Vertical Form Fill And Seal Machines

VP-420S
VP-520S
VP-620

A humble yet reliable & cost effective design to cater for edible oil & dairies industry.
* specially design heat sealing jaws & serrated knife
* plc tracking system for machine function adjustment
* high force indexing belt for smart material handling
* independence pneumatic cylinder & cam system
* servo drive control for film precise & speed traveling
* fool proof film sensing via encoder
* applicable for all heat sealable films
* pillow pack or three side seal pack
* fast changeover time for various former size
* optionally to comply with various packaging style with gussetted, block bottom, 4 side seal & etc

Standard features
Stainless steel construction
Servo motor controlled film pull belts
Servo motor controlled jaw seal actuation
Mitsubishi touch screen operator interface
Mitsubishi plc - based control system
Automatic program set-up
Instant program changeover
Mark sensor (fiber optic) registration control
Quick change former assembly
Product clamp and settler
Full safety guarding and interlocks (option)
Ce approved electrical
Accessories and options
Polyethylene seal systems
Material stopper
Load shelf for heave bag support
Tear notches
Nitrogen gas flush systems
Hole punch (round or euro)
Vacuum assist units
Static eliminators
Gusseted device
Special power requirement
Transformers for non-standard voltage
Special end-seal configurations

Model bx-400 bx-600 bx-700
Bag width: 50-160mm on pillow bag 75-240mm on pillow bag 90-285mm on pillow bag
Bag length: up to 200mm on a single pull up to 300mm on a single pull up to 330mm on a single pull
Speed: max. 100bpm(single pulling)
Max. 50bpm(double pulling) max. 100bpm(single pulling)
Max. 40bpm (single pulling) max. 100bpm(single pulling)
Max. 40bpm(double pulling)


Actual speeds are dependant upon product characteristics, bag size, packaging material, filling system etc.
Electrical 220 vac +5%/-10%, 1° with ground (pe), 50 hz 3.5kw service required
Air consumption 0.2m3/min @ 6 bar for 100 bpm
Temperature nominal ambient 10-35¦c (50-95¦f)
Humidity less than 90% non-condensing




850kg 1700*1500*1900mm

Vertical form fill seal machine (BM-series)

Main Standard Features
Painted mild steel construction, high value at low cost
Touch screen interface, easy to use and operate
PLC controller, ensures ease of operation
Electronic temperature control.
Servomotor is loaded for double film pulling belt.
Date printer is automatically set.
Mark sensor (Photo eye) for registration film
Quickly format changes, no tools required.
All products contact parts are stainless steel.
Available Options
Gas flushing (Air or Nitrogen gas)
Tear notch
Gusseted device
Air expeller
Hole punch device
Material stopper
Bag support
Polyethylene sealing system
Vacuum bag system

Model BM-600 BM-700
Packing Speed 25-60bag/min 25-60bag/min
Bag length(mm) 100-300 100-330
Bag with (mm) 70-240 70-285
Air Consumption 0.36m3 (Normal)/min, 0.6Mpa 0.4m3 (Normal)/min, 0.6Mpa
Film Roll Outer:ª¦400mm; Core inner : ª¦75mm Outer:ª¦420mm; Core inner: ª¦75mm
Power supply 220V, 50HZ, 3KW 220V, 50HZ, 3KW
Dimensions(LxWxH) 1650x1300x1700mm 1680x1400x1850mm




700KG 1680x1400x1850mm

Product To Be Packed - Powder
Machine - Schute Base Ffs
Control - Continuous Motion
Temperature Controller - Pid/digital Type
Speed Control - Step Less Output Speed Control By Vfd
Unwinding System - Simplex
Sealing System - Heat Sealers
Pouch Type - Centre Seal Pouch/three Side Seal/four Side Seal
Filling System - Cup Filling System
Product Hopper Capacity - 8-15 Kg
All Product Contact Parts - All Contact Parts Food Grade Stainless Steel
Motor - ½ H.P 1 Phase-crompton Make
Power Supply - 220 V + 2% With Neutral Ac Supply At 50 Hertz.
Accuracy - + 2%
Machine Weight - Approx 300kg
Speed - Up To 60ppm
(depending Upon The Product And Quantity To Be Packed)
Output & Accuracy Depends On Following:
Filling System

Machine Type :- Schute Based Pneumatic F.F.S Machine
Filling System :-cup Filler
Packing Weght :- 10-100gms
Product To Be Pack :- Snacks/tea
Covering :- Full Stainless Steel
Speed :- Upto 50 Ppm
Special :-digital Temperature Controller With Pouch Counter Meter.
And All Pneumatic System Is Janatic /festo Etc Make.
Motor :- 1/2 H.P Single Phase-01 No:: 1-1/2h.P 3phase-01 No:1h.P 3phase-01no
Clutch Brake-15 Torque-01no: All Motors Are Crompton Make

Weight :-400 Kgs (approx)
Filling Accuracy :- +/- 2% Depending Upon Product And Its Density

Specifications:
Pouch Width-(min=20mm/max=130mm)

Description:


This complete weighing & packaging line system is composed of a product feeder & conveyor, a 10 head weigher, a support platform with staircase, a bh-600 vffs machine, a discharge conveyor, a checkweigher & rotary collecting table.


The line features stainless steel versions of critical components and is ideally suitable fro packing dry, non-fragile products into a wide range of pack styles, using many different kinds of wrapping materials.


The most suitable weighers and baggers will depend upon speed and pack style requirements, product characteristics and film specifications.

A full set including:


Vibration feeder
Bucket coveyor (or l-shaped conveyor)
Multihead weigher
Platform & shelf
Vertical form fill seal machine
Output conveyor
Check weigher
Metal detector
Rotary collection table
Following devices are optional

Nitrogen flushing device
Hole punch device (round hole/euro hole)
Polyethylene sealing system
Gusseted device
Product stopper
Vacuum bag device
Additional former
Tear notched

2*4*4m