Please click here to check who's online and chat with them.

Api 16C Flexible Choke Kill Line

Supplier From China
Jun-14-19

Recommended For:

Flexible hose between the riser and manifold or around the ball joint of offshore drilling rigs, specially designed to withstand high pressure.



Tube:

Modified Nitrile. Black. Resists abrasion, corrosion, oil, and up to 20% H2S.



Reinforcement:

Multiple layers of textile fabric and steel cable, with one layer middle rubber placed between cable layers.



Cover:

Fire resistant rubber cover, stainless steel armored to handle abrasion, corrosion, cutting, gouging, oil and weather.



Couplings:

Swaged couplings. Full range of couplings are available, such as hammer unions, flanges, camlock, male thread, etc.



Temperature:

-4 to +200 (-20 to +93) continuous service.


Options:

Accessories such as safety clamps and hose lift eyes are available upon request.



Test:

Each hose is tested at 22500psi for 15 minutes. Pressure test graph, test certificate and letter of conformance are issued for each hose.

Price and Minimum Quantity

Price: $700.00 - $9000.00
MOQ: Not Specified

Recent User Reviews

This user has not received any reviews yet!

Verification Status


 
 
Contact Supplier
Renew

More Items Similiar to: Api 16C Flexible Choke Kill Line

May-11-21
 
API Spec 16C Flexible line connection in the choke manifold and kill manifold system.

TEMPERATURE: -20~+121 (Grade B+U)

TUBE:Nitrile rubber, resistant to oil, abrasion, acid & alkali.

REINFORCEMENT:2-8 layers of single high strength steel wire spiral.

COVER:Neoprene, resistant to oil, abrasion and low temperature, weather proof and anti-aging.

ARMORE: Stainless steel armore.

CONNECTION:Welded or integral union, flange or clamp connection form. Special type can be available upon customers' request.

OPTIONAL:Accessories such as safety chain or clamp and hose lift eye & collar clamp are available.

How to contact with us:
GOLD Member
Sep-17-20
 
GOOD GRADE OCC WASTE PAPER SCRAP MADE IN USA GRADE 11 AND 12
Place of Origin : JAPAN, US, EUROPE
Materials : Waste Paper
Type : OCC, ONP, OMG, YELLOW PAGES, A3, A4 WASTE PAPER
Color : Mixed & NOT MIXED
Unit : Ton/Tons
Minimum Order : 20 Tons
Payment Term : T/T 50/50 and L/C 100% at sight
Shipping Lines : Ocean shipping
Estimate Lead Time : 15 - 20 days
Shipping Origin : Tokyo, Yokohama, Hamburg, New York, Long Beach
Supplying Capacity : 200 tons/month
Packaging : Bale (1.2-1.4 Tons/Bale), 20-25 Tons loading 40FT container
GOLD Member
Nov-08-23

Sericite (Pottery Stone)

$150
MOQ: 20  Tons (US)
Sample Available
Supplier From Ho Chi Minh, Viet Nam
 
The pottery stone ore shown in the earlier photograph is a particularly high-quality special-grade material among our pottery stones. Pottery stones are generally finely crushed, and used as the material for ceramics, bone china, and sanitary ware (toilets, sinks, etc.).

Products are shipped out from our mine in sizes of <= 10 mm obtained by roughly crushing the stones. They are shipped in bulk or by filling flexible containers using large trucks.
GOLD Member
VERIFIED
Jun-05-21
 
* PHOSCAST
Phoscast : Phosphate Bonded Castables

* PURPOSE
customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system.

BACKGROUND

* Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles.

* GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates.
Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion

* Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected.

APPLICATION
Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.
GOLD Member
VERIFIED
Jun-01-21
 
APPLICATION OF SK-HB K-SILICATE MORTAR :

* K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors.
It is also used for jointing chemical resisting stoneware pipes.
K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles.
The concrete surface needed protection should be dryed, clean and rough.
The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner.

When Bedding and Jointing Materials are the same.
On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints.
The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water.
Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic.
When Bedding and Jointing Materials are Different.
Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR
A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions.

PREPARATIONS OF MORTAR :
* Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan.

* Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar.

* In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared.

* The cement mortar will be used before it starts setting.
GOLD Member
Aug-21-17
Supplier From Dubai, United Arab Emirates
Sep-21-19
 
Recommended For:

Flexible hose between the riser and manifold or around the ball joint of offshore drilling rigs, specially designed to withstand high pressure.



Tube:

Modified Nitrile. Black. Resists abrasion, corrosion, oil, and up to 20% H2S.



Reinforcement:

Multiple layers of textile fabric and steel cable, with one layer middle rubber placed between cable layers.



Cover:

Fire resistant rubber cover, stainless steel armored to handle abrasion, corrosion, cutting, gouging, oil and weather.



Couplings:

Swaged couplings. Full range of couplings are available, such as hammer unions, flanges, camlock, male thread, etc.



Temperature:

-4 to +200 (-20 to +93) continuous service.


Options:

Accessories such as safety clamps and hose lift eyes are available upon request.



Test:

Each hose is tested at 22500psi for 15 minutes. Pressure test graph, test certificate and letter of conformance are issued for each hose.
Sep-10-19
 
Recommended For:

Flexible hose between the riser and manifold or around the ball joint of offshore drilling rigs, specially designed to withstand high pressure.



Tube:

Modified Nitrile. Black. Resists abrasion, corrosion, oil, and up to 20% H2S.



Reinforcement:

Multiple layers of textile fabric and steel cable, with one layer middle rubber placed between cable layers.



Cover:

Fire resistant rubber cover, stainless steel armored to handle abrasion, corrosion, cutting, gouging, oil and weather.



Couplings:

Swaged couplings. Full range of couplings are available, such as hammer unions, flanges, camlock, male thread, etc.



Temperature:

-4 to +200 (-20 to +93) continuous service.


Options:

Accessories such as safety clamps and hose lift eyes are available upon request.



Test:

Each hose is tested at 22500psi for 15 minutes. Pressure test graph, test certificate and letter of conformance are issued for each hose.
Sep-10-19
 
Recommended For:

Flexible hose between the riser and manifold or around the ball joint of offshore drilling rigs, specially designed to withstand high pressure.



Tube:

Modified Nitrile. Black. Resists abrasion, corrosion, oil, and up to 20% H2S.



Reinforcement:

Multiple layers of textile fabric and steel cable, with one layer middle rubber placed between cable layers.



Cover:

Fire resistant rubber cover, stainless steel armored to handle abrasion, corrosion, cutting, gouging, oil and weather.



Couplings:

Swaged couplings. Full range of couplings are available, such as hammer unions, flanges, camlock, male thread, etc.



Temperature:

-4 to +200 (-20 to +93) continuous service.


Options:

Accessories such as safety clamps and hose lift eyes are available upon request.



Test:

Each hose is tested at 22500psi for 15 minutes. Pressure test graph, test certificate and letter of conformance are issued for each hose.

Verification Status