Low Frequency Bluetooth Scanner

The TS-M1021 is a diminutive Bluetooth module, measuring merely 8 by 12 millimeters, designed for applications requiring minimal size and low power consumption, without compromising on cost-effectiveness. This module is renowned for its remarkable stability and wide-ranging compatibility. It comes with a default setting that facilitates Bluetooth serial port transparent transmission, allowing users to modify serial port baud rates, device names, and additional parameters using the supplied AT commands. This feature enables adaptable operation and straightforward implementation, making the module an ideal choice for a diverse array of customer development projects.

Model No.: TS-M1021

Features

Bluetooth Version: BLE 5.1
Frequency Band: 2.402GHz-2.480GHz ISM band
TX Power: -20dBm~+10dBm
Receive Sensitivity: -97dBm
Air Rate: 250Kbps/1Mbps/2Mbps
Antenna: Ceramic Antenna
Advise Range: 100m

Memory: 512KB FLASH+56KB RAM
Size: 12*8*1.5mm
Pin/GPIO: 12/7
Power Supply: 2.0~3.6V
Operating Temperature: -40~+85
Peripheral Interface: UART/I2C/ADC
Serial Transparent Transmission Rate: BLE 20KB/s

Applications

Smart home
Location tracking
Intelligent educational equipment
Measurement and monitoring system
Industrial sensors and controls
Medical equipment monitoring and wireless control

XH9800 is a SOC (system on chip) for rapid development of Bluetooth low energy related products. It contains a fully compatible system with Bluetooth V5.0 (LE mode). Users can develop various applications based on embedded 32-bit high-performance microcontrollers. XH9800 adopts innovative technology to integrate audio codec, PMU (lithium battery charger + LDO), SPI flash memory in XIP mode, IIC, UART, GPIO, ADC, PWM, etc. in one chip, providing customers with: 1. Lower power consumption 2. Stable connection 3. Low cost BOM.
Bluetooth Smart firmware includes L2CAP service layer protocol, SM (Security Manager), ATT (Attribute Protocol), GATT (Generic Attribute Profile) and GAP (Generic Access Profile). Additionally, application configuration files such as health thermometer, heart rate, blood pressure, blood sugar, Human Interface Device (HID) and SDK (including drivers, OS APIs, etc.) are supported. The SDK integrates SIG Mesh for web applications.
1.1 Features
Compliant with Bluetooth Specification V5.0 LE, supporting data rates of 2M, 1M, 500K and 125K

Embedded 32-bit processor, 12~48Mhz speed

Internal mask 150KBROM, up to 48KB SRAM

Internal 4M Flash ROM for user space software and data

Integrated battery charger

Integrated DC-DC regulator

Mono audio codec

Interface: GPIO UART SPI I2C PWM I2S LED

ROM Software: BLE Profile & Protocol: GATT LM LC etc, Driver API SIG Mesh
1.2 Applications
Voice Remote Control

Smart Toys

Dominant Control

SIG Mesh application

smart locks

Generalscan m100bt 1d laser mini bluetooth wireless barcode scanner barcode reader for ios android windows smartphone pad tablet pc for retail
1d bluetooth barcode scan jacket gs m100bt is small size and powerful new generation barcode scanner. It can combine with smartphone as professional data collection terminal.
Gs-m100bt provides two accessories. One is mobile phone adapter. This adapter can stick on the back of your mobile phone protection case with 3m adhesive tape. You can attach gs-m100bt barcode scanner on the adapter.So you can handle with barcode scanner with mobile phone with one hand.Another is handheld grip. You can plug the gs-m100bt input handheld grip via micro usb plug mount in the handheld grip. There is 800 ma rechargeable battery in the hand holder, it can provide enough power supply for gs-m100bt.On the end of handheld adapter, there is standard rj45-usb cable for you connect with pc. This cable can recharge for gs-m100bt and transfer data to pc.

UDK-CC2540, USB Dongle is a development kit for user to design Bluetooth Low Energy (BLE) application with integrated USB to the system with existing USB host. UDK-CC2540 USB Dongle contains a Bluetooth module BT02-2 using TI Bluetooth low energy controller CC2540. TI CC2540 is a world-leading chip in Bluetooth Low Energy 4.0 and offers variety of peripherals such as USB, UART, SPI and Timer.

UDK-CC2540 USB Dongle also embeds a High-PSRR 300mA LDO, Buttons and LEDs, and General Purpose I/O Test Points. The Dongle can let user focus on their project development and verify the project easily and rapidly.



FEATURES:

* BT02-2 Bluetooth Module with TI CC2540
- Bluetooth version 4.0 low energy (LE, single mode) compliant
- High-performance and low-power 8051 Microcontroller core with code prefetch
- In-system-programmable flash, 256KB
- 12-Bit ADC with eight channels and configurable resolution
- 21 general purpose I/O
- Full-Speed USB Interface
- Power USARTs with support for several serial protocols
- On board PCB Antenna and Crystal
- Module dimension: 14.8 x 10mm

* LDO
- Fast Ultra High-PSRR, Low-Noise 300mA CMOS LDO
- 3.3V Output Voltage

* Variety of Individual Pin Header Sections
- Flash Programming and Debugging
- General Purpose I/O (GPIO)

* Buttons and LEDs
- Input / output function control

* Dongle Dimension: 16mm x 41mm (PCBa) ; 16mm x 56mm (including USB connector)

TS-M1020D is an 8*12mm ultra-small size Bluetooth low power ultra-low cost Bluetooth module, the module is a Bluetooth 5.2 chip, integrated BLE+SPP dual Bluetooth protocol, with excellent stability and compatibility. Module default Bluetooth serial port transparent transmission, the user can change the serial port baud rate, device name and other parameters according to the provided AT instructions, flexible operation and simple use. Suitable for various development projects of customers.

Model No.: TS-M1020D

Features

Bluetooth Version: BLE 4.2+SPP 3.0
Frequency Band: 2.402GHz-2.480GHz ISM band
TX Power: -20dBm~+4dBm
Receive Sensitivity: -95dBm
Air Rate: 250Kbps/1Mbps/2Mbps
Antenna: Ceramic Antenna
Advise Range: 80m

Memory: 256KB FLASH+128KB RAM
Size: 12*8*1.5mm
Pin/GPIO: 12/7
Power Supply: 3.1~4.35V
Operating Temperature: -20 ~+85
Peripheral Interface: UART/SPI/I2C/ADC
Serial Transparent Transmission Rate: BLE 4KB/s, SPP 16KB/s

Applications

Smart home
Location tracking
Intelligent educational equipment
Measurement and monitoring system
Industrial sensors and controls
Medical equipment monitoring and wireless control

The TS-1105 is a portable, card-like Bluetooth iBeacon device that uses a Bluetooth low-power chip design and features low power consumption and small size.It is equipped with a CR2032 battery that can last up to two years at 1s broadcast frequency.
Model No.: TS-1105L
Bluetooth Version: Bluetooth 5.1
TX Power-19.5~+2.5 dBm, Default +2.5dBm
OTA: YES
Distance60mBatteryCR 2032 (Replaceable)
Battery Life2 Years
CertificationBQB, FCC, CE, SRRC, RoHS, REACH
Color: White
Weight: 7g
Size: 46*41*6mm
OEM Custom: color, Print Logo, OEM Package, Software

New Mini LED Light Portable Wireless Speaker IPX5 waterproof Bluetooth Speaker strong bass Zealot speaker S53



Main Features:



1.Bluetooth music player
2.Support TF card
3.3.5mm stereo jack can connect Audio player
4.Portable, easy to carry
5.Good touch feeling

6.Colorful LED lighting



Parameter:



Bluetooth version: 5.0
Charge voltage:DC5V/1A
Speaker:4 10w 57mm
Transmission distance:10M
Frequency response: 20Hz-20KHz
Outpower: 10W
S/N: 90dB
Working voltage:3.7V
Distorsion:1%
Talking time:5H
Music time:4H
Standby time:>90days
Charge time:2h
Battery capactiy:3000mA

1. Product introduction
kbj-152n
bluetooth version: 4.0
the supported devices:bluetooth mobile phones, bluetooth speakers, bluetooth pc and other bluetooth devices
the maximum work range:33 feet (10 meters)
battery capacity: 160mah
music play /talk time: around 7~9 hours
charging time: around 3 hours
charging voltage: dc 5v
frequency response:2.402ghz~2.480ghz

2. Other information
moq: 3k
trade term: fob shenzhen
comply with rohs ce fcc standard
delivery time: 30-40 days once the order is confirmed



Color box + blister tray + manual;
Customized packing is acceptable!