TF-LP01 Laser PM2.5 Sensor Description
TF-LP01 type laser particle sensor is a small module for detection of particles in the air with scattering principle. It features compact size, high accuracy, repeatablity and consistency, and strong resistance against interference. It adopts ultra-silent fan, and is able to response in real-time and collect data continuously. The sensors are 100% tested and calibrated in factory.
TF-LP01 Laser PM2.5 Sensor Features
* High accuracy
* Fast response
* Compact in size
TF-LP01 Laser PM2.5 Sensor Applications
* Air purifier, portable air quality detector, smart home, etc.
TF-LP01 Laser Particle Sensor Description
TF-LP01 type laser particle sensor is a small module for detection of particles in the air with scattering principle. It features compact size, high accuracy, repeatablity and consistency, and strong resistance against interference. It adopts ultra-silent fan, and is able to response in real-time and collect data continuously. The sensors are 100% tested and calibrated in factory.
TF-LP01 Laser Particle Sensor Features
* High accuracy
* Fast response
* Compact in size
TF-LP01 Laser Particle Sensor Applications
* Air purifier, portable air quality detector, smart home, etc.
Product Description
WDS308 Integrated dust monitoring sensor is a specialized small instrument applied to monitor dust at construction sites. It can monitor eight meteorological elements, wind speed, wind direction, air temperature, air humidity, air pressure, rainfall, radiation, UV index, and can also monitor three environmental factors, PM2.5, PM10 and noise. The system is modularized and can be configured flexibly. Small volume, low cost, and it suitable for industrialized intensive stationing monitoring.
Apogees NDVI sensors are designed to measure reflectance in red and near infrared wavebands to calculate the normalized difference vegetation index (NDVI). NDVI is a measurement of plant greenness correlated with canopy chlorophyll content and leaf area that is used to monitor green-up in the spring and senescence in the fall.
LLE Series Liquid Level Sensors Description
The enhanced series of liquid level sensors incorporates a photo-transistor trigger which provides a digital output that denotes the presence or absence of liquid.
The mode of operation is derived from the principle of total internal reflection. An LED and photo-transistor are housed within a plastic dome at the head of the device. When no liquid is present, light from the LED is internally reflected from the dome to the photo-transistor. When liquid covers the dome, the effective refractive index at the dome-liquid boundary changes, allowing some light from the LED to escape. Thus the amount of light received by the photo- transistor is reduced and the output switches, indicating the presence of liquid. This method of liquid level sensing is very fast, and almost instantaneous for water.
LLE Series Liquid Level Sensors Features
* Solid state technology
* Small size
* Digital output
* Pre-wired
* Electrically robust
LLE Series Liquid Level Sensors Benefits
* Accurate, repeatable switching point
* Can be mounted in applications where space is limited
* Microprocessor compatible
* Easy to install, saving assembly time
* Reverse polarity, over voltage, short circuit and transient protection
LLE Series Liquid Level Sensors Typical Applications
* Home appliances
* Spa baths
* Vending machines
* Food and beverage
* Medical
* Compressors
* Machine tools
* Automotive
LLE Series Liquid Level Sensors Technical Specifications
* Repeatability: ±1mm
* Hysteresis: 2mm (dependent on liquid)
* Material: Polysulphone
* Operating temperature: -40 to 125'C (-40 to 257'F)
* Storage temperature: -40 to 125'C (-40 to 257'F)
* Supply voltage: 5 Vdc to 12 Vdc
* Supply current: 5 mA nominal @ +5 Vdc
Application:Application ? air conditioners, refrigerators, freezers, water heaters, water dispensers, heaters, dishwashers, disinfection cabinet, washing machines, dryers and other appliances on. ? car air conditioners, water temperature sensor, intake air temperature sensor, engine ? Switching power supply, UPS uninterruptible power supply, inverter, electric boilers, etc. ? smart toilet, electric blankets, etc.
The Product Sells Point:
Key Specifications/Special Features:
A: Size chart
MF52 NTC with epoxy to lead
Note: The size and wire color according to customer requirements!
II: Product Features:
1: MF52 series of products for the lead with an epoxy coating type
2: Wide range of resistance: 0.1KO ~ 500KO
3: Resistance and B value of high accuracy
4: moisture proof, good insulation, high reliability, small time constant
5: small, reflecting the speed
6: is stable for a long time, consistency
7: Operating temperature range: -40 ~ 125 ?
3: Product Applications:
Air-conditioning equipment, heating equipment, medical equipment, temperature control instrumentation, electronic gifts, electronic hygrometer, car thermometer, electronic calendar, rechargeable battery pack and charger, laptop batteries.
Four: Model Description
MF 52 103 F 3950
? ? ? ? ?
?MF ¬-- negative temperature coefficient (NTC) thermistor Code.
?52-- epoxy encapsulated NTC thermistor temperature sensor.
?103 - thermistor nominal resistance, indicating that the nominal resistance of the resistance: 10 × 103 (O).
Error ?F-- resistance value (accuracy) is: F = ± 1%, G = ± 2%, H = ± 3%, J = ± 5%
?3950-- thermal resistance index (material factor) B is: 395 × 10 (K)
Five: MF52 Series Model Specification
Note: according to customer requirements, provide different resistance, B value precision, customization.
NTC thermistor measurements must note the following:
• can not be measured in the air, the larger the difference in air temperature measurement inaccurate, resulting accuracy deviation.
• After using the high-precision measurements of the bath, measured after NTC into the bath, the bath temperature must be stable before measurement.
• Measure the voltage as low as possible in order to reduce measurement errors due to self-heating NTC.
• High temperature measurement, required temperature bath thermometer correction, check
Product Applications: 1: induction cooker, electric pressure cookers, rice cookers, electric oven, disinfection cabinet, water dispenser, microwave ovens, electric heaters and other appliances temperature control and temperature sensing. 2: Electronic thermometer 3: temperature control and detection of industrial, medical, environmental, weather, food processing equipment 4: hygrometer temperature control and detection 5. Air conditioning equipment, heating equipment, temperature control instrumentation, electronic gifts, electronic hygrometer, car thermometer, electronic calendar, a rechargeable battery pack and charger
The Product Sells Point:
Key Specifications/Special Features:
1: Appearance production requirements:
1: cylindrical shell size: 3 * 8,4 * 20,5 * 25,5 * 30,6 * 30,5 * 80,6 * 100, etc. (can be customized according to customer requirements), the unit: (MM)
2: File Dimensions: can be customized according to customer requirements
3: Cable length: according to customer requirements
4: Wire: PVC and Teflon wire and cable (customized)
5: Wire colors: black, white, red, yellow, green (can be customized according to customer requirements)
6: thermistor parameters: according to customer requirements
7: Housing Material: nickel-plated brass or stainless steel
2: Product Features:
1: MF53 series NTC thermistor for temperature sensor
2: Wide range of resistance: 1KO ~ 500KO
3: Resistance and B value of high accuracy, consistency, and interchangeable
4: good insulation, high reliability, reflecting the fast,
5: with double sealing process, with good sealing and insulation resistance to mechanical impact, anti-bending ability, high reliability
6: Can a long time stability (in the resistance drift rate =1 ‰)
7: The package can be used depending on the installation conditions, user-friendly installation
8: Operating temperature range: -40 ~ 200 ?
3: Model Description:
MF 53 103 F 3950
? ? ? ? ?
?MF ¬-- negative temperature coefficient (NTC) thermistor Code.
?53-- various band shell temperature sensor NTC thermistor.
?103 - thermistor nominal resistance, indicating that the nominal resistance of the resistance: 10 × 103 (O).
Error ?F-- resistance value (accuracy) is: F = ± 1%, G = ± 2%, H = ± 3%, J = ± 5%
?3950-- thermal resistance index (material factor) B is: 395 × 10 (K)
Note: according to customer requirements, provide different resistance, B value precision, customization.
NTC thermistor measurements must note the following:
• can not be measured in the air, the larger the difference in air temperature measurement inaccurate, resulting accuracy deviation.
• After using the high-precision measurements of the bath, measured after NTC into the bath, the bath temperature must be stable before measurement.
• Measure the voltage as low as possible in order to reduce measurement errors due to self-heating NTC.
• High temperature measurement, required temperature bath thermometer correction, check
Supplier: Pneumatic valve, air cylinder, gripper and actuator, proximity sensor, index drive, worm gear, vacuum transducer, slides and ballscrew, vibratory controller, power supply, electric motor
