1.General features
• small size product
• product free from lead, cr(6+), cd and hg
• humidity calibrated within +/-2% @55%rh
• typical 1 to 3.6 volt dc output for 0 to 100% rh at 5vdc supply
• ratiometric to voltage supply from 4.75vdc to 5vdc
• patented solid polymer structure
2..Description
Based on the rugged hs1101lf capacitive humidity sensor, hm1500lf is a dedicated humidity transducer
Designed for oem applications where a reliable and accurate measurement is needed. Direct interface with a
Micro-controller is made possible with the module’s linear voltage output.
3.Features
• full interchangeability
• high reliability and long term stability
• not affected by water immersion
• very low temperature dependence
• suitable for 3 to 10 vdc supply voltage
4.Applications
• industrial
• process control
Humidity sensor specific features
Instantaneous de-saturation after long periods in
Saturation phase
Fast response time
Part could be washed with distilled water
We just processed in a large batch of chipsets. I posted below current inventory and attached pictures of each type of chipset. Please review and let me know your interest/offer.
Chipset 1 (H61) â?? 3,350 units
Chipset 2 (H81) â?? 2,206 units
Chipset 3 (H55) â?? 436 units
Chipset 4 (B250) â?? 1,600 units
Chipset 5 (SR406) â?? 345 units
Our most advanced intelligent spot detectors, multi-criteria/multi-sensor devices use multiple sensors to detect various conditions in an environment sensing a wider range of fires with greater accuracy.
Features & Benefits:
Multi-Criteria/Multi-Sensor smoke detection
Unique ability to detect major elements of a fire
Highest nuisance alarm immunity
Advanced algorithms interpret and respond to multiple inputs
INDIUM PHOSPHIDE (InP) WAFERS are semiconductor materials made of indium phosphide, a compound semiconductor that is widely used in high-frequency and optoelectronic applications. Due to its efficient electron mobility and direct bandgap properties, InP is favored for devices such as:
High-speed electronics
Laser diodes
Photodetectors
Telecommunications applications, including optical fiber communication
We offer the following InP Wafers:
Undoped InP Wafers: These are pure InP with no intentional doping, used in various applications where intrinsic properties are required.
N-type InP Wafers: Doped with donor impurities (such as tellurium) to increase electron concentration, useful in transistors and high-speed electronics.
P-type InP Wafers: Doped with acceptor impurities (such as zinc) to create holes in the semiconductor, used in light-emitting devices and other optoelectronics.
InP Substrates: Used as a base for growing other semiconductor materials in heterostructures for various applications.
InP Membrane Wafers: Thin layers of InP used for specific applications, including applications in flexible electronics and advanced photonic devices.
InP-based Quantum Dot Wafers: Engineered to create quantum dots that can be used in photonic and optoelectronic devices for enhanced performance.
Name of Product : Arecanut palm leaf plates and cups.
Made of : Arecanut palm tree leaf (Sheath).
Nature of product: Purely natural & Eco-friendly, Chemical free.
Botany name : Areca catechu Linn.
Manufacturing method: Getting shape by hydraulic mechanical press with heated metal
mould.
Product Specification
Shapes : Round, Oval, Square, Rectangle, Hexagonal. .Etc.
Thickness : 2-4 mm
Depth : 20-35 mm
Size : 100 mm-300 mm
Above Sizes as follows: Apart from the below sizes, we can tailor to any preferred size and shape
depending on the requirement.
18 cm â?? Rectangle
20 cm - Round Side
24 cm â??Square
25 cm - Hexogen Main
25 cm-Rectangle Plate
25 cm - Round Plate
13 cm â?? Heart
13 cm - Dip Bowl
16 cm Rectangle
17cm Square
18 cm Round Bowl
24 cm Square New
We are proud to say that for the first time in India, we are launching Battery temperature sensors for commercial purposes.
The specialty of the sensor is that we can measure the in situ temperature. So far, the widely popular technique is to monitor the battery temperature by placing a sensor adjacent to it. As expected, the accuracy of this method is not up to the mark. Now with the advent of Arcotherm's unique sensors, more accurate values can be obtained. Currently, we are exporting these to the European market.
We manufacture Automobile Industry related temperature sensors. In BULK:
1) Automatic transmission (position sensor and ATF temperature sensor)
2) Motor temperature sensor
3)Battery temperature sensor/ current senso
4) Exhaust gas temperature sensor (recirculation)
5) Ambient air temperature sensor
6) Steering wheel and seat heat temperature sensor
7) Air duct temperature sensor
DTZ-400G Series Surface Temperature Calibration System is primarily used to calibrate surface sensors of various sizes and types, such as thermistors, film sensors, surface resistance thermometers, ribbon sensors, surface thermocouples, and more. The product consists of a controller and a heater. It is easy to operate, intuitive to display, and can be heated simply by setting the temperature.The temperature rises rapidly and the multi-stage PID temperature control is accurate. The effective use range is up to 130mm in diameter and has a communication interface to communicate with the computer. This product can be used as an infrared camera calibration source if it is slightly changed.
Product Features
1.The calibration temperature can reach 400 The temperature rises and the temperature drops quickly.
DTZ-400 surface temperature calibration system has a good temperature rise and fall, from room temperature to 400, only 30 minutes, from 400 to room temperature, with a rapid cooling device only 50 minutes, greatly improving work efficiency .
2.Calibration plate diameter up to 130 mm, meeting most surface temperature sensor calibration needs
130mm and is sufficient for calibrating surface sensors of various sizes and types, such as thermistors, film sensors, surface resistance thermometers, ribbon sensors, surface mount thermocouples, etc.
3.External reference platinum resistance thermometer to reduce calibration uncertainty
In order to achieve the ultimate in calibration accuracy, the design engineer deliberately reserved a thermometer socket at the bottom of the aluminum surface. platinum resistance thermometer with a diameter of 5 mm can be inserted as a standard for comparison and calibration, which greatly improves the calibration accuracy.
4.Excellent uniformity of temperature and surface finish on the calibration plane
Surface sensors are often difficult to calibrate because it is difficult to find a flat, uniform source of surface temperature.The DTZ-400 Surface Temperature Calibration System utilizes aluminum as the surface and has a high finish that ensures that the calibrated sensor is in good contact with the surface temperature calibrator, reducing calibration uncertainty. The DTZ-400 uses a special heating material and a constant temperature structure to make the surface temperature more uniform.
5.Temperature control is accurate, stable, and overshoot temperature is small
The device provides a variety of parameter options for the user to choose, including setting the PID parameters of the high,medium and low temperature segments, the inflection point between different temperatures, and the alarm temperature.
6.Portable and easy to use
The weight of the whole machine is only 3.5kg, which is small and portable.
Take temperature readings from a distance, or underwater, using this Waterproof DS18B20 Digital Temperature Sensor. It's got a 90cm (0.9m) cable with a stainless steel, PVC coated probe at the end. You'll be able to use it with any 3V-5V system, and take temperature readings with an accuracy of 9-12 Bits (configurable in code). The best part is that it's digital, meaning you won't suffer any signal degradation over the longer distance.
Waterproof - Take the temperatures of liquids/moist environments with the stainless steel probe. It's shrouded in PVC plastic too, meaning it will hold it's own in temperatures up to 100 degrees Celsius.
Temperature - Usable from -55 degrees Celsius to 125 degrees Celsius. Accuracy of 0.5 degrees.
Digital - The digital interface used to relay the readings guarantees minimal signal degradation over the longer distances (90cm for this standard cable)
1-wire interface - You can have multiple DS18B20s connected to the same central micro-controller pin as each device has a unique identifier hard-coded in.
Long range - 1.5 meters of cable by default, but you can make it longer if needed
Maker friendly - The DS18B20 chip is able to be powered with 3v - 5.5v which is perfect for maker platforms .
HOOK-UP GUIDE
This sensor is simple, you've got 3 wires (Power, Ground and Data). You simply need to connect the data pin to an input pin on your micro-controller and the power and ground to power and ground
You'll also need to connect a resistor between power and signal wires, as shown in the circuit diagram on the Sensor's wiki page.
Specifications
TECHNICAL SPECIFICATIONS
Compatible with 3.0V to 5.5V systems (development board etc)
Within 0.5 degrees Celsius accuracy
Recommended usable temperature range: -55 to 125 degrees Celsius
Select-able 9-12 bit resolution (Factory Default at 12-bit)
1 Wire Interface
Unique 64 bit ID for each sensor
Query time is less than 750ms
Stainless steel tube 6mm diameter by 35mm long
Cable diameter: 4mm
Cable Length: 90cm 100cm 200cm or Customized
Technology character
