Rolled Threaded Bars

High Strength Screw Thread Bar
There are two large steel mills and thousands of fasteners factories.
We have experience in exporting thread bars to over 35 countries around the world.

hot rolled screw thread bar manufacturer which can serve
(diameter from 15mm to 50mm,grade PSB830, PSB930, PSB1080)and all related
accessories(anchor hex nut, bearing plate, domed nut, and coupler). 
In addition could produce fasteners such as bolts, nuts, screw rod and steel plates.
Our factory sells 3000MT thread bar and fasteners each month.

Tie rods/ Thread bars are used for soil nailing, formwork tie, tie back, tie
rod, scoffolding, post tensioning system, geotechnical, mining and tunneling, etc.
We have launched new product D15/17 TIE ROD (diameter 15mm, yield strength 830MPA, tensile strength 1030MPA) for customers.

The length of the finished thread reinforcement is usually 9 m and 12 m.
the THREAD BAR diameter is from 15MM to 50MM
The grade of yield strength tensile strength post-fracture elongation is as follows:
PSB830, yield strength 830MPA, tensile strength 1030MPA, elongates after fracture 6%
PSB930, yield strength 930MPA, tensile strength 1080MPA, elongates after fracture 6%
PSB1080, yield strength 1080MPA, tensile strength 1230MPA, elongates after fracture 6%
There are no ribs on the threaded bar which means the hex nut or coupler can be used at any point.
We also serve corrosion protection like zinc galvanized and epoxy coating.

Threaded Bar

THread Bar - Material - MS. Size -
3/4" - 10x 8" (4" thread)
3/4" - 10 x10" (6"thread)
3/4" - 10x 12" (6" thread)
3/4" - 10 x14" (6" thread)
3/4" - 10 x 16" (6" thread)
3/4" - 10 x 20" (6" thread)
3/4 " - 10 x 24" (6" thread)

Features- square head bolt,semi cone point vith square nut,

Finish - Hot dip galvanized/ zinc

Thread Bars

We provide rock bolts friction stabilizers and thread bars We have hundreds of professional processing equipment We have more than ten independent production lines The annual production capacity is millions 

Our anchor system contains Hollow bar Drill bit Coupling Nut Plate Centralizer and Plug The hollow bars ranging from R20 to R50 T30 to T200 We also can tailor make on your requirements

we are the manufacturer and traders of all kind of heavy duty fasteners for the each and every type of heavy product just like heavy valves.

each and every kind and types of material and fasteners available with us.

we have a three units and enough worker to fulfil any order.

we also have unmatchable quality also.we are supplying in lots of valves company here in india without any complain regarding quality.

now we are searching for new opportunities for our product.

Product Details:
Usage/Application Industrial
Type Lap Joint Flanges
Size 1-5 inch, 0-1 inch, 20-30 inch, 5-10 inch, 10-20 inch
Material Standard ASTM A182, ANSI B16.5, ASTM A351, ASTM A105
Rated Pressure (Bar) 2500
I Deal In New Only
Material Stainless Steel
Country of Origin Made in India

We can offer vide range of Lap Joint Flanges from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. Various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Fittings, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc.

Flange Standards: API 6A, ANSI, ASME, DIN, EN1092-1, UNI, JIS/KS, BS4504, GB, AWWA C207, GOST, PSI.

Specifications: Can offer Lap Joint Flanges as cast, forged, normalized, annealed, quenched (hardened) tempered condition with black or bright (proof machined) finish.

Various type of IBR approved Flanges that can be procured are as follows: Blind, Slp-On, Welding Neck (Weldneck), Long Welding Neck (LWN), Socket Weld, Lap Joint, Threaded, Spectacle Blind, Plate, Collar, Flat Face, Raised Face, Ring Type Joint, etc.

Size range of flanges that can be offered are �½â?? inch upto 60â?? inch depending on type, class grade of flanges.

Class of flanges: #150, #300, #400, #600, #900, #1500, #2500

Carbon Steel: ASTM A350 LF2, ASTM A105N, 224Gr.490, A737Gr.B, K03011, 1.0566, TStE355, A510FP1, FeE355-3, K03504, 1.0460, P250GH, C22.8

Alloy Steel: 4130, 708A30, G41300, 1.7218, 25CrMo4, 30CD4, 30CrMo4, SCM420, 30ChM, 4340, ASTM A387 Grade P1, A387 Grade P5, A387 Grade P9, A387 Grade P11, A387 Grade P12, A387 Grade P22, A387 Grade P91, A182 Grade F1 Class 1, A182 Grade F5, A182 Grade F9, A182 Grade F11 Class 2,

Stainless Steel (SS): 304, 304L, 309, 310, 316, 316L, 316Ti, 317, 317L, 321, 329, 347
Duplex Steel (DSS): 2205, ASTM A182 F60, F51, UNS S32205, S31803, 1.4462, X2CrNiMoN22-5-3, AFNOR Z3CND22-05Az

Super Duplex Steel (SDSS): 2507, Zeron 100, ASTM A182 F53, F55, UNS S32750, S32760, DIN 1.4410, 1.4501
Inconel: Alloy 600, 601, 625, 690, 718, N06600, N06601, N06625, N06690, N07718, AFNOR NC 15Fe, NC19FeNb, 2.4816, 2.4851, 2.4856, 2.4668
Incoloy: Alloy 800, 800H, 800HT, 825, UNS N08800, N08825, AFNOR 25NC35-20, WFe32C20DU, 1.4876, 2.4858,
Monel: Alloy 400, K-500, 2.4360, 2.4375

Hastelloy: Alloy C276, C22 UNS N10276, N06022

Copper(Cupro) Nickel: CU-NI 90/10, CU-NI 70/30

Titanium: Alloy Grade 2, 5