Handheld Metal Detector

Product Introduction:
MD-3003B1 is a small hand held metal detector for security checking. It is easy to use,
without any adjustment controller, fast response to detect metal objects,
sound and LED light mitting alarm simultaneously. A clear low frequency tones sound can be heard
when detect small metals, and high audio tone can be heard when detect large metal objects.

Product Parameters:

1.Alarm Indication : Audio alert and LED indicator work together
2.Sensitivity :3cm(for a RMB one YUAN Coin)
3.Power Supply:9V fold battery (6F22ND),Low battery indication, can connect with recharger,(recharger is optional accessory )
4.Quiescent Current :

Features:
1.equipped with holster, easy to carry.
2.With sound, vibration switch, suitable for different environmental work.
3.With charging function, charging time is 4-6 hours (charger separately).
4.Alarm sound and light alarm, vibration light alarm, flexible choice of mode of operation.
5.High sensitivity, it is easy to detect a pin size metal objects.
6.Low battery voltage warning function.
7.The detector sensitivity is mainly determined by the size, shape and composition of the object being detected.

Applications:
01. Airports,
02. Transport terminals,
03. Buildings,
04. Customs / Border / Government
05. Courthouses,
06. Embassies,
07. Military installations,
08. Prisons,
09. Convention centers,
10. Security checkpoints
11. Special events location

Technical Parameters:

Overall dimensions: Length 410mm x 85mm x 45mm
Working Power: Standard 9v laminated alkaline batteries, or rechargeable batteries
Alarm mode: sound and light or vibration light alarm
Working voltage: 7-9 volts
Working current:

MSL-3003B1-is a high-performance, designed specifically for the security metal detectors, this product can be used in airports, terminals and other search checks. Detection of parcels and letters in the metals and any hidden metal can be detected. Operation: MSL-3003B1 nine volt battery or rechargeable batteries, battery installed at the open the battery cover is fitted with battery attention to negative. Open the on / off switch button, the green light, the detector can now normal work. Detector can adjust the sensitivity and detection range until the red light and a continued sound alarm. Counterclockwise rotation until the red light sensitivity regulator eliminate detector alarm sound disappeared at the most appropriate sensitivity and detection range.

Handheld detectors used in the detection of surface inspection at the top of 10-30 mm back and forth continuously scan the region.

If so when the metal detector alarm will sound and a bright red light. When the metal detector kept at the top of the fixed objects at the detection signal will be automatically reduced, when used in the detector must be constantly scanning back and forth, and this is very important.
Performance: The sensitivity of detectors were mainly from detecting objects the size, shape and composition decisions.

Performance indicators: the largest object detection range of
1. Pin :10-30 mm,
2. Pistol-June 4: 120 mm,
3. daggers: 130 mm,
4. Diameter of 20 mm Ball: 90 mm (raised to the highest sensitivity up to 120 mm).

Sound / vibration switch button:
In the detector side of a sound / vibration conversion button, when in a noisy environment or do not want people to hear the voice of occasions, can switch to vibration. So when the metal detector to detect and alarm, vibration do not produce sound. Battery charger jack can use metal detectors on 9 V rechargeable batteries, rechargeable batteries fully charged need 4-6 hours,
Battery charger jack in the side detectors.
Note: Charging detectors to switch off switch headphone jack:
Detector with a headphone jack, located in the detector side. In noisy work situation or avoid impact on the surrounding environment alarm sound when the use of headphones.
Note: When the green light is not bright or completely unfamiliar with the issue of alarm sound, that probe has not reliable, then should be replaced or rechargeable batteries can be used after.
If the detector does not use a period of time, the proposed removal because of the battery cell so as to avoid leakage caused damage detectors. Detectors do not have to be stored in dry warm environment.

9 V battery voltage or rechargeable batteries, power of 270 mW
22 kHz frequency
Current work <50 mA
V voltage 7-9
Temperature -5 to +55 degrees Celsius NW: 409 grams.

1. High/low sensitivity operation
2. Rechargeable battery socket
3. Earphone socket and vibrator button


20pcs/cartons, 13.4kg, 0.067cbm

Md-200 hand-held metal detector

Features:

1) operating frequency: 20khz

2) weight: 272g (including the battery)

3) size:

A) length: 420mm

B) width: 138mm

C) height: 110mm

4) handle measurement: 30 x 30mm

5) regulate the way: manual

6) indicator: bz, vibration motor

7) led light proves: led red warning indicator lamp, led green insufficient indicator lamp, voltage indicator lamp led battery of power

8) battery: 9v battery (suitable for working for 40 hours normally)

9) control: circulation switch (on, off, a sound of light or mode of vibration)

10) uses cycle-switch to switch sound alarm and hidden vibration alarm respectively.

11) highly sensitive, detect ferrous and non-ferrous and stainless steel weapons

12) sound and light alarm simultaneously

13) alkaline cell (7v-9v) can work over 40 hours and distance does not change

14) warn automatically when short of voltage

15) simple, convenient to use, easy to adjust

16) detecting distances:

A) 1/2 pin: 10mm

B) model 64 pistol: 150mm

C) 6" dagger: 150mm

D) 8mm (diameter): 40mm

E) aluminum & copper sheet: 10mm

F) dip14 ic (integrate circuit): 5mm

G) silver ring (1g): 40mm

H) lead brick (1g): 30mm

íí

The walkthrough metal detectors
Packing ctsn 2 ctns/set.

Model; md3003b1
Power 9v(6f22)
Operate frequency 22khz
Operate current < 50ma
Operate voltage 7v-9v
Indicator Visual: red / green led sound: speaker or earphone;(earphone not included)
Control On/off switch; low sensitivity switch sensitivity adjuster
High sensitivity 15mm at pin; 45mm at usd 25 cent
Low sensitivity Detector only respond to bigger metal
Objects such as a hand gun, knife, etc.
Export packing 25 pieces per carton 0.089cbm
N.W 10.3kg ;g.W 16.5kg
Dimension of unit 41(l) x 8.5(w) x 4.5(h)cm
Weight of unit 409g
Color Black
Attachment for free Holster
Attachment for order Rechargeable battery


25pcs/ctn
Gw: 15kgs

The led monitor embedded at both the left and right sides of the gate leaf can accurately indicate the prohibited articles which are hidden at the places of human body with corresponding height. The alarming areas can be indicated by the column lamps at the both left and right gateposts.
3. It can be connect with computer and the result can be display on the computer(optional).


The metal detecting gate can be operated either thorough the remote control or by the operation panel directly