Temperature Only Test Chamber

Benchtop Temperature humidity Test Chambers are Small, bench-top test chamber for simulating temperature and humidity environments. Included only temperature, temperature and humidity test chambers. Widely used in electronics, automotive, manufacturing, research and laboratories. Its very good advantages are small, desktop, small footprint, portable, stable performance and Full function. A Benchtop Environmental Chamber offers flexibility, uniformity, and control accuracy. Small & Affordable.

Model Number: L-BT series
Function: Temperature, humidity
Volume: 40L ~ 64L
Temperature range:-70 ~180 °C
Ramp rate: 1 °C/min
Humidity range: 20%RH~98%RH

Walk-in Room Available  Constant Temperature and Humidity Test chamber
Applicable range Walk-in Room Available  Constant Temperature and Humidity Test chamber  are applicable for testing the performance indexes of aeronautic & astronautic products,ships,weapon, accdemies, motorcycle, information electronics,instruments & meters, materials, electronic engineering, electronic products, various electronic elements, foodstuffs, chemistry, building materials, luggage, adhesion tape, printing, packaging, materials, plastics, medical and so on in  high-low temperature and humidity alternation environment.  Features(Walk-in Room Available  Constant Temperature and Humidity Test chamber)

JHG fire-resistant glass is combined with borosilicate glass and float glass technology, which fire resistant properties much superior to those of sode lime glass , the main character is :
* high performance to bear high temperature , our tempered borosilicate glass 4.0 can withstand 120 minutes fire test .
* Ultra light ,borostilicate glass 8% less than sode lime glass
* Hign soften point in fire
* High ligh transmission
* No SO2 pollution ,no self-explosion

Borosilicate 4.0 Technical data :
Size: 1830*3000mm
Density (g/cm�?�³) : 2.28�?�±0.1
Co-efficient of expansion (�?�±)(20-300�¢??) : 4.0�?�±0.1�??10-6k-1
Softening point(�¢??) : 845�?�±10
Light transmission :�?�  �¢?�¥90(6mm)

Main usage :
4.0 building partition ,facade ,door ,ceiling ,floor
3.3 household application ,optics , lighting

This chamber is for temperature & humidity tests, cold resistance tests, thermal cycle tests, ultra-low temperature tests, high-temperature tests, storage conditions, and calibration functions.

Temperature Cycling Test Chambers
Fast change rates test chamber
Temperature Cycle Test Chamber
Fast change rates testing chamber is suitable for testing the changes of instruments,electrical,electronic products,machine�and�parts�under�the�rapid�temperature change�or�the�the�gradient�conditions, takes advantage of compact, modern scroll compressors to bring fast temperature cycling to small form factor. Temperature cycling rates from 5 to 20�C/min. are possible. Two different ultimate low temperatures are available: -40�C or -70�C.
The faster cycle times can be used to meet more aggressive test methods that require thermal stress during transitions. Significant test time can be saved in completing tests, as well.
To demonstrate performance, Grande uses the international standard IEC 60068 3-5 measured at the supply air. Temperature cycles are run from hot to cold extremes, and the middle 80% of the transition is timed to determine performance. Your actual cycling results will vary depending on methodology, including the start and end temperatures, and the amount of samples loaded.
Features
QUALITY CONSTRUCTION
Stainless stee l exterior and interior
Rounded interior corners for easy cleaning
Full thermal break around doorframe and door
Rotating door latch is easy and secure
Dual-layer insulation of fiberglass and expanded foam for thermal integrity
One 2" (50mm) to One 4" (100mm) diameter cable port on the left, with an impervious, flexible silicone plug
Easy lift-off service panels
Pressure relief port to allow air volume changes due to rapid temperature changes
Three levels of overheat protection
FTF PROGRAMMER/CONTROLLER
Popular PID controller with touch-screen operation
Stores 120 different profiles�with up to 1200 steps each (ramp, soak, jump, auto-start, end)
Step types include: ramp, soak, jump, auto-start, and end
Ethernet interface for remote monitoring and operation
RECOMMENDED OPTIONS
Dry air purge, to compensate for quickly shrinking air during cooling, as well as to reduce risk of condensation.
Product temperature control, allows feedback from a second sensor on the product. Ensures faster completion of transition steps.

Features:
Large viewing window with heaters for monitoring the test status anytime.
Stable and user-friendly programmable touch screen controller
Cable access ports (additional ports available upon customer's requirements)
High quality and adjustable specimen shelves
Multi levels safety protection devices
Strict function test and manufacturer's temperature calibration before package
Superb service will be provided
Structures
External: double galvanized metal steel sheet, with spray-paint electrostatic processing surface
Internal: high quality stainless steel with mirror polishing
Insulation: rigid polyurethane foam and glass fiber
Heater: nickel chrome alloy

Features
Rapid design and installation capabilities
Temperatures range: -70â°c to +150â°c
Excellent temperature uniformity.
Built-in reliability: all major sub-systems procured from world class manufacturers.
Easy to use: easy to use graphic interface for test environment setup, through programmable touch screen controller.
-temperature range: -20 degree celsius to 180 degree celsius , -40 degree celsius to 180 degree celsius, -60 degree celsius to 180 degree celsius, -70 degree celsius to 180 degree celsius for optional.
- ramp rate: 1 degree celsius /min
- different size available, from 100l to 1000l.
- excellent temperature uniformity.
- easy to use:friendly human-machine interface
- controller: programmable touch screen controller

Programmable Temperature and Humidity Testing Machine are the necessary test equipment for aircraft industry, automobile industry, home appliance industry and scientific research field, it can be used to test and determine the parameters and performance of electrical, electronic products and materials upon change of the temperature environment in high-temperature, low-temperature or constant tests.

Programmable Temperature and Humidity Testing Machine are able to provide rapid product temperature change rates and use varying levels of relative humidity to locate design problems prior to shipping your products, improving product quality and reliability.

LINPIN's Bench top Chambers offer flexibility, uniformity, and control accuracy required for cost effective testing for a variety of products. Ideal for testing the products such as computer components, automobile sensors or cellular phones, these chambers combine superior performance with compact design that is ideal for research and development or personal point-of-use testing.
Available in several sizes, Bench top Chambers allow you to cost effectively select the exact chamber that best meets your environmental test criteria.