Rust-Oleum Satin Fossil - 249080

RustOleum Painter's Touch Ultra Cover 2X 12 oz. Satin Fossil General Purpose Spray Paint delivers twice the coverage as other competitive brands. Double Cover Technology provides ultimate hiding power and is a Paint and Primer in One allowing projects to be completed quickly.

Product Features :
Brand : RustOleum
Model Number : 249080
Color : Satin Fossil
Type : Spray Paint
Sube Type : Satin
Weight : 12 oz.
Care Instructions : Use outdoors or in a well ventilated area such as an open garage. Remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with a commercial detergent or other suitable cleaning method. All surfaces must be dry at time of application. Shake can vigorously for one minute after the mixing ball begins to rattle. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply two or more light coats a few minutes apart to avoid drips and runs. Do not use near open flame.
Details : Interior/exterior use on wood, metal, plastic and more
Designed to provide long lasting protection and durability
Covers up to 50 sq. ft.
Satin finish provides a low sheen look, creating a durable and protective surface
Comfort spray tip with wider finger pad reduces finger fatigue and offers 360°, any angle spray technology
Dries to the touch in 20 minutes
Oil based formula contains breakthrough technology, delivers twice the coverage
Paint and primer in one
Designer & everyday colors suited to meet all consumer needs
Twice the coverage, twice as fast
Comfort Tip and Any Angle Spray technology
Excellent indoor/outdoor durability
Bonds to wood, metal, plastic and more
Clean up with mineral spirits

Rust Remover (desoxydant)

* PHOSCAST
Phoscast : Phosphate Bonded Castables

* PURPOSE
customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system.

BACKGROUND

* Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles.

* GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates.
Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion

* Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected.

APPLICATION
Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.

Fabric
Roof:500g/m�² PVC UV Waterproof
Sidewall:380g/m�² PVC UV Waterproof
PVC church window

Frame
Pole: 38x1.0mm
Connector:42x1.2mm
Ground frame + reinforcement bar
Anti rusted galvanized pipe or powder coated steel pipe
Size

Width:6.0m Length:12m
Sideheight : 2m
Center height :3.05m
Ground area: 72sqm

*The engine adopts famous brand engine, 100% inspection before delivery.
*The Snow Cleaning Machine adopts full metal jacket design,after oxidation spray,anti-corrosion rust proof,long service life.
*Double LED lamp of operation panel, greatly improving the workers efficiency and safety at night and early morning.
*The Snow Cleaning Machine uses monolithic auger design, low cost of vulnerability consumption and easy replacement.
*The Snow Cleaning Machine has the advantages of fashion appearance,mult functions, light and flexibility,simple operation.

ARP329
Body Guard Undercoating is a premium undercoating material with corrosion protection, excellent spray pattern, coverage and adhesion; protects underbody parts from rust and stone chipping.

Rust-Oleum Painter's Touch Ultra Cover 2X 12 oz. Satin Granite General Purpose Spray Paint delivers twice the coverage as other competitive brands. Double Cover Technology provides ultimate hiding power and is a Paint and Primer in One allowing projects to be completed quickly. A great value.

Interior/exterior use on wood, metal, plastic and more

· Designed to provide long lasting protection and durability

· Covers up to 50 sq. ft.

· Satin finish provides a low-sheen look, creating a durable and protective surface

· Comfort spray tip with wider finger pad reduces finger fatigue and offers 360°, any-angle spray technology

· Dries to the touch in 20 minutes

· Oil based formula contains breakthrough technology, delivers twice the coverage

· Paint and primer in one

· Clean up with mineral spirits

Our stainless steel, brass, and aluminum trunk handles are designed for durability, functionality, and style. Stainless steel handles provide excellent corrosion resistance, making them ideal for heavy-duty use and harsh environments. Brass handles offer a classic, elegant look with high resistance to rust and tarnish, adding a touch of sophistication to any trunk. Aluminum handles are lightweight, yet strong and corrosion-resistant, perfect for those seeking both durability and ease of use. All our trunk handles can be customized in terms of size, finish, and design, ensuring they meet the specific needs of different industries and projects worldwide.