Zsf Column Type Load Cell

PE coil pipes and tubes for water and wire cable conduit PL231


The PE coil pipes and tubes can be used:

water pipe 4 â?? 6 â?? 1-inch black coil with pressure 1.6mpa, OD 20-75mm, WT 2.3-6.8mm
pe conduit cable embedded wire cable and optical cable, OD 20-200mm, WT 1.8-3.5mm
weak current protection tube and communication tube, OD 20-200mm, WT 1.8-3.5mm


We use new 100% pure raw PE material


WHY NEW MATERIAL HDPE PIPES?

1. Health performance

PE pipe processing without adding heavy metal salt stabilizer, no scaling layer, and no bacteria.

2. Corrosion resistance

It can resist various chemical media erosion, with no electrochemical corrosion.

3. Service life

Under rated temperature and pressure conditions, PE pipes can be used for more than 50 years.

4. Impact resistance

PE pipe toughness, high impact strength, heavy objects directly pressed through the pipeline will not break.

5. Connection performance

The strength of the hot melt or electric melt interface of the polyethylene HDPE pipe is higher than that of the pipe body, and the joint will not be broken due to soil movement or live load.

6. Construction performance

It has a lightweight pipe weight, a simple welding process, convenient construction, and a low overall project cost.

GaAs Wafers
Gallium Arsenide (GaAs) wafers are critical components in modern electronics and photonics due to their superior electrical and optical properties.

Here�¢??s a focused overview:

GaAs�¢?? is shorthand for Gallium Arsenide, a compound made up of two elements, and the semiconductor used to manufacture GaAs wafers. GaAs is used as a direct bandgap semiconductor, which in layman�¢??s terms, simply means that particles such as electrons can pass through components much quicker and with very little interference. This makes them particularly useful in optical devices because photons, the basic unit for all light, can pass through lenses with ease.

What are GaAs Wafers Use For?

The use of GaAs wafers is dictated by the capabilities of the compound. Because GaAs is a direct bandgap semiconductor, it is especially useful in sensitive electronic equipment that requires amplifying low frequencies. Some of the most common applications for GaAs wafers include:

Radars

Radio communication equipment

Tachometers

Satellites

Microwave

LEDs

Rated capacities (emax) 10, 15, 20, 25, 30, 40, 50t
Sensitivity2.0±0.002mv/v
Accuracy class C2c5
Zero balance
±1%emax
Tc zero±0.02%f.S/10°c
Tc span±0.02%f.S/10°c
Input resistance 400±20(zsf), 700±20(zsfy)
Output resistance 350±3;352±515m)(zsf);706±7(zsfy)
Insulation resistance5000m(50v dc)
Temperature, compensated -10°c+40°c
Temperature range, operating
-30°c+70°c
Maximum safe overload 150%emax
Ultimate overload 250%emax
Excitation, recommended 1012v dc
Excitation, maximum 15v dc
Protection class Ip68
Construction Alloy steel ; stainless steel
Cable Length:8m(10t), 10m(15t), 12m(2025t);14m(30t);16m(4050t)
Diameter: :5mm

All Types Of LV and MV Power Cables , LSFH, SOLAR, Instrument and Special Cables
COOPER Rod 8 mm and Copper Wire
PVC COMPOUNDS

The Variable Speed Drive FRENIC series is equipped with functions and performance to meet all types of requirements, and in addition it is easily maintained and environmentally friendly. The series lineup ranges from simple to advanced-function models, enabling model choices matching situations for use. Fuji Electric provide Variable Speed Drives perfect for automating and with energy saving devices like a fan pump or carrier and variable speeds.

Fuji's servo system can be adapted to several types of motion control, from high-function like synchronization and interpolation to simple-function motion control like Point-to-Point positioning. Meanwhile, the improved auto-tuning function and new option like servo operator make the machine control with high-speed and high-accuracy be achieved more easily.

Product Overview

The ignition point of a fire inside the electric panel is mostly the part where the terminal block is fastened, so in order for initial fire extinguishing, the solution should be closely installed to the part where the terminal block is fastened.
In the case of a small electric panel, a complete initial fire extinguishing is expected for fires occurring inside the electric panel by attaching the SFEX Pad to the top surface of the electric panel.

Product Feature

It has an excellent performance in the initial fire suppression as it can be installed near the ignition point as a flexible rope type.
It uses a stand-alone method based on polymer chemistry so that it does not cause malfunctions and maintenance costs.
The thermo-responsive Granule composed of KNO3 and subsidiary catalysts It does not affect the peripherals after the fire goes out.
Function of SFEX Granule = fire extinguishing agent storage tank + temperature sensor + nozzle function
Fire extinguishing method : Suffocation + subsidiary catalyst


Example of Installation 1 : SFEX Line - If ducts exist

Installing the SFEX Line horizontally or vertically in the ducts closest to the expected ignition points
It can be installed without damaging the panel



Example of Installation 2 : SFEX Line - If ducts do not exist

Installing the SFEX Line horizontally or vertically, close to the expected ignition points of the Electric panel



Example of Installation 2 : SFEX Pad - Small Electric Panel

Simply attach it to the top inside the Electric panel.

Beam Type Load Cell-SB2.