10 Tonner Mining Trolley Locomotive

10 ton Trolley Locomotive for Metal Mine
The model has two kinds of working rated voltage:250v and 550V. It applies primary driving way, speed control of IGBT chopping wave type or resistor type or VF type. Main fetures include:short wheel base, high stiffness of vehicle body, and good shockproof performance. The braking type is mechanical or electric braking. Both mechanical braking and electric brking have safe and reliable effect.
Adhesive / total weight (t) : 10 ton
Track gauge (mm) : 600.762.900
Traction (KN) : 13.05 18.93
Max. Traction (KN) : 24.5
Speed(km/h) : 11, 10.5
Power (KW) : 21*2 30*2 24*2
Dimensions
Length(mm) : 4550, 4650
Width(mm) : 1050,1212or 1350
Height(mm) : 1600
Wheelbase (mm) : 1100
Wheel diameter (mm) : 680
Min Curve radius (m) : 7,10
Controller : Resistencia or IGBT
Braking method : Mechanical

10 ton Trolley Locomotive for Metal Mine
The model has two kinds of working rated voltage:250v and 550V. It applies primary driving way, speed control of IGBT chopping wave type or resistor type or VF type. Main fetures include:short wheel base, high stiffness of vehicle body, and good shockproof performance. The braking type is mechanical or electric braking. Both mechanical braking and electric brking have safe and reliable effect.
Adhesive / total weight (t) : 10 ton
Track gauge (mm) : 600.762.900
Traction (KN) : 13.05 18.93
Max. Traction (KN) : 24.5
Speed(km/h) : 11, 10.5
Power (KW) : 21*2 30*2 24*2
Dimensions
Length(mm) : 4550, 4650
Width(mm) : 1050,1212or 1350
Height(mm) : 1600
Wheelbase (mm) : 1100
Wheel diameter (mm) : 680
Min Curve radius (m) : 7,10
Controller : Resistencia or IGBT
Braking method : Mechanical

Narrow Gauge 10 Ton Mining Trolley Locomotive

Trolley electric locomotive is a kind of rail transportation traction equipment, powered by transformers and overhead lines. Mainly used in mines where there is no risk of explosion. Because of its special power supply mode, the trolley electric locomotive has no limit on the cruising range. Therefore, it is suitable for long-term and long-distance use. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method.

Adhesive / total weight (t) 10 ton
Track gauge (mm) : 600.762.900
Traction (KN) : 13.05 18.93
Max. Traction (KN) : 24.5
Speed(km/h) : 11, 10.5
Power (KW : 21 2 30 2 24 2
Dimensions Length(mm) : 4550, 4650
Width(mm) : 1050,1212or 1350
Height(mm) : 1600
Wheelbase (mm) : 1100
Wheel diameter (mm) : 680
Min Curve radius (m) : 7,10
Controller : Resistencia or IGBT
Braking method : Mechanical

10t mining trolley locomotive for mining

The model has two kinds of working rated voltage:250v and 550V. It applies primary driving way, speed control of IGBT chopping wave type or resistor type or VF type. Main fetures include:short wheel base, high stiffness of vehicle body, and good shockproof performance. The braking type is mechanical or electric braking. Both mechanical braking and electric brking have safe and reliable effect.

Adhesive / total weight (t) : 10 ton
Track gauge (mm) : 600.762.900
Traction (KN) : 13.05 18.93
Max. Traction (KN) : 24.5
Speed(km/h) : 11, 10.5
Power (KW) : 21*2 30*2 24*2
Dimensions
Length(mm) : 4550, 4650
Width(mm) : 1050,1212or 1350
Height(mm) : 1600
Wheelbase (mm) : 1100
Wheel diameter (mm) : 680
Min Curve radius (m) : 7,10
Controller : Resistencia or IGBT
Braking method : Mechanical

Product Description
CJY7/6GP CJY7/7GP CJY7/9GP
Adhesive Total Weight (t) 7 7 7
Track Gauge (mm) 600 762 900
Wheelbase (mm) 1100 1100 1100
Wheel Diameter 680 680 680
Coupler Height over 320/430 320/430 320/430
Min Curve radius (m) 7 7 7
Pantograph Operation 1800-2200 1800-2200 1800-2200
Braking Method Mechanical&Electrical Mechanical&Electrical Mechanical&Electrical
Max Tractive Effort (KN) 19.2 19.2 19.2
Max Speed (km/h) 20 20 20
Rated Speed per 10 10 10
Power of Traction 2*22 2*22 2*22
DC Input Power Voltage DC250/550 DC250/550 DC250/550
Transmission Single Level Spur Gearing Single Level Spur Gearing Single Level Spur Gearing
Controller AC Frquency Conversion AC Frquency Conversion AC Frquency Conversion
Over all Dimensions (mm) 4460*1060*1590 4400*1340*1590 4400*1340*1590
Service & Application Mucking in Mining&Tunneling Mucking in Mining&Tunneling Mucking in Mining&Tunneling
Price (USD) 24667 24667 2466

Our Service
Pre-sales Service:
The wide product range enables us to provide our customers with individual machines or complete processing plants.Based on our customers'request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order.
After-sales Service:
Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customers'plants.Necessary training about machine daily maintenance to local workers is provided also.
Methods of Payment:
T/T (Telegraphic Transfer) or Western Union or L/C at sight
Handling time for an order:
Within 10 days supplied from stock
Shipping method:
Sample order: we suggest Courier express like DHL/UPS/TNT/FedEx or by air
Bulk order: we suggest by air or by sea.
Quality Control:
We have our own experienced QC.
There will be strict inspection and testing for every order before shipping out.
5. After Services:
a. Our sales team will response for your question within 24 hours (Holidays Excluded)
b. Technical Support will be available in any time
c. Free replacement will provide once the failure confirmed caused by our product quality

14 ton mining trolley locomotive

The locomotive is a new product specially designed for large mines. It applies IGBT speed control way, realizes smooth starting and low failure rate, and is a new- generation energy efficient product. Main features include: small outer diamensions, short wheel base, small turn radius, high speed and strong traction force.
V-shape rubber damps are used on this locomotives in order to bear viration and impact from lengthways, vertical and transverse directons. The sails are elastic rubber plates which can ensure a reduced shock in operation.

Adhesive / total weight (t) : 14 ton
Track gauge (mm) : 600.762.900
Traction (KN) : 26.68
Max. Traction (KN) : 34.3
Speed(km/h) : 12.87
Power (KW) : 52 2
Dimensions Length(mm) : 4800
Width(mm) : 1060,1222or 1360
Height(mm) : 1700
Wheelbase (mm) : 1700
Wheel diameter (mm) : 760
Min Curve radius (m) : 12
Controller : Resistencia or IGBT
Braking method : Mechanical

14t mining trolley traction locomotive

The locomotive is a new product specially designed for large mines. It applies IGBT speed control way, realizes smooth starting and low failure rate, and is a new- generation energy efficient product. Main features include: small outer diamensions, short wheel base, small turn radius, high speed and strong traction force.
V-shape rubber damps are used on this locomotives in order to bear viration and impact from lengthways, vertical and transverse directons. The sails are elastic rubber plates which can ensure a reduced shock in operation.

Adhesive / total weight (t) : 14 ton
Track gauge (mm) : 600.762.900
Traction (KN) : 26.68
Max. Traction (KN) : 34.3
Speed(km/h) : 12.87
Power (KW) : 52*2
Dimensions Length(mm) : 4800
Width(mm) : 1060,1222or 1360
Height(mm) : 1700
Wheelbase (mm) : 1700
Wheel diameter (mm) : 760
Min Curve radius (m) : 12
Controller : Resistencia or IGBT
Braking method : Mechanical

Trolley electric locomotive is a kind of rail transportation traction equipment, powered by transformers and overhead lines. Mainly used in mines where there is no risk of explosion. Because of its special power supply mode, the trolley electric locomotive has no limit on the cruising range. Therefore, it is suitable for long-term and long-distance use. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method.
Adhesive / total weight (t) : 3 ton
Track gauge (mm) : 600.762.900
Traction (KN) : 6.1, 5.74
Max. Traction (KN) : 7.36
Speed(km/h) : 10.6, 7.5
Power (KW) : 12KWx1, 6.5KWX2
Dimensions Length(mm) : 2700, 2750
Width(mm) : 940,1102or 1240
Height(mm) : 1550, 1500
Wheelbase (mm) : 816, 850
Wheel diameter (mm) : 650, 850
Min Curve radius (m) : 5.7, 6
Controller : Resistencia or IGBT
Braking method : Mechanical

Advantages of our product
1.Using high-quality steel plates, special rust removal process make sure it more anti-corrosion and suitable for harsh mining environment.
2. Producing motors ourselves, using high lever insulation material and pure copper, ensure the powerful traction force, and suitable for harsh mining environment.
3.Gear anastomosis surface to reach more than 80%, which is far more exceeding the standard.
4.Professionally designed and adjusted frame ensure safe driving and avoids falling off rails.
5.A variety of braking methods can be choose, air brake, hydraulic brake, electric brake, mechanical brake to ensure the safety drive.
6. 40 years richful experience with the ability to design and make customized product according to your requirements.
7. Proving factory online-visiting

Factory Test
Mining Locomotive test
1.Before Running the locomotive,carry out gear debugging, lighting, gear, and brake adjustment etc.To ensure the normal operation of the locomotive.
2.Carry out a tensile test before leaving the factory to ensure the load performance of the locomotive meets the standard. Our design standards generally exceed the national standard by 10%-20%.
3.Carry out different type running test before leaving the factory to ensure the performance and normal operation of the whole locomotive. It can adapt to various harsh conditions under simulated working conditions.
Motor test
The motor has to go through many inspection procedures before leaving the factory, and each motor has to be carried out with load running experiments.
Explosion-proof motors are carried out with water pressure test.
All the test of motor is to ensure that can adapt to harsh working conditions.

Adhesive / total weight (t) 7 ton
Track gauge (mm) 600,762 or 900
Traction (KN) 13.05kN/ 15.09kN
Max. Traction (KN) 17.2kN
Speed(km/h) 11km/h
Voltage 250V or 550V
Power (KW) 21kw *2 or 24 kw*2
Dimensions Length(mm) 4550mm
Width(mm) 1050,1212 or 1350mm
Height(mm) 1550mm
Wheelbase (mm) 1600 mm
Min Curve radius (m) 7 m
Wheel diameter (mm) 680mm
Controller Resistance or IGBT or AC controller
Braking method Mechanical or air Brake