy alkyl substances.





25kg packaged into pp woven bag inner lined with a ply of plastic film. Bag sowed by sewing machine.

Common name: Oxyfluorfen

Chemical name: 2-Chrolo-|¨¢,|¨¢,|¨¢-trifluoro-p-totyl-3-ethoxy-4-nitrophenyl ethyl

Molecular formula: C15H11CIF3NO4

Molecular Weight: 361.7.

Physical chemistry: Form slight yellow powder, S.g./density 1.35(73), M.p.85-90; (tech,.65-84) V.p.(pure a.i)0.0267 mPa(25). Solubility In water 0.116mg/l(25). Readily soluble in most organi solvents,e.g.acetone 72.5,cyclohexanone,isophorone 61.5,dimethylformamide>50,chloroform 50-55,mesityl oxide 40-50(all in g/100g,25), Decomposed rapidly by u.v.Irradiation.

Use: Control of annual broad-leaved weeds and grasses in a variety of tropical and subtropical crops,by pre- or post-emergence application at rates in the range0.25-2.0kg a.i./ha.Particular crops include tree fruit(including citrus), vines, nuts, cereals, maize, soya beans, peanuts, rice,cotton,bananas,peppermint,onions,garlic,ornamental trees and shrubs,and conifer seedbeds.When it is used in the field of fruit it can be mixed with Glyphosate to strengthen the efficiency.

24% EC 200L/ Iron drum, 97%TECH: 25Kg/Fiber drum.

Acetylacetone

Appearance: colorless transparent liquid
Assay: fª99.5%
Moisture: f_0.1%
Acidity(as acetic acid ): f_0.15%
Residue on evaporation : f_0.002%
Packing: 200kg in plastic drum, or following your demand


Packing: 200kg in plastic drum, or following your demand

Name: Glycine, aminoacetic acid, gly, glycocoll
[Molecular formula]:C2H5NO2
[Molecular weight]:75.07
[Structure formula]:NH2CH2COOH
[Assay]: 98.5%--101.5%
[CAS]:56-40-6
[Physical-chemistry property]:
White crystal powder,sweet taste,easy to be dissolved in water, slightly dissolved in methanol and ethanol, but not dissolved in acetone and ether,melting point:between 232-236(decomposition).
Quality specification:
Tech-grade adopts the enterprise standard of Donghua General Company HG/T2029-2004(The chemi-cal industry standard was also made by our company);
Fodder grade adopts out enterprise standard Q/08JDH18-2006;
Food grade adopts the standard of japan food additive Manual 8th edition;
Pharma-grade adopts the standard of American Pharmacopeisa.



[Packing]: Net weight 25KG/Bag; ( paper bag/paper box/paper barrel).
[Original produce place]: Hebei ,China

Common name: Oxyfluorfen

Chemical name: 2-Chrolo-trifluoro-p-totyl-3-ethoxy-4-nitrophenyl ethyl

Molecular formula: C15H11CIF3NO4

Molecular Weight: 361.7

Physical chemistry: Form slight yellow powder, S.g./density 1.35(73¡æ), M.p.85-90¡æ; (tech,.65-84¡æ) V.p.(pure a.i)0.0267 mPa(25¡æ). Solubility In water 0.116mg/l(25¡æ). Readily soluble in most organi solvents,e.g.acetone 72.5,cyclohexanone,isophorone 61.5,dimethylformamide>50,chloroform 50-55,mesityl oxide 40-50(all in g/100g,25¡æ), Decomposed rapidly by u.v.Irradiation.Control of annual

used on broad-leaved weeds and grasses in a variety of tropical and subtropical crops,by pre- or post-emergence application at rates in the range0.25-2.0kg a.i./ha.Particular crops include tree fruit(including citrus), vines, nuts, cereals, maize, soya beans, peanuts, rice,cotton,bananas,peppermint,onions,garlic,ornamental trees and shrubs,and conifer seedbeds.When it is used in the field of fruit it can be mixed with Glyphosate to strengthen the efficiency

25kg/fiber drum.

Chemical Name: 2-Mercaptobenzimidazole
Specification:

Item Powder Oiled powder
Appearance White powder
Initial M.P. �¿C â?¥ 290.0 290.0
Loss on drying % â?¤ 0.30 0.40
Ash % â?¤ 0.30 0.40
Residues on 150�¼m sieve, % â?¤ 0.10 0.10
Additive, % \ 1.0-2.0
Properties:
White powder. No smell but taste bitter. The density is 1.42. Soluble in alcohol, acetone and ethyl acetate, Slightly soluble in petroleum ether, CH2CL2, Insoluble in CCL4, benzene and water. Good stabilization stroge ability. As second anti-degradant without poison.
Application:
A non-staining secondary antioxidant for natural rubber, CR, SBR, NBR and EPR, etc. Especially effective against heat oxidation in combination with amine.
Packaging:
25kg; plastic woven bag, paper with plastic film bag, kraft paper bag.
Storage:
Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 2 years when stored under normal conditions.

Chemical Name: Tetraethyl thiuram disulfide
Specification:

Item Crystal Oiled crystal Granule
Appearance Light yellow crystal(granule)
Initial M.P. �¿C â?¥ 66.0 66.0 66.0
Loss on drying % â?¤ 0.30 0.40 0.30
Ash % â?¤ 0.30 0.40 0.40
Residues on 840�¼m sieve, % â?¤ 0.00 0.00 --
Additive, % -- 1.0-2.0 --
Granule Diameter, mm -- -- 2.50
Properties:
Light yellow crystal(granule). Odorless. Specific gravity: 1.27--1.30. Soluble in benzene, toluene, carbon disulphide, acetone and chloroform; Insoluble in water, dilute acid and alkali, partly soluble in gasoline and alcohol. Sensitive to skin and mucosa. Have certain toxicity, good storage stability.
Application:
A primary accelerator and curing agent for NR, SBR, nitrile and EPDM. The efficiency sulphur content is 11%. Closely resembles Accelerator TMTD in its applications. Have high catalytic action to acids and guanidine type accelerator. Less scorch and blooming, good processing safety. Can be used in CR as an anti-scorching agent and as raw material for germicide, pesticide and medicine.
Packaging:
25kg plastic woven bag, paper wilh plastic film bag, kraft paper bag
Storage:
The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The product with pallet should not be stacked. Stacking of palletized material or temperature of above 35â?? can cause unusual compacted product.The validity is 2 years.

Chemical name: 2,2,4-trimethyl-1,2-dihydroquinoline content
Specification:

Item Specification
Appearance Amber to browns flake or granular
Initial M.P. (Min) â?? 80-100
Loss on drying (Max) % 0.30
Ash (Max) % 0.30
Properties:
This product in brown piece of amber, poisonless, Soluble in benzene, chloroform, carbon disulfide and acetone, but not soluble in water. Itâ?²s toxicity is light, pollution is low, fine solution with rubber. This product is combustible, when storing and transporting, always pay attention to fireproof and dampproof.
Application:
The product is particular excellent kinds of general-purpose ammonia anti-ageing agent. It particular suit to full-steel, semi-steel radial ply tire and it apply to many kinds of the tires, rubber tube, gummed tape, rubber overshoes and general industrial rubber products and also suits to emulsion products.
Package
25kg paper bag in lined with plastic bag. It should be stored in a cool well-ventilated area.
Storage:
Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 2 years when stored under normal conditions.

Chemical Name: 2-Mercaptomethylbenzimidazole
Specification:

Item Powder Oiled powder
Appearance(eye measurement) Light yellow or off-white crystalline powder
Incipient melting point oC â?¥ 250.0 â?¥ 250.0
Heating loss % â?¤0.40 â?¤0.40
Ash content % â?¤0.40 â?¤0.40
Residue on sieve( 150�¼m),% â?¤ 0.0 â?¤ 0.0
Additive,% -- 1.0-2.0
Properties:
Gray-white powder. No amell but taste bitter. The density is 1.33. Soluble in alcohol, acetone, ethyl acetate, slightly soluble in petroleu, ether, CH2CL2, insoluble in CCL4, benzene and water. Good atabilization storge ability. As second anti-degradant without poison.
Application:
This product can be used for natural and synthetic rubbers. As it is secondary antioxidant, ever better effects can be developed when used together with other antioxidants. Furthermore, when it is employed in casw of sulfurless vulcanization higher heat resistance can be obtained, it also severs as an accelerator of CR and heat sensitizing agent for latices. It is effective not only white and light colored articles, but also for rubber products of all types. But unsuitablefor food processing.
Packaging:
25kg; plastic woven bag, paper with plastic film bag, kraft paper bag .
Storage:
Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 2 year when stored under normal conditions .

Chemical Name: N-Oxydienthylene-2-benzothiazole sulfenamide
Specification:

Item Granule
Appearance Light yellow or orange granule
Initial M.P. �¿C â?¥ 80.0
Loss on drying % â?¤ 0.30
Ash % â?¤ 0.30
Insoluble In methanol,%max 0.50
Free amine,%max 0.50
Properties:
Light yellow or orange crystal(granule). No posion with a little odor of ammoni. The density is 1.34--1.40. Soluble in benzene, acetone, chloroform, insoluble in water acid and alkali with lower concentration.
Application:
An excellent delayed accelerator. The performance is similar as Accelerator CZ with better scorch safety. Widely used in NR, IR, SBR, NBR and EPDM. Can be used alone or with those vulcanization Accelerators such as thiurams, guanidines and dithiocarbamates to improve the activity. Mainly used in manufacture of tires, shoes and belts. Non-blooming. Not Suitahle appying in beverage and food containers because of the bitterness of the product after vulcanization.
Packaging:
25kg plastic woven bag, paper wilh plastic film bag, kraft paper bag.
Storage:
Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is one year when stored under normal conditions.

Adipic acidProperties
Adipic acid, commonly known as fatty acid, is also called hexane dicarboxylic acid, molecular formula for C6H10O4, molecular weight is 146.14.Ar room temperature it is monoclinic crystal.Melting point 152 �¢??, boiling point 337.5 �¢??, the relative density is 1.366. It is soluble in ethanol, ethyl ether, acetone, etc., product of adipic acid is white, odorless, crystalline solid.It has good stability in air, it is slightly soluble in water, easy soluble in alcohol, ether and most organic solvents, it has connectivity of aliphatic dibasic acid, including salt reaction, esterification and amidation reaction, etc., it can be condensed into a polymer with diamine.
Applications:Adipic acid can be carried on condensation reaction with polyfunctional compounds, such as adipic amine. In industry, using adipic acid with hexamethylenediamine soho reaction produce nylon 66 salt (AH salt for short), by further polycondensation of nylon 66 salt, can get nylon 66 resin. In addition, reacting with alcohols, adipic acid can produce adipate, used as plasticizer, synthetic lubricant and polyester polyols and other products, can be used for all kinds of food and drink sour agent. Due to no n-deliquescence, adipic acid is especially suitable for dry food, can be stored for a long time.

Radiation crosslinking agent TAICChemical name:  Triallyl isocyanurateCAS No: 1025-15-6Density:1.11Melting point: 24-28°CVapor pressure: 3mmHg at 114°CSpecific gravity: 1.15 at 30°CBoiling point: 119-120°C (144°C at 3mmHg)Refractive Index(n30D): 1.5070~1.5100Flash Point: 245°C by Pensky-Martens MethodSolubility: not dissolves in water, slightly dissolved in alkane, and completely dissolves in aromatic hydrocarbon, alcohol, acetone, hydrocarbon halides and cyclopentane hydrocarbon, etc..Toxicity:LD50=660mg/kg(laboratory tested) All the homopolymers, copolymers and ethylene series of TAIC are non-poisonous. TAIC is widely used as a coagent for peroxide crosslinking or radiation crosslinking of Chlorinated Polyethylene (CPE), EPDM, Fluroelaster and so on.TAIC is availavle for linking by x-ray, y-ray electron or ultra violet ray radiation and the product polyolefines have the superior insolubility to solvents and the tensile strength at high temperature could be improved.TAIC is effective modifier to heat resistance with increasing of crosslinking density for peroxide crosslinking denisty for peroxide crosslinking of CPE. Since TAIC acts as an acceptor of HCI which is envolved from CPE at crosslinking reaction and deteriorates its physical properties.TAIC is the most effective coagent for crosslinking EVA.TAIC preferably contributes to promote crosslinking rate and also to improve its heat resistance, compression set and abrasion resistance

Chemical name : bis(2, 2, 6, 6-tetramethyl-4-piperidyl) sebacate

Molecular formula : c28h52o4n2

Molecular weight : 480.74

Cas no : 52829-07-9

Physical and chemical properties :

Appearance and behavior : white crystalline power or granules , odorless

Melting/freezing temperature : 80~86¡æ

Transmittance : 425nm¡ý98.0% ; 500nm¡ý99.0%

Solubility (g/100g solvent , 20¡æ)

Solvent
Acetone
Ethyl acetate
Benzene
Water

Solubility
19
24
46
<0.01




Introduction :

Ys 770 is a low molecular weight hindered amine light stabilizer(hals) that provides excellent light stability for thick sections¡¢films and tapes in the recommended substrates , particularly in pp thick sections. It has broad compatibility and can be easily dispersed.

Compared to conventional uv-absorbers , the effectiveness of ys 770 is less depend on the polymer¡¯s thickness. For this reason , the use of ys 770 also provides good light stability in materials with high specific surface, e.G. Films and tapes.

Combined with other hals, ys 770 could perform better effectiveness, e.G. Ys 791

Applications :

Ys 770 is recommended to be used in polypropylene , impact modified pp(tpo) , epdm , polystyrene , impact polystyrene , abs , san , asa and polyurethanes and is also effective in polyamides and polyacetal.

Guidelines for use :

The recommended concentrations range between 0.1% and 0.5% , depending on the substrate , processing conditions and application. Ys 770 has low toxicity. In japan ¡¢canada ¡¢america etc , ys 770 could be used in polyolefin plastic which contacts food directly. The maximum concentration is 0.5% in japan and america and is 0.35%



25kg/carton, 500kg/pallet

Molecular formula: nh4cl

N.W. : 53.49

Appearance: colorless crystal or white crystal powder

Properties: it dissolves in water easily, in glycerin and little solve in alcohol, not solve in acetone and aether.

Specification:

Item
Fao/who
Enterprise standard
Ammonium chloride(nh4cl) % =
99.0-101.1
99.60
Loss on drying % =
0.5
0.3
Residue on ignition%=
0.1
0.1
Fe %=
----
0.0005
Plumbum (pb)%=
----
0.0003
As % =
----
0.0005
Ph
4-5.8
4.9
Slufate (so4 ) %=
----
0.01
Calcium(ca) % =
----
0.0005
Application:it is used to provide protein to cattle and sheep.
Packing: 25kg woven bag or 25kg paper drum

Translucent white flaky solid, caustic soda is a basic chemical raw material, widely used in papermaking, synthetic detergent and soap, viscose fiber, rayon and cotton textiles and other light and textile industry, pesticides, dyes, rubber and chemical industry, petroleum drilling, refining petroleum grease and tar oil refining industry and the defense industry, machinery industry, wood processing, metallurgical industry, pharmaceutical industry and urban construction and other aspects. Also used in the manufacture of chemicals, paper, soap and detergent, artificial silk and cellophane, processing bauxite alumina, aluminum is also used at the silk textile, water treatment and so on.

Property:
Commercially available solid and liquid caustic soda has two types: pure solid caustic soda were white, block mounted, sheet, rod, granular, crisp; pure liquid caustic soda is colorless and transparent liquid. It has a strong hygroscopic solid caustic soda. Soluble in water, dissolved when the heat, alkaline aqueous solution, a greasy feel; soluble in ethanol and glycerol; insoluble in acetone, ether. Corrosive, fiber, skin, glass, ceramics and other corrosive effect. Aluminum and zinc reaction, and nonmetal boron and silicon emit hydrogen; disproportionation reaction with chlorine, bromine, iodine and other halogen; and salt and water and acids and the role played.

When you save to pay attention to the seal of solid sodium hydroxide, to prevent exposure to moisture absorption and deliquescence or carbon dioxide in the air. When in full bloom with caustic soda bottles or other forms of sodium hydroxide, a glass stopper is not available, it should be replaced with a stopper, because sodium hydroxide will work with silica glass produced by the reaction of sodium silicate and lead stopper bottle bonding difficult to open.
Basic characteristics:
Extremely corrosive, its solution or dust spilled on the skin, especially splashed mucous membranes, can produce soft crust, and can penetrate deep tissue.You must wear overalls, masks, protective glasses, rubber gloves, rubber apron, gumboots and other protective clothing when working operator. It should be painted in neutral and hydrophobic ointment on the skin. Production workshop should be well ventilated

Product Introduction
DPG without odour and poison. Density:1.13-1..19g/m.Easily soluble in acetone ethyl acetate; Soluble in benzene, ethanol; Slightly soluble in ; Insoluble in water and gasoline
Application
Generally used for natural and synthetic rubbers. Mainly used in manufacture of tires, slab rubber, rubber shoes and other technical rubber products.
Packing:
In knitted bag lined with plastic bag or Kraft paper bag.2.5kgs/bag or at buyers' request.

CAS NO:29547-00-0
Formulations:C5H14NO7S4Na
Melting Point:142 - 143¡ãC
Molecular weight::333.4
Appearance:white needle crystal (tech., shapeless granularof solid or white to yellowish powder)
Solubility:Easily soluble in water, the solubility in water is 1.335g/mL at 20oC; easily soluble in technical alcohol and hot waterless ethanol. Slightly soluble in methanol,
dimethylformamide, dimethyl sulfoxide; Insoluble in acetone, ether, chloroform, ethyl acetate, benzene and other organic solvents.
Stability : Stable at normal temperatures and at pH 5 -9, easily absorbs moisture, degraded by iron, easily decomposedin strong acids or strong alkalis.


18g/200bags.25kg/bags.25kg/drum,45kg/druml.150kg/drum.Package way can be customized

Characterwhite or pale yellow crystals, soluble in acetone, benzene, toluene, ether and ethyl acetate, and warm carbon tetrachloride, ethanol and heptane. It is slightly soluble in gasoline and insoluble in kerosene and water.

Applicationthis product can be used in natural rubber and synthetic rubber. It can effectively prevent the burning of rubber compound in the process of processing, thus making it possible for calender and extruder to operate at high temperature and high speed, improving the production capacity of vulcanizer, improving the storage stability of rubber compound, preventing natural vulcanization during storage, and for rubber which has already undergone high heat or has the risk of scorching.The material has regeneration effect.

> Material: 100% polypropylene.
> Standard color : Grey(Customizable).
> Function: Absorb oil,refrigerant,water any liquid, such as:gasoline,hydraulic oil,vegetable oil, antifreezing solution,acetone,xyleneâ?¦ect.
> Suitable: It will absorb any liquid.
> Burning after using,ashâ?¤0.02%.



*Characteristic : Dimpled only / dimlpled&laminated with spunbond fabic,wearproof and coriaceous.
*Suitable : Workshop,chemical plant,laboratory..ect any liquid spill areas and scrub any fluid.
*Packing : PE bag/PE bag & carton