Hwps 9 Bent Steel Power Distribution Cabinet

1. Frame of the cabinet is made by the steel with nine times bent for highly
strength, we've chosen specialized support frame welded together, so the
structure is firm, able to carry a heavy load. Arrangement of cables is quite
handy.

2. We apply SPCC cold rolled steel sheet or stainless steel sheet for all of our
products, 2mm thickness of front door, 1.5mm thickness of panels, 1.2-
1.5mm thickness of top cover, 2.5mm thickness of galvanized mounting plate.

3. Top cover, side panel, rear panel and bottom cover are fastened by bolts
and fasteners, it's easy for both assembly and disassembly. Thus the
installation in cabinet is much handier.

4. All of doors, panels apply PU FOAM made by full-automatic numerical
control Auto Gluer, and the door is 3 points locked(up, mid, down) which
ensure that cabinet is highly enclosed. It meets the standard of IP55.

5. Mounting plate can be adjusted back and forth for the distance of multiple
of 25mm, interior devices can be adjusted vertically and horizontally for the
distance of multiple of 25mm.

6. The door, top cover, frame are all able to earth. There are 3 fixed shelf at
the bottom for cable arrangement

7. Double door and single door are optionally available.130 degree door
swing, the height of the door above ground is 25mm.The internal surface of
the door has a frame with slots which separated by space of 25mm. In
addition, it provides horizontal steel beam for strength and be more flexible
for cable arrangement.