ACME vacuum furnace is VDP standard type brazing and diffusion furnace mainly used for diffusion treating tubing blade, falcon head, missile fuse process in aerospace and boat area. Diffusion welding is widely used for diffusion welding in different kinds of metal materials, also for different metal and ceramic materials and non-metal material diffusion welding.
Features:
1.Double layer steel casting with air cooling fans to keep case temperature lower;
2.High purity fiber alumina board chamber for the best energy saving;
3.The temperature is controlled by precision scr(silicon controlled rectifier) with accuracy +/-1 c and 30 segments programmable control;
4.The fast rate of temperature increasing and decreasing.
5.The furnace chamber is ceramic fiber brick with excellent thermal insulation, vacuum reservoir with water cooling system
6.The furnace is equipped with the function of power off automatically when door furnace opening, function of over temperature alarm, etc.
Descriptions:
Chamber dimension 150x150x150mm
Max. Temperature 1600c
Working temp.
Advantage:
Heated by 1800C Molybdenum Disilicide (MoSi2) heating elements,
Alumina tube size (Outer Diameter): 60mm, 80mm, 100mm,
51 steps programmable temperature control,
Furnace can be vacuumed or filled with protection gas
GSL1700 Tube furnace is advanced type of GSL-1600. It's heater by 1800C MoSi2 heating elements. This furnace is widely used in Material and Chemical laboratory used for heating all kinds new samples at vacuum or gas protection environment. Temperature is controlled by high accuracy controller which can reach to +/-1C, and it can set 51 steps temperature program. The highest working temperature of this furnace is 1750C.
Furnace Tube High Purity Alumina Tube
Sizes of Furnace Tube ID: 50mm / OD: 60 mmá x 1000 mm long
Heating Elements á6 PCS 1800C á MOSI2
MAX. Temperature 1700C
Working Temperature 1600C
Temperature Control PID Auto Control, 51Steps Program
The Fastest Heating Rate 10C / min
Heating Zone Length á457 mm ( 18")
Constant Temperature Zone 150 mmá (6")
Temperature Accuracyá +/-1C
Voltage single, 220V AC, 50/60 Hz
Power Max. 5KW
Size 550 L x450 W x670 Há mm
Net Weight 150 kg ( 330 lbs )
Package Size á47" x 45"x 45"(1200L x 1150W x 1150Hmm) .
ShinTek can produce varieties of Vacuum Furnaces, including Vacuum heat treatment Furnace, Vacuum Brazing Furnace, Vacuum Sintering Furnace, Vacuum Induction Melting Furnace and so on…
The Vacuum Furnace can be used for a wide of industries, including High Speed Steel, Die Steel, Alloy Steel, Aluminum and Aluminum alloy, Ti alloy, Beryllium Bronze, Precision alloy, Stainless Steel, High temperature alloy, refractory metal, hard metal, magnetic material, nonferrous metal, etc…
Vacuum Furnace Specifications:
Model STVF-Q-40 STVF-Q-65 STVF-Q-85 STVF-Q-120 STVF-Q-160 STVF-Q-240 STVF-Q-500
Working zone size 450*300*300 600*400*400 750*500*500 900*600*600 1100*700*700 1200*800*800 3500*800*600
Load (KG) 60 150 250 500 800 1000 2500
Power 40KW 65KW 85KW 120KW 160KW 240KW 500KW
Max. temperature 1350?
Temperature uniformity +/-5? (can achieve +/-3?for some specific project.)
Ultimate vacuum level (Cold) 8*10-4 Pa
Leakage rate =0.67 Pa/h
Vacuum Furnace features:
(1) Vacuum Furnace – Patented hotzone design enable a high energy efficiency;
(2) Vacuum Furnace – High vacuum level, enable it can be used for a wide of industries;
(3) Vacuum Furnace – Several kinds of heating elements for choose, customized for your specific projects: Graphite, SS, Ni-Cr, Mo, MoLa, TZM, Tungsten…
(4) Vacuum Furnace – Reasonable hotzone design enable a high temperature uniformity;
(5) Vacuum Furnace – Friendly control system.
Vacuum precision casting furnace is designed for Melting heat-resistant high-temperature alloy material,and Casting of Equiaxed under vacuumed condition as well as for directionally solidified (DS) or single crystal (SC) structures .
Efficiency :Crucible Basket to ensure fast crucible exchange and continuous operation.
Easy operation: Humanized operation interface; rotary tower charging and temperature measuring devices to freely switch between load charge material and read temperature.
Sample size:dia60xhz300mm
Max temp:1600deg.C
Working temp:1500deg.C
Vacuum: 10pa
Accurancy:+-1deg.C
Heating element:mosi2 heating element
Controller:30 steps program and pid auto control
Thermocouple:b type
Configuration accompanied the machine
Air agitator, vacuum pump (including cooling water pump that is started in the same step, water tank), electric control system, electric heating system, 5 layers silica rubber bags, furnace body and electric load/unload section.
Parameter :
1.Dimension (L*W*H):3750*2250*2000 mm
2.MAX. area of glass to be processed: 3100*1800 mm 5 layers silica rubber bags (its size: 3400*1950mm)
3.Thickness: 3-15mm
4.Power: 43KW
5.N.W: 2.5T
6.Layer:5 layers (for circulating)
